Journal of shanghai Jiaotong University (Science) ›› 2012, Vol. 17 ›› Issue (3): 350-355.doi: 10.1007/s12204-012-1285-x
• Articles • Previous Articles Next Articles
RONG Hui (荣辉), QIAN Chun-xiang (钱春香)
Online:
2012-06-30
Published:
2012-11-15
Contact:
QIAN Chun-xiang (钱春香)
E-mail:cxqian@seu.edu.cn
CLC Number:
RONG Hui (荣辉), QIAN Chun-xiang (钱春香). Development of Microbe Cementitious Material in China[J]. Journal of shanghai Jiaotong University (Science), 2012, 17(3): 350-355.
[1] Qian C X, Pan Q F, Wang R X. Cementation of sand grains based on carbonate precipitation inducedby microorganism [J]. Science China Technological Sciences,2010, 53(8): 2198-2206.[2] Metayer-levrel G L, Castanier S, Orial G, et al. Applications of bacterial carbonatogenesis to theprotection and regeneration of limestones in buildings and historic patrimony [J]. Sedimentary Geology, 1999, 126: 25-34.[3] Nemati M, Voordouw G. Modification of porous media permeability, using calcium carbonate producedenzymatically in situ [J]. Enzyme and Microbial Technology, 2003, 33: 635-642.[4] Dejong J T, Fritzges M B, Nusslein K. Microbially induced cementation to control sand responseto undrained shear [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2006, 132: 1381-1392.[5] Dejong J T, Mortensen B M, Martinez B C, et al. Bio-mediated soil improvement [J]. Ecological Engineering, 2010, 36: 197-210.[6] Whiffin V S. Microbial CaCO3 precipitation for the production of Biocement [D]. Western Australia:School of Biological Sciences and Biotechnology, Murdoch University, 2004.[7] Whiffin V S, van Paassen L A, Harkes M P. Microbial carbonate precipitation as a soil improvementtechnique [J]. Geomicrobiology Journal, 2007, 24: 417-423.[8] Ivanov V, Chu J. Applications of microorganisms to geotechnical engineering for bioclogging and biocementationof soil in situ [J]. Review Environmental Science Biotechnology, 2008, 7: 139-153.[9] Muynck W D, Belie N D, Verstraete W. Microbial carbonate precipitation in construction materials:A review [J]. Ecological Engineering, 2010, 36: 118-136.[10] Muynck W D, Verbeken K, Belie N D, et al. Influence of urea and calcium dosage on the effectivenessof bacterially induced carbonate precipitation on limestone[J]. Ecological Engineering, 2010, 36: 99-111.[11] Muynck W D, Debrouwer D, Belie N D, et al. Bacterial carbonate precipitation improves the durabilityof cementitious materials [J]. Cement Concrete Research, 2008, 38: 1005-1014.[12] Qian C X, Wang J Y, Wang R X, et al. Corrosion protection of cement-based building materials bysurface deposition of CaCO3 by Bacillus pasteurii [J].Materials Science and Engineering C, 2009, 29: 1273-1280.[13] Nemati M, Greene E A, Voordouw G. Permeability profile modification using bacterially formed calciumcarbonate: Comparison with enzymic option [J]. Process Biochemistry, 2005, 40: 925-933.[14] Rong H, Qian C X, Li L Z. Influence of molding process on mechanical properties sandstone cemented bymicrobe cement [J]. Construction and Building Materials, 2012, 28: 238-243.[15] Ferris F G, Phoenix V, Fujita Y, et al. Kinetics of calcite precipitation induced by ureolytic bacteria at10 to 20℃ in artificial groundwater [J]. Geochimicaet Cosmochimica Acta, 2003, 67(8): 1701-1722.[16] Fujita Y, Ferris F G, Lawson R D, et al. Calcium carbonate precipitation by ureolytic subsurface bacteria[J]. Geomicrobiology Journal, 2000, 17(4): 305-318.[17] Warren L A, Maurice P A, Parmar N, et al. Microbially mediated calcium carbonate precipitation:Implications for interpreting calcite precipitation and for solid-phase capture of inorganic contaminants [J].Geomicrobiology Journal, 2001, 18(1): 93-115.[18] Chaturvedi S, Chandra R, Rai V. Isolation and characterization of Phragmites australis (L.) rhizospherebacteria from contaminated site for bioremediation of colored distillery effluent [J]. Ecological Engineering, 2006, 27: 202-207. [19] Simon M A, Bonner J S, Page C A, et al. Evaluation of two commercial bioaugmentation productsfor enhanced removal of petroleum from a wetland [J]. Ecological Engineering, 2004, 22: 263-277.[20] Qian C X, Wang R X, Cheng L, et al. Theory of microbial carbonate precipitation and its applicationin restoration of cement-based materials defects [J]. Chinese Journal of Chemistry, 2010, 28(5): 847-857.[21] Wang Rui-xing, Qian Chun-xiang. Restoration of defects on the surface of cement-based materials by microbiologyprecipitated CaCO3 [J]. Journal of the Chinese Ceramic Society, 2008, 36(4): 457-464 (in Chinese).[22] Wang Jian-yun, Qian Chun-xiang, Wang Rui-xiang, et al. Application of carbonate-mineralization bacteriumin surface protection of cement-based materials [J]. Journal of the Chinese Ceramic Society, 2009, 37(7): 1097-1102 (in Chinese). |
[1] | WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen. Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358. |
[2] | ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui. Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61. |
[3] | WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756. |
[4] | YU Xiaokang (俞小康), YE Jia (叶佳), WU Chunxiang (吴春祥), MA Guohong∗ (马国红). Effect of Cu Addition on the Microstructure and Mechanical Properties of U-MIG Welds on Galvanized Steel Sheets [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 757-764. |
[5] | GUO Deping, LI Zheng, PENG Senlin, ZENG Zhikai, WU Daifeng. Numerical Calculation Method for Crack Dynamic Propagation Based on Newmark Implicit Time Integration Scheme [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 689-697. |
[6] | TANG Jingzhao, YAN Jiawei, SHEN Yao. Effect of Silicon State on Microstructure and Properties of Al-1%Si Alloy During Severe Plastic Deformation [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 249-257. |
[7] | RONG Hui, WEI Guanqi, QIAN Chunxiang, ZHANG Lei, ZHANG Ying, XU Rui . Mechanism of MSWI Fly Ash Solidified by Microbe Cement [J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 519-525. |
[8] | DUAN Yu (段宇), KIM Cholgyong (金哲景), XU Guobin (徐国宾). Temperature Drop Model Based on Discrete Element Method for Simulating Damage of Bio-Cemented Sand by Cold Wave [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 789-798. |
[9] | JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157. |
[10] | YU Qian,ZHANG Wenguang,YIN Xuele. Surface Properties of Neural Electrodes Based on Oriented Electrodeposition [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1308-1315. |
[11] | LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388. |
[12] | WANG Wei, CHEN Guo-min, CHEN Qi, LU Yu, ZHANG Zong-chao. Reliability Calculation Analysis and Risk Assessment of Submarine Pipelines Under Corrosion Defects [J]. Ocean Engineering Equipment and Technology, 2018, 5(6): 390-395. |
[13] | WU Hao,YI Peiyun,PENG Linfa,LAI Xinmin. Numerical Analysis of the UV Curing and Demolding Process for High Aspect Ratio Micro Structure [J]. Journal of Shanghai Jiaotong University, 2018, 52(12): 1603-1608. |
[14] | LAI Rui,CAI Yan,WU Yue,HUA Xueming. Effects of Beam Focus Position on the Duplex Stainless Steel#br# Fiber Laser Welded Joint Shape and Microstructure [J]. Journal of Shanghai Jiaotong University, 2017, 51(4): 418-. |
[15] | GU Yanhong1,MA Huijuan1,GAO Hui1,CHE Juntie1,JIAO Xiangdong1,TIAN Lu1,2. Microstructure and Local Corrosion Behavior of Friction Stud Welding of 16Mn Steel [J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1348-1354. |
Viewed | ||||||
Full text |
|
|||||
Abstract |
|
|||||