[1]WEI S T, LV D, LIU R D, et al. Similar and dissimilar resistance spot welding of advanced high strength steels: Welding and heat treatment procedures, structure and mechanical properties[J]. Science & Technology of Welding & Joining, 2014, 19(5): 427-435.
[2]汤忠斌, 徐绯, 许泽建, 等. 焊缝结构微区材料力学性能研究[J]. 机械强度, 2010, 32(1): 58-63.
TANG Zhongbin, XU Fei, XU Zejian, et al. Research on mechanical properties of micro-zones of welding line[J]. Journal of Mechanical Strength, 2010, 32(1): 58-63.
[3]张腾, 周友龙, 刘拥军, 等. 6061铝合金车体搅拌摩擦焊接接头微型剪切试验研究[J]. 电焊机, 2012, 42(10): 92-95.
ZHANG Teng, ZHOU Youlong, LIU Yongjun, et al. Research of the FSW joint of 6061 aluminum alloy by mini-shear-testing[J]. Electric Welding Machine, 2012, 42(10): 92-95.
[4]DORN L, LEI B. Derivation of the characteristic virtues of the tensile and fracture mechanics test from the results of the microshear test[J]. Schweissen und Schneiden, 1992, 44 (8): 145-147.
[5]PAVLINA E J, TYNE C J V. Uniform elongation and the stress-strain flow curve of steels calculated from hardness using empirical correlations[J]. Journal of Materials Engineering & Performance, 2015, 24(11): 4415-4420.
[6]朱浩川, 姚谏. 不锈钢材料的应力-应变模型[J]. 空间结构, 2011, 17(1): 62-69.
ZHU Haochuan, YAO Jian. Stress-strain model for stainless steel[J]. Spatial Structures, 2011, 17(1): 62-69.
[7]RAMBERG W, OSGOOD W R. Description of stress-strain curves by three parameters[J]. Technical Report Archive & Image Library, 1943(902).
[8]QUACH W M, HUANG J F. Two-stage stress-strain models for light-gauge steels[J]. Advances in Structural Engineering, 2014, 17(7): 937-949.
[9]BRUDER T, STRZEL K, BAUMGARTNER J, et al. Evaluation of nominal and local stress based approaches for the fatigue assessment of seam welds[J]. International Journal of Fatigue, 2012, 34(1): 86-102.
[10]AMODEO C M, LAI W, LEE J, et al. Failure modes of gas metal arc welds in lap-shear specimens of high strength low alloy (HSLA) steel[J]. Engineering Fracture Mechanics, 2014, 131: 74-99.
[11]杨锋平, 孙秦. 薄板搅拌摩擦焊焊缝区应力集中的有限元分析[J]. 焊接学报, 2007, 28(12): 109-112.
YANG Fengping, SUN Qin. Analysis of stress concentration in weld of sheets welded by friction stir welding using finite element method[J]. Transactions of the China Welding Institution, 2007, 28(12): 109-112.
[12]蔡新荣, 韦生, 吕增, 等. 304/304L和316/316L奥氏体不锈钢焊接性能的对比与分析[J]. 钢结构, 2012(S1): 366-369.
CAI Xinrong, WEI Sheng, L Zeng, et al. Comparison and analysis on welding performance between 304/304L and 316/316L austenitic stainless steels[J]. Steel Construction, 2012(S1): 366-369.
[13]AFSHAN S, GARDNER L. The continuous strength method for structural stainless steel design[J]. Thin-Walled Structures, 2013, 68(10): 42-49.
[14]ROSSI B, AFSHAN S, GARDNER L. Strength enhancements in cold-formed structural sections. Part II. Predictive models[J]. Journal of Constructional Steel Research, 2013, 83(4): 189-196.
[15]QUACH W M, QIU P. Strength and ductility of corner materials in cold-formed stainless steel sections[J]. Thin-Walled Structures, 2014, 83(1): 28-42.
[16]施欲亮, 朱平, 张宇, 等. 提高汽车碰撞仿真计算效率的网格规模控制方法[J]. 上海交通大学学报, 2008, 42(6): 905-909.
SHI Yuliang, ZHU Ping, ZHANG Yu, et al. Methods of the mesh dimension constraint for enhancing the simulation efficiency of vehicle crash[J]. Journal of Shanghai Jiao Tong University, 2008, 42(6): 905-909. |