Gainscheduling Control Based on
 Linear Parameter Varying Model of Buck Converters

Abstract

Abstract: The output of switching converters can be easily influenced by the load and the line voltage. In this paper, a gain scheduling control based on a linear parameter varying (LPV) model of Buck converters is proposed to avoid this situation. Firstly, based on the small signal model of Buck converters, the LPV model with the load and the line voltage used as varying parameters is established by convex decomposing technique. Then, an LPV controller is designed with a structure of convex polytope using linear matrix inequality (LMI) technique. A system with this controller can have H∞ performances and all the closedloop system poles are located in a specific area. Finally, the simulation results show that the system with LPV controller has better performances than those with robust state feedback controllers.

Key words: Buck converter; linear parameter varying (LPV); gain scheduling control; H∞ control; convex decomposing technique; linear matrix inequality (LMI)

CLC Number:

TP 17

LUO Xu1，ZHANG Gansheng2，XIE Wei2. Gainscheduling Control Based on
Linear Parameter Varying Model of Buck Converters[J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 698-703.

References

［1］JIANG Wei, WANG Hongli, LU Jinghui, et al. HOSVDbased LPV modeling and mixed robust H2/H∞ control design for airbreathing hypersonic vehicle［J］. Journal of Systems Engineering and Electronics, 2016, 27(1): 183191.
［2］PONNATH A, FARRIS H E. Selfscheduled Hinfinity control of missile via linear matrix inequalities［J］. Journal of Guidance Control and Dynamics, 1995, 18(3): 532538.
［3］SHAMMA J S, ATHANS M. Analysis of gain scheduled control for nonlinear plants［J］. IEEE Transactions on Automatic Control, 1990, 35(8): 898907.
［4］KAJIWARA H, APKARIAN P, GAHINET P. LPV techniques for control of an inverted pendulum［J］. IEEE Control Systems, 1999, 19(1): 4454.
［5］OLALLA C, LEYVA R, EI AROUDI A, et al. Robust LQR control for PWM converters: An LMI approach［J］. IEEE Transactions on Industrial Electronics, 2009, 56(7): 25482558.
［6］NEMIROVSKI A, LAUB A, GHILALI M. LMI control toolbox for use with Matlab［M］. Natick, MA: Mathworks, 1995.
［7］俞立.鲁棒控制: 线性矩阵不等式处理方法［M］.北京:清华大学出版社, 2002.
［8］刘满,井元伟,张嗣灜.区域极点配置问题的研究方法［J］.控制与决策, 2005,20(3):241245.
LIU Man, JING Yuanwei, ZHANG Siying. Research approaches on pole assignment in specified region［J］. Control and Decision, 2005, 20(3), 241245.
［9］INTHAMOUSSOU F A, BIANCHI F D, DE BATTISTA H, et al. LPV wind turbine control with antiwindup features covering the complete wind speed range［J］. IEEE Transactions on Energy Conversion, 2014, 29(1): 259266.
［10］CHANG X H, YANG G H. New results on output feedback control for linear discretetime systems［J］. IEEE Transactions on Automatic Control, 2014, 59(5): 13551359.
［11］胡东，陈文华，周川.基于LMI的一类LPV系统的自调整输出反馈极点配置［J］.南京航空航天大学学报，1998,30(4):388394.
HU Dong, CHEN Wenhua, ZHOU Chuan. Self scheduling pole assignment of a class of LPV systems via output feedback based on LMIs ［J］. Journal of Nanjing University of Aaeronautics & Astronautics, 1998, 30(4):388394.
［12］SATO M, EBIHARA Y,PEAUCELLE D. GainScheduled StateFeedback controllers using inexactly measured scheduling parameters: Stabilizing and H∞ control problems［J］. American Control Conference, 2010, 3(4): 285291.
［13］TIEN H N, SCHERER C W, SCHERPEN J M A, et al. Linear parameter varying control of doubly fed induction machines［J］. IEEE Transactions on Industrial Electronics, 2016, 63(1): 216224.
［14］SATO M, PEAUCELLE D. Gainscheduled outputfeedback controllers using inexact scheduling parameters for continuoustime LPV systems［J］. Automatica, 2013, 49(4): 10191025.
［15］VEENMAN J, SCHERER C W. A synthesis framework for robust gainscheduling controllers［J］. Automatica, 2014, 50(11): 27992812.

[1]	ZHAO Ziren1, DU Shichang1, HUANG Delin1, REN Fei2, LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase#br# of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1166-1173.
[2]	ZHOU Penghui, MA Hongzhan, CHEN Dongping, CHEN Mengyue, CHU Xuening. Identification of Product Redesign Modules Based on#br# Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiao Tong University, 2017, 51(10): 1189-1195.
[3]	LI Changxi1, 2, ZHOU Yan1, LIN Han3, LI Lingzhi1, GUO Ge1. TemporalSpatial Sequential Fusion Recognition Method of#br# Ballistic Missile Target Based on MIMOFNN Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1138-.
[4]	FENG Mingyue, HE Minghao, HAN Jun, YU Chunlai. High Resolution Direction of Arrival Estimation Based on#br# Covariance Fitting Estimation of Signal Parameters by#br# Rotational Invariance Technique Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1145-.
[5]	?YANG Ping1,SHENG Jie1,WANG Yucheng2,LI Zhuyong1,JIN Zhijian1,HONG Zhiyong1. Quench Propagation Characteristics Influenced by NonUniform Properties of YBa2Cu3O7δ High Temperature Superconducting Tape [J]. Journal of Shanghai Jiaotong University, 2017, 51(9): 1090-1096.
[6]	WANG Xing, ZHOU Yipeng, TIAN Yuanrong, CHEN You, ZHOU Dongqing, HE Jiyuan. Sparse Decomposition for Frequency Modulation Radar Signal Based on#br# Advanced Genetic Algorithm and SinChirplet Atom [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1124-1130.
[7]	ZHANG Liangjun1, 2, LI Xiaoci1, WU Jingyi1, CAI Aifeng1. ThermalStructure Coupling Analysis of #br# Microgravity Environment Simulation Suspension Structure for #br# Large Space Deployable Mechanisms [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 954-961.
[8]	XIA Hailiang1, 2, LIU Yakun1, 2, LIU Quanzhen3, LIU Baoquan3, FU Zhengcai1, 2. Metal Ablation Affected by Electrode Shapes Under#br# Long Continuing Lightning Current [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 903-908.
[9]	GU Jiayang, XIE Yulin, TAO Yanwu, HUANG Xianghong, WU Jie. Numerical Simulation and Experimental Study on VortexInduced#br# Motion of a New Type of Floating Drilling Production Storage Offloading [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 878-885.
[10]	LIN Da, ZHU Yijia, WEI Xiaodong, WANG Zhiyu, ZHANG Wugao. Combustion and Particle Emission Characteristics Affected by#br# Fuel Supply Parameters for a Diesel Engine Fuelled with#br# Polyoxymethylene Dimethyl Ethers/Diesel [J]. Journal of Shanghai Jiao Tong University, 2017, 51(7): 787-795.
[11]	MENG Qingyang1, YAN Weiwu1, HU Yong1, CHENG Jianlin1, CHEN Shihe2, ZHANG Xi2. Model Identification Based on Subspace Model Identification of#br# Superheated Steam System in UltraSupercritical CoalFired Power Unit [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 672-678.
[12]	JIANG Huajuna, CAI Yana, b, LI Chaohaoa, LI Fanga, b, HUA Xueminga, b. Recognition Method for Gas Pores on XRay Image of Lap Joints#br# Based on the Improved Sobel Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(6): 665-671.
[13]	DONG Guanhua,YIN Qin,YIN Guofu,XIANG Zhaowei. Identification and Modeling of Coupling Dynamic Stiffness in Joints of Machine Tool [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1263-1434.
[14]	XIE Qijiang,YU Haidong. Coupling Relationship Between Loads on Cutterhead of Tunnel Boring Machine and Contact Stiffness of Gripper Shoes and Rocks [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1269-1275.
[15]	ZHONG Jianlin1,MA Dawei1,REN Jie1,LI Shijun2,WANG Xu3. Static Compression Analysis of Rubber Hollow Cylinder Based on Plane Strain Assumption [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1276-1280.