Microstructure Simulation of Q550D Ultra Low Carbon Bainite Steel

Abstract

Abstract:

Abstract： The experimental data obtained by hot compression experiment were used to establish a Q550D low carbon bainite steel dynamic recrystallization model and a cellular automata model. The microstructure evolution on the hot deformation process was simulated by using DEFORM3D finite element software. The simulation results show that the strain rate at a temperature of 1 150 °C for the 0.05 s-1 sample in the process of hot deformation microstructure have dynamic recrystallization and the grain size is refined. At a temperature of 1 050 °C when the strain rate is increased, the dynamic recrystallization austenitic grain size decreases. The simulation results agrees with the experimental results.

Key words: Q550D steel, dynamic recrystallization, cellular automaton, microstructure

CLC Number:

TG 142.1

DONG Hongbo,YU Xinping,ZHANG Wei. Microstructure Simulation of Q550D Ultra Low Carbon Bainite Steel[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 67-73.

References

［1］于庆波, 孙莹. 不同类型的贝氏体组织对低碳钢力学性能的影响［J］. 机械工程学报, 2009, 45(12): 284288.

YU Qingbo, SUN Ying. Effect of different bainitie microstructures on the mechanical properties of lowcarbon steel ［J］. Journal of Mechanical Engineer, 2009, 45(12): 284288.

［2］刘年富. 工程机械用低碳贝氏体钢Q550的性能与组织分析［J］. 钢铁钒钛, 2012, 33(2): 7781.

LIU Nianfu. Analysis on mechanical property and microstructure of low carbon bainite steel Q550 for engineering machinery use ［J］. Iron Steel Vanadium Titanium, 2012, 33(2): 7781.

［3］Hui F L, Lin X D, Xiang H L. Microstructure and mechanical properties of a low carbon bainitie steel ［J］. Steel Research International, 2013, 84(4): 352361.

［4］张熹, 董现春, 陈延清, 等. Q550D低碳贝氏体钢焊后热处理工艺的确定［J］. 机械工程材料, 2011, 35(6): 9092.

ZHANG Xi, DONG Xianchun, CHEN Yanqing, et al. Confirmation of heat treatment process after welding of low carbon bainitie steel Q550D ［J］. Materials for Mechanical Engineering, 2011, 35(6): 9092.

［5］高兵, 赵亚娟. 终轧温度和冷却速度对Q550D 钢组织和力学性能的影响［J］. 特殊钢, 2012, 33(3): 5760.

GAO Bing, ZHAO Yajuan. Effect of finishing temperature and cooling rate on structure and mechanical properties of steel Q550D［J］. Special Steel, 2012, 33(3): 5760.

［6］赵亚娟. 终轧温度对Q550D 组织和性能的影响［J］. 南钢科技与管理, 2011, 4(1):1514.

ZHAO Ya juan. Influence of finishing rolling temperature on microstructure and mechanical properties of Q550D plate ［J］. Nan Steel Science Technology and Management, 2011, 4(1): 1514.

［7］章威, 董洪波, 杨新. Q550D超低碳贝氏体钢动态再结晶行为［J］. 材料热处理学报, 2012, 33(12): 158162.

ZHANG Wei, DONG Hongbo, YANG Xin. Dynamic recrystallization behavior of Q550D low carbon bainitic steel ［J］. Transactions of Materials and Heat Treatment, 2012, 33(12): 158162.

［8］金朝阳, 崔振山. 低碳钢热塑性成形过程本构模型［J］. 上海交通大学学报, 2010, 44( 4) : 437 446.

JIN Zhaoyang, CUI Zhenshan. Constitutive model for high temperature plastic deformation of low carbon steel［J］. Journal of Shanghai Jiaotong University, 2010, 44(4): 437446.

［9］杨静, 徐光, 韩斌, 等. Q345B钢动态再结晶动力学模型研究［J］. 武汉科技大学学报, 2012, 35(2): 8588.

YANG Jing, XU Guang, HAN Bin, et al. Study of dynamic recrystallization of Q345B steel［J］. Journal of Wuhan University of Science and Technology, 2012, 35(2): 8588.

［10］易幼平，刘超，黄始全. 基于DEFORM3D的7050铝合金动态再结晶元胞自动机模拟［J］. 中南大学学报:自然科学版, 2010, 41(5): 18141820.

YI Youping, LIU Chao, HUANG Shiquan. Simulation of dynamic recrystallization for 7050 aluminium alloy on platform of DEFORM3D using cellular automaton［J］. Journal of Central South University: Science and Technology, 2010, 41(5): 18141820.

［11］Sarkar A, Chakravartty J K, Samajdar I. The avrami kinetics of dynamic recrystallization in cadmium ［J］. Metallurgical and Materials Transactions A, 2010, 41(10): 24662470.

［12］Jonas J J, Quelennec X, Jiang L, et al. The Avrami kinetics of dynamic recrystallization ［J］. Acta Materialia, 2009, 57(9): 27482756.

［13］Goetz R L, Seetharaman V. Modeling dynamic recrystallization using cellular automanton［J］. Scripta Mater, 1998, 38(3):405413.

［14］Goetz R L, Seetharaman V. Static recrystallization kinetics with homogeneous and heterogeneous nucleation using a cellular automata model［J］. Metal Meter Trans A, 1998, 29(8): 23072321.

［15］Jin Z Y, Cui Z S. Investigation on strain dependence of dynamic recrystallization behavior using an inverse analysis method ［J］. Materials Science and Engineering A, 2010, 527(13): 31113119.

[1]	CAO Huan, CAI Ao, CHEN Yangyu, ZUO Wenkang, CHEN Mantai. Behavior of High Strength Steel Butt Joints at Arctic Low Temperatures [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 533-540.
[2]	ZENG Jingbo, WANG Huoping. Effect of Heat Input on Microstructure and Mechanical Properties of FCAW-G Joints of Extra High Strength Steel [J]. Ocean Engineering Equipment and Technology, 2025, 12(1): 67-73.
[3]	WANG Lei, CHEN Zhe, WANG Haowei. Effect of Heat Treatment on Microstructure and Mechanical Properties of In-Situ Al Matrix Composite for Storage Tanks [J]. Air & Space Defense, 2024, 7(6): 112-119.
[4]	SU Yang, HAO Liang, LI Yangxin, ZENG Xiaoqin. Research and Development of High-Performance Magnesium Alloys for Aerospace Applications [J]. Air & Space Defense, 2024, 7(6): 1-11.
[5]	ZUO Xinde, CHEN Yi, LI Yang, LUO Zhen, AO Sansan. Effect of Adding Tantalum on Microstructure and Properties of NiTi Shape Memory Alloy Manufactured by Wire Arc Additive Manufacturing [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 382-390.
[6]	Ximeng Liu, Dan Zhao, John Wang. Challenges and Opportunities in Preserving Key Structural Features of 3D-Printed Metal/Covalent Organic Framework [J]. Nano-Micro Letters, 2024, 16(1): 157-.
[7]	WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen. Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358.
[8]	YU Xiaokang (俞小康), YE Jia (叶佳), WU Chunxiang (吴春祥), MA Guohong∗ (马国红). Effect of Cu Addition on the Microstructure and Mechanical Properties of U-MIG Welds on Galvanized Steel Sheets [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 757-764.
[9]	WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756.
[10]	TANG Jingzhao, YAN Jiawei, SHEN Yao. Effect of Silicon State on Microstructure and Properties of Al-1%Si Alloy During Severe Plastic Deformation [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 249-257.
[11]	JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
[12]	YU Qian,ZHANG Wenguang,YIN Xuele. Surface Properties of Neural Electrodes Based on Oriented Electrodeposition [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1308-1315.
[13]	LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388.
[14]	LAI Rui,CAI Yan,WU Yue,HUA Xueming. Effects of Beam Focus Position on the Duplex Stainless Steel#br# Fiber Laser Welded Joint Shape and Microstructure [J]. Journal of Shanghai Jiaotong University, 2017, 51(4): 418-.
[15]	JIN Xue,ZHU Ping,LI Han,WANG Qing. Research on Mechanical Properties of Locking Cap Lap Welds and Partitioned Seam Weld Model [J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1297-1303.