Research on Model Updating Method Based on Frequency Response Functions

Abstract

Abstract: This paper proposed a new model updating method based on frequency response functions which avoids the modal analysis process. This method takes the design parameters as the updating objects, moreover, it does not need matching the frequency response functions of the finite element model and the experiment and only a few measured data are needed to fulfill model updating. The model updating of a plane truss structure shows that the proposed method can get the perfect results under disturb of noise which proves the validity of the method.

Key words: model updating method, frequency response function, finite element method

CLC Number:

O 342
V 214

LI Wei-Ming, HONG Jia-Zhen. Research on Model Updating Method Based on Frequency Response Functions[J]. Journal of Shanghai Jiaotong University, 2011, 45(10): 1455-1459.

References

［1］Mottershead J E. Model updating in structural dynamics: A survey［J］. Journal of Sound and Vibration, 1993, 167 (2): 347375.

［2］Hu S L J, LI Huajun, WANG Shuqing. Crossmodel crossmode method for model updating［J］. Mechanical Systems and Signal Processing, 2007, 21:16901703.

［3］Bakir P G, Reynders E. An improved finite element model updating method by the global optimization technique ‘Coupled Local Minimizes’［J］. Computers and Structures, 2008, 86 (1112):13391352.

［4］朱凼凼, 冯咬齐. 应用位移频响函数进行模型修正［J］. 宇航学报，2006, 27(2): 201204.

ZHU Dangdang, FENG Yaoqi. Application research of finite element model improvement method by use of displacement frequency response functions［J］. Journal of Astronautics, 2006, 27(2): 201204.

［5］D’Ambrogio W, Fregolent A. Results obtained by minimising natural frequency and antiresonance errors of a beam model［J］. Mechanical Systems and Signal Processing, 2003 17(1):2937.

［6］张令弥. 动态有限元模型修正技术及其在航空航天结构中的应用［J］. 强度与环境, 2004(2):1018.

ZHANG Lingmi. Dynamic finite element model updating and its application in aerospace structures［J］. Structure & Environment Engineering, 2004(2):1018.

［7］Guyan R J. Reduction of stiffness and mass matrices［J］. AIAA J, 1965, 3(2): 380381.

［8］Berman A, Nagy E J. Improvement of a large analytical model using test data［J］. AIAA J, 1983, 21(8): 11681173.

［9］Li Weiming，Hong Jiazhen. New iterative method for model updating based on model reduction［J］. Mechanical Systems and Signal Processing, 2011,25:180192.

［10］Link M, Friswell M. Working group 1: Generation of validated structural dynamic modelsresults of a benchmark study utilising the GARTEUR SMAG19 testbed［J］. Mechanical Systems and Signal Processing, 2003, 17(1): 920.

[1]	WANG Rui, HU Zhiping, YIN Ke, MA Jiakuan, REN Xiang. Dynamic Responses Law of Subgrade of a Special Railway Line in Loess Region [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 908-918.
[2]	ZHANG Peizhen, LIN Fang. Sound Scattering Characteristics of Oxygen Cylinder for Open Breathing Diver [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 764-771.
[3]	MA Zunnong, ZHANG Yansong, ZHAO Yixi. Mechanism and Influencing Factors of Frictional Energy Dissipation in Multilayer Ultrasonic Welding [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 772-783.
[4]	TANG Genglin, LI Jianjun, LI Yuanhui, ZHANG Longyao, ZHU Wenfeng. Numerical Simulation and Experimental Research of Sheet Hemming Forming Based on Adhesive Filling [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 523-531.
[5]	LI Yuanhui, LI Jianjun, WANG Shunchao, ZHANG Longyao, ZHU Wenfeng. Modeling and Experiment on Roll-Hemming Forming Process of Aluminum Alloy Sheet with Adhesive [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 532-542.
[6]	ZHU Hanhao, XIAO Rui, ZHU Jun, TANG Jun. Propagation Characteristics of Low Frequency Sound Energy in Range-Dependent Shallow Water Waveguides [J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 958-967.
[7]	ZHANG Yu, LIU Haiting, WENG Lin, SHEN Yao. Extraction of Fracture Toughness Parameters by Ring-Notched Small Punch Specimen Using Cohesive Model [J]. Journal of Shanghai Jiao Tong University, 2021, 55(7): 850-857.
[8]	ZHAO Pengfei, XUE Xin, YANG Cheng. Simulation of Influence of End Anchorage Degradation of Stirrups Caused by Alkali Aggregate Reaction on Shear Performance of Reinforced Concrete Beams [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 681-688.
[9]	GUO Deping, LI Zheng, PENG Senlin, ZENG Zhikai, WU Daifeng. Numerical Calculation Method for Crack Dynamic Propagation Based on Newmark Implicit Time Integration Scheme [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 689-697.
[10]	ZHANG Yuan, LI Fanchun, JIA Dejun. Design and 3D Printing Simulation of a Lattice Compressor Impeller [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 729-740.
[11]	ZHOU Bo∗ (周博), KANG Zetian (康泽天), WANG Zhiyong (王志勇), XUE Shifeng (薛世峰). Nonlinear Finite Element Method Considering Martensite Plasticity for Shape Memory Alloy Structure [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 774-785.
[12]	JING Mengjie (荆梦杰), CUI Zhixin(崔志鑫), FU Hang (傅航), CHEN Xiaojun (陈晓军). Real-Time Deformation Simulation of Kidney Surgery Based on Virtual Reality [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 290-297.
[13]	ZHENG Changlong, DING Xiaohong, SHEN Hong, ZHAO Lijuan. Dynamic Topology Optimization of Rudder Structure Based on Adaptive Growth Method [J]. Air & Space Defense, 2021, 4(2): 7-.
[14]	WANG Feng, CHEN Jiali, CHEN Denghong, FAN Yong, LI Zhiyuan, HE Weiping. Element-Free Galerkin Scaled Boundary Method Based on Moving Kriging Interpolation for Steady Heat Conduction Analysis with Temperatures on Side-Faces [J]. Journal of Shanghai Jiao Tong University, 2021, 55(11): 1483-1492.
[15]	JIANG Qianqian,WANG Jiaxu,LI Junyang,XIAO Ke,TANG Ting,WANG Cheng. Influence of Double Circular Arc Harmonic Transmission Profile Parameters on Flexspline Stress [J]. Journal of Shanghai Jiaotong University, 2020, 54(2): 167-175.