[1] Su J Q, Nelson T W, Mishra R, et al. Microstructure investigation of friction stir welded 7050-T651 aluminum [J]. Acta Materialia, 2003, 51(3): 713-729.[2] Sharma C, Dwivedi D K, Kumar D. Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of AA7039 aluminum alloy [J]. Materials and Design, 2012, 36:379-390.[3] Khodaverdizadeh H, Mahmoudi A, Heidarzadeh A, et al. Effect of friction stir welding (FSW) parameters on strain hardening behavior of pure copper joints [J]. Materials and Design, 2012, 35: 330-334.[4] Palanivel R, Mathews D K, Murugan N, et al. Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys [J]. Materials and Design, 2012, 40: 7-16.[5] Jamshidi Aval H, Serajzadeh S, Kokabi A H. Thermo-mechanical and microsturcture issues in dissimilar friction stir welding of AA5086-AA6061 [J]. Journal of Materials Science, 2011, 46(10): 3258-3268.[6] Jamshidi Aval H, Serajzadeh S, Kokabi A H. Evolution of microstructures and mechanical properties in similar and dissimilar friction stir welding of AA5086 and AA6061 [J]. Materials Science and Engineering A, 2011, 528: 8071-8083.[7] Liu D, Nishio H, Nakata K. Anisotropic property of material arrangement in friction stir welding of dissimilar Mg alloys [J]. Materials and Design, 2011, 32:4818-4824.[8] Park S K, Hong S T, Park J H, et al. Effect of material locations on properties of friction stir welding joints of dissimilar aluminum alloys [J]. Science and Technology of Welding and Joining, 2010, 15: 331-336.[9] Malarvizhi S, Balasubramanian V. Influences of tool shoulder diameter to plate thickness ratio (D/T) on stir zone formation and tensile properties of friction stir welded dissimilar joints of AA6061 aluminum-AZ31B magnesium alloys [J]. Materials and Design, 2012, 40: 453-460.[10] Cao X, Jahazi M. Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy [J]. Materials and Design, 2009, 30: 2033-2042.[11] Kostka A, Coelho R S, Santos J D, et al. Microstructure of friction stir welding of aluminium alloy to magnesium alloy [J]. Scripta Materialia, 2009, 60:953-956.[12] Somasekharan A C, Murr L E. Microstructure in friction-stir welded dissimilar magnesium alloys and magnesium alloys to 6061-T6 aluminum alloy [J]. Materials Characterization, 2004, 52: 49-64.[13] Yan J C, Xu Z W, Li Z Y, et al. Microstructure characteristics and performance of dissimilar welds between magnesium alloy and aluminum formed by friction stirring [J]. Scripta Materialia, 2005, 53: 585-589.[14] Kwon Y J, Shigematsu I, Saito N. Dissimilar friction stir welding between magnesium and aluminum alloys [J]. Materials Letters, 2008; 62: 3827-3829.[15] Chang W S, Rajesh S R, Chun C K, et al. Microstructure and mechanical properties of hybrid laserfriction stir welding between AA6061-T6 Al alloy and AZ31 Mg alloy [J]. Journal of Materials Science and Technology, 2011, 27(3): 199-204.[16] Mofid M A, Abdollah-Zadeh A, Malek Ghaini F. The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloy [J]. Materials and Design, 2012, 36: 161-167.[17] Li Da, Sun Ming-hui, Cui Zhan-quan. Effect of parameters on friction stir welding joint of 7075Al and AZ31Mg [J]. Transactions of the China Welding Institution,2011, 32(8): 97-100 (in Chinese).[18] Liu H J, Zhang H J, Yu L. Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy [J].Materials and Design, 2011, 32: 1548-1553.[19] Sarkari Khorrami M, Kazeminezhad M, Kokabi A H. Microstructure evolutions after friction stir welding of severely deformed aluminum sheets [J]. Materials and Design, 2012, 40: 364-372.[20] Hao Shi-ming. Alloying of magnesium alloys and phase diagram [J]. Journal of Materials and Metallurgy, 2002, 1(3): 166-170 (in Chinese). |