Creep Life of Babbitt ZChSnSb11-6 of OilFilm Bearing

Abstract

Abstract:

Abstract： Aimed at the creep damage problem of bushing Babbitt ZChSnSb11-6 of oil-film bearing in operation, the creep test equipment was designed, and a creep test of ZChSnSb11-6 was conducted. Two kinds of steady-state creep constitutive equations based on Dom theory and the constant speed theory were respectively established by using the creep test data. The experiment indicates that the steadystate creep constitutive equation based on Dom theory has a higher calculation accuracy, with a relative error of 1.52%. Besides, a creep life calculation model of ZChSnSb11-6 of oil-film bearing based on steady-state creep constitutive equation of ZChSnSb11-6 was established. The service life of alloy under any working condition could be predicted. Moreover, the resistivity and hardness of alloy after creep were measured, and their relationship was analyzed. Furthermore, the creep life evaluation model of ZChSnSb11-6 based on the resistivity was established, and a method measuring the resistivity of alloy to evaluate the service life of bearing was proposed.

Key words: oil-film bearing, Babbitt, creep test, creep life, evaluation

CLC Number:

TG 113.25

WANG Jianmei,XUE Yawen,CAI Min. Creep Life of Babbitt ZChSnSb11-6 of OilFilm Bearing[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 62-66.

References

［1］Simmons T E, Contarini A, Gianni N, 等. 油膜轴承变形和压力分析［J］. 钢铁, 2009, 44(3): 9396.

Simmons T E, Contarini A, Gianni N, et al. Deflection and pressure analysis of oil film bearings［J］. Iron and Steel, 2009, 44(3): 9396.

［2］adek J, ustek V, Pahutova＇ M. An analysis of a set of creep data for a 9Cr1Mo0.2V steel［J］. Materials Science and Engineering A, 1997, 225(12): 2228.

［3］沙桂英, 徐永波, 韩恩厚. 铸造MgRE合金的显微结构及其蠕变行为［J］. 材料研究学报, 2003, 17(6): 603608.SHA Guiying, XU Yongbo, HAN Enhou. Microstructure and creep behavior of a cast MgRE alloy［J］. Chinese Journal of Materials Research, 2003, 17(6): 603608.

［4］杨慧, 李振红, 张质良. 20CrMnTi钢的温热变形行为及其数学建模［J］. 上海交通大学学报, 2005, 39(11): 17991802.

YANG Hui, LI Zhenhong, ZHANG Zhiliang. The warmhot deformation behavior and modeling of 20CrMnTi steel［J］. Journal of Shanghai Jiaotong University, 2005, 39(11): 17991802.

［5］Luca E, Nicola B. Primary creep modeling based on the dependence of the activation energy on the internal stress［J］. J Pressure Vessel Technol, 2012, 134(6): 061401.

［6］Chen J J, Yoon K B, Tu S T. Creep behavior of pressurized tank composed of functionally graded materials［J］. J Pressure Vessel Technol, 2011, 133(5): 051401.

［7］Jad J, Mahiuddin C, Garth P. Design for creep: A critical examination of some methods［J］. Engineering Failure Analysis, 2013, 27(1): 350372.

［8］GB/T2039—1997, 金属拉伸蠕变及持久试验方法［S］.

［9］闫焉服, 刘建萍，史耀武，等. 63Sn37Pb钎焊接头稳态蠕变本构方程的建立［J］. 焊接学报, 2005, 26(4): 2932.

YAN Yanfu, LIU Jianping, SHI Yuewu, et al. Constitutive relations on creep for 63Sn37Pb soldered joints［J］. Transactions of the China Welding, 2005, 26(4): 2932.

［10］杨建玺, 樊红朝, 曲廷敏, 等. 油膜轴承的承载性能分析与比较［J］. 轴承, 2004(8): 2526.

YANG Jianxi, FAN Hongchao, QU Tingmin, et al. Analysis and comparison of loadbearing characteristic of oilfilm bearing［J］. Bearing, 2004(8): 2526.

［11］湛利华, 李杰, 黄明辉, 等. 2524铝合金的蠕变时效行为［J］. 中国有色金属学报, 2013, 23(2): 320326.

ZHAN Lihua, LI Jie, HUANG Minghui, et al. Creep ageing behavior of 2524 aluminum alloy［J］. The Chinese Journal of Nonferrous Metals, 2013, 23(2): 320326.

［12］Tabuchi M, Takahashi Y. Evaluation of creep strength reduction factors for welded joints of modified 9Cr1Mo steel［J］. J Pressure Vessel Technology, 2012, 134(3): 0314016.

[1]	LIU Kai1 (刘凯), DANG Wei1 (党炜), ZOU Tianji1,2∗ (邹田骥), LÜ Congmin1 (吕从民), LI Peng1,2 (李鹏), ZHANG Haitao1 (张海涛). Reliability Evaluation of Two-Phase Degradation Process with a Fuzzy Change-Point [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 867-872.
[2]	LU Guannan1 (卢冠男), WANG Mengling1∗ (王梦灵), FOX Tamara2, JIANG Peng3 (蒋鹏), JIANG Fusong3 (蒋伏松). Novel Indicators for Adverse Glycemic Events Detection Analysis Based on Continuous Glucose Monitoring Neural Network Predictive Models [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 498-504.
[3]	ZHANG Dayuan, JIANG Desheng, CHEN Guanyu, MENG Feixiang. Research on Evaluation Method of Surface-to-Air Missile System Survival Effectiveness Based on Remaining Operational Capability [J]. Air & Space Defense, 2022, 5(4): 24-29.
[4]	WANG Wenbin, ZHENG Shujiang, FAN Ruixiang, CHEN Wen, ZHOU Shiyang. Performance Evaluation Index and Method of Micro-Grid Distributed Electricity Trading Under the Background of “Carbon Peaking and Carbon Neutrality” [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 312-324.
[5]	LUO Jing, ZHANG Yinan. Operational Effectiveness Evaluation Method of Reconnaissance and Strike Integrated UAV Equipment Based on Improved Grey-AHP [J]. Air & Space Defense, 2022, 5(2): 1-7.
[6]	HU Yikai, WANG Chunxiang, YANG Ming. Decision-Making Method of Intelligent Vehicles: A Survey [J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 1035-1048.
[7]	YOU Guangzeng, TANG Xiangying, HU Yan, TAI Nengling, ZHU Xinchun, LI Lingfang. Flexibility Evaluation Method for Power System Based on Clustering of Typical Operating Scenarios [J]. Journal of Shanghai Jiao Tong University, 2021, 55(7): 802-813.
[8]	SU Yimin (苏奕敏), WANG Lin∗ (王琳). Integrated Framework for Test and Evaluation of Autonomous Vehicles [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(5): 699-712.
[9]	ZHENG Yikai, FAN Yunfeng, ZHANG Sipei, ZHU Ying, WU Kai. Effectiveness Analysis of Surface-to-Air Missile System Based on Improved Grey Evaluation Model [J]. Air & Space Defense, 2021, 4(2): 20-.
[10]	BU Xiaodong, ZHOU Zhichao, XU Zhensen, ZHANG Jun . Research on Combat Effectiveness Evaluation of Anti-group Target Based on Improved Information Entropy Method [J]. Air & Space Defense, 2021, 4(1): 14-18.
[11]	CAO Weiwei, LI Mingguang, WU Wei, XIA Xiaohe, SHI Yujin . Safety Evaluation Method for Long-Term Operation of Metro Based on Combination Weighting Method [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 700-705.
[12]	CHEN Xuan, LI Qi, LI Bowen, XIAO Yike, YAN Liang. Guidance Precision Fusion Evaluation Based on Multi-source Data‘s Credibility [J]. Air & Space Defense, 2020, 3(4): 14-20.
[13]	ZHANG Xingyou. Effectiveness Evaluation Method of Ship-to-air Missile Weapon System Based on Stage Characteristics of Flight Course [J]. Air & Space Defense, 2020, 3(4): 121-126.
[14]	LI Qi, LI Fan, TANG Shanjun, WANG Bingqian, ZHANG Li. Research on Anti-jamming Performance Simulation Test and Evaluation Technology of Infrared Seeker [J]. Air & Space Defense, 2020, 3(4): 127-133.
[15]	LI Fan, ZHANG Xiaowei, WANG Bingqian, GENG Xu, LI qi. Research on Similarity Evaluation for Target Simulation Model Based on Feature Analysis [J]. Air & Space Defense, 2020, 3(4): 134-140.