[1] SMITH C S. Design of submersible pressure hulls incomposite materials [J]. Marine Structures, 1991, 4:141-182.
[2] ROSS C T F. A conceptual design of an underwatervehicle [J]. Ocean Engineering, 2006, 33: 2087-2104.
[3] OUELLETTE P, HOA S V, SANKAR T S. Buckling ofcomposite cylinders under external pressure [J]. PolymerComposites, 1986, 7(5): 363-374.
[4] MOON C J, KIM I H, CHOI B H, et al. Bucklingof filament wound composite cylinders subjected tohydrostatic pressure for underwater vehicle applications[J]. Composite Structures, 2010, 92(9): 2241-2251.
[5] MAALAWI K Y. Use of material grading for enhancedbuckling design of thin-walled composite rings/longcylinders under external pressure [J]. Composite Structures,2011, 93(2): 351-359.
[6] MESSAGE T, PYRZ M, GINESTE B, et al. Optimallaminations of thin underwater composite cylindricalvessels [J]. Composite Structures, 2002, 58(4): 529-537.
[7] LOPATIN A V, MOROZOV E V. Buckling of compositecylindrical shells with rigid end disks under hydrostaticpressure [J]. Composite Structures, 2017, 173:136-143.
[8] HU H T, CHEN H C. Buckling optimization of laminatedtruncated conical shells subjected to externalhydrostatic compression [J]. Composites Part B: Engineering,2018, 135(4): 95-109.
[9] LI Z M, QIAO P Z. Buckling and postbuckling ofanisotropic laminated cylindrical shells under combinedexternal pressure and axial compression in thermalenvironments [J]. Composite Structures, 2015,119: 709-726.
[10] CIVALEK ¨O. Buckling analysis of composite panelsand shells with different material properties by discretesingular convolution (DSC) method [J]. CompositeStructures, 2017, 161: 93-110.
[11] GEIER B, MEYER-PIENING H R, ZIMMERMANNR. On the influence of laminate stacking on bucklingof composite cylindrical shells subjected to axial compression[J]. Composite Structures, 2002, 55(4): 467-474.
[12] ROSS C T F, LITTLE A P F. The buckling of a corrugatedcarbon fibre cylinder under external hydrostaticpressure [J]. Ocean Engineering, 2001, 28(9): 1247-1264.
[13] NASIRMANESH A, MOHAMMADI S. Eigenvaluebuckling analysis of cracked functionally graded cylindricalshells in the framework of the extended finiteelement method [J]. Composite Structures, 2016, 159:548-566.
[14] DEVECI H A, AYDIN L, ARTEM H S. Buckling optimizationof composite laminates using a hybrid algorithmunder Puck failure criterion constraint [J].Journal of Reinforced Plastics and Composites, 2016,35(16): 1233-1247.
[15] LOPEZ R H, LUERSEN M A, CURSI E S. Optimizationof laminated composites considering different failurecriteria [J]. Composites Part B: Engineering, 2009,40(8): 731-740.
[16] TAFRESHI A. Delamination buckling and postbucklingin composite cylindrical shells under external pressure[J]. Thin-Walled Structures, 2004, 42: 1379-1404.
[17] TAFRESHI A. Delamination buckling and postbucklingin composite cylindrical shells under combined axialcompression and external pressure [J]. CompositeStructures, 2006, 72: 401-418.
[18] BLACHUT J. Buckling and first ply failure of compositetoroidal pressure hull [J]. Composites and Structures,2004, 82(23): 1981-1992.
[19] HUR S H, SON H J, KWEON J H, et al. Postbucklingof composite cylinders under external hydrostaticpressure [J]. Composite Structures, 2008, 86(1): 114-124.
[20] LEE G C, KWEON J H, CHOI J H. Optimization ofcomposite sandwich cylinders for underwater vehicleapplication [J]. Composite Structures, 2013, 96: 691-697.
[21] CARVELLI V, PANZERI N, POGGI C. Bucklingstrength of GFRP under-water vehicles [J]. CompositesPart B: Engineering, 2001, 32(2): 89-101.
[22] HERN′ANDEZ-MORENO H, DOUCHIN B,COLLOMBET F, et al. Influence of windingpattern on the mechanical behavior of filament woundcomposite cylinders under external pressure [J].Composites Science and Technology 2008, 68(3/4):1015-1024.
[23] NAHAS M N. Survey of failure and post-failure theoriesof laminated fiber-renforced composites [J]. Journalof Composites Technology & Research, 1986, 8(4):138-153.
[24] SATHEESH R, NAIK N G, GANGULI R. Conservativedesign optimization of laminated composite structuresusing genetic algorithms and multiple failure criteria[J]. Journal of Composite Materials, 2010, 44(3):369-387.
[25] G¨URDAL Z, HAFTKA R T, HAJELA P. Design andoptimization of laminated composite materials [M].New York. USA: John Wiley & Sons, Inc, 1999: 19-24.
[26] REDDY J N. An introduction to the finite element method [M]. New Delhi, India: McGraW-Hill, 2004.
|