Journal of Shanghai Jiao Tong University (Science) ›› 2019, Vol. 24 ›› Issue (2): 148-157.doi: 10.1007/s12204-018-1977-y
High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates
JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳)
- (Shanghai Key Laboratory of Materials Laser Processing and Modification; Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai 200240, China)
-
出版日期:2019-04-30发布日期:2019-04-01 -
通讯作者:HUA Xueming* (华学明) E-mail:xmhua@sjtu.edu.cn
High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates
JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳)
- (Shanghai Key Laboratory of Materials Laser Processing and Modification; Collaborative Innovation Center for Advanced Ship and Deep-Sea Exploration, Shanghai Jiao Tong University, Shanghai 200240, China)
-
Online:2019-04-30Published:2019-04-01 -
Contact:HUA Xueming* (华学明) E-mail:xmhua@sjtu.edu.cn
摘要： Multi-pass tandem gas metal arc welding (TGMAW) for Al 5083 alloy plates with 30mm thickness is carried out to study its high efficiency and high quality. The welding process is evaluated by high-speed photographs and electrical signals. The deposition rate and welding time are calculated to characterize the welding efficiency. The bead formation, porosity, microstructure and mechanical properties are tested and analyzed. The results indicate that though arc deflection occurs due to the electromagnetic interference between two arcs during TGMAWprocess, it does not affect the welding process stability significantly. The deposition rate and welding time of TGMAW process are about 15 g/min larger and about 16.7% less than those of gas metal arc welding (GMAW) process respectively, accompanied by the reduction of heat input. The TGMAW welded joint has less porosity and more refined microstructure to contribute to the improvement of mechanical properties (micro-hardness, tensile strength and ductility). It can be concluded that TGMAW process yields excellent performance of welded joint with improved welding efficiency, which makes it extremely practical during welding of thick plates.
中图分类号:
引用本文
JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fa. High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
使用本文
| [1] | MAKOWIECKAJA O K. Present situation and developmentaltrends in the global market of major structuralmaterials and welding technique [J]. Biuletyn InstytutuSpawalnictwa, 2015, 59(4): 32-40. |
| [2] | MIYAZAKI H, MIYAUCHI H, SUGIYAMA Y, et al.Puckering in aluminium alloy welds: Prevention usingdouble wire MIG welding [J]. Welding International,1993, 7(6): 431-437. |
| [3] | DING X P, LI H, WEI H L, et al. Numerical analysisof arc plasma behavior in double-wire GMAW [J].Vacuum, 2016, 124: 46-54. |
| [4] | YAO P, XUE J X, ZHOU K, et al. Symmetrical transitionwaveform control on double-wire MIG welding[J]. Journal of Materials Processing Technology, 2016,229: 111-120. |
| [5] | UEYAMA T, OHNAWA T, TANAKA M, et al. Occurrenceof arc interaction in tandem pulsed gas metalarc welding [J]. Science and Technology of Welding &Joining, 2007, 12(6): 523-529. |
| [6] | WU D S, HUA X M, YE D J, et al. Understanding ofthe weld pool convection in twin-wire GMAWprocess[J]. International Journal of Advanced ManufacturingTechnology, 2017, 88(1/2/3/4): 219-227. |
| [7] | WU D S, HUA X M, YE D J, et al. Understanding ofhumping formation and suppression mechanisms usingthe numerical simulation [J]. International Journal ofHeat and Mass Transfer, 2017, 104: 634-643. |
| [8] | UEYAMA T, OHNAWA T, TANAKA M, et al. Effectsof torch configuration and welding current onweld bead formation in high speed tandem pulsed gasmetal arc welding of steel sheets [J]. Science and Technologyof Welding and Joining, 2005, 10(6): 750-759. |
| [9] | YAO P, XUE J X, ZHOU K. Study on the wire feedspeed prediction of double-wire-pulsed MIG weldingbased on support vector machine regression [J]. InternationalJournal of Advanced Manufacturing Technology,2015, 79(9/10/11/12): 2107-2116. |
| [10] | MATSUMOTO T, SASABE S. Tandem MIG weldingof aluminium alloys [J]. Welding International, 2005,19(12): 945-949. |
| [11] | FANG C F, MENG X H, HU Q X, et al. TANDEMand GMAWtwin wire welding of Q690 steel used in hydraulicsupport [J]. Journal of Iron and Steel ResearchInternational, 2012, 19(5): 79-85. |
| [12] | LEE K B, KIM C, KIM D S. High deposition ratepulse gas metal arc welding for Al 5083 thick plate[J].Journal of Engineering Manufacture, 2013, 227(6):848-854. |
| [13] | UEYAMA T, OHNAWA T, YAMAZAKI K, et al.High-speed welding of steel sheets by the tandempulsed gas metal arc welding system [J]. Transactionsof JWRI, 2005, 34(1): 11-18. |
| [14] | ZHU C X, TANG X H, HE Y, et al. Characteristics andformation mechanism of sidewall pores in NG-GMAWof 5083 Al-alloy [J]. Journal of Materials ProcessingTechnology, 2016, 238: 274-283. |
| [15] | LAKSHMINARAYANAN A K, BALASUBRAMANIANV, ELANGOVAN K. Effect of welding processeson tensile properties of AA6061 aluminium alloy joints[J]. International Journal of Advanced ManufacturingTechnology, 2009, 40(3/4): 286-296. |
| [16] | DUTRA J C, E SILVA R H G, SAVI B M, et al. Metallurgicalcharacterization of the 5083H116 aluminumalloy welded with the cold metal transfer process andtwo different wire-electrodes (5183 and 5087) [J]. Weldingin the World, 2015, 59(6): 797-807. |
| [1] | SUI Da-shan*(隋大山), GAO Liang (高 亮), CUI Zhen-shan (崔振山). Microstructure Evolution of Different Forging Processes for 12%Cr Steel During Hot Deformation[J]. 上海交通大学学报（英文版）, 2015, 20(5): 606-611. |
| [2] | HUANG Qian-wei (黄芊蔚), WANG Li-ping (王莉萍), WANG Jin-ye* (王瑾晔). Mechanical Properties of Artificial Materials for Bone Repair[J]. 上海交通大学学报（英文版）, 2014, 19(6): 675-680. |
| [3] | TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永),. Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31[J]. 上海交通大学学报（英文版）, 2013, 18(2): 186-189. |
| [4] | ZHANG Chao-feng1,2* (张超锋), ZHANG Zhi-sheng2 (张志胜), AOKI Tetsuhiko3 (青木徹彦), ZHANG. Research on the Dynamic Performance of Low-Yield-Strength Shear Panel Damper for Bridge Application[J]. 上海交通大学学报（英文版）, 2013, 18(1): 118-128. |
| [5] | SUN Weia* (孙威), XIONG Xianga (熊翔), LI Xiao-binb (李小斌), LI Guo-donga (李国栋). Mechanical Properties and Residue Stress of Four Kinds of ZrC Coatings Prepared by Chemical Vapor Deposition[J]. 上海交通大学学报（英文版）, 2012, 17(6): 706-711. |
| [6] | LI Da1,2 (李达), CUI Zhan-quan2 (崔占全), YANG Qing-xiang2* (杨庆祥),SUN Bing1 (孙兵), SUN. Microstructure and Property of Friction Stir Welding Joint of 7075Al and AZ31BMg[J]. 上海交通大学学报（英文版）, 2012, 17(6): 679-683. |
| [7] | WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG. Effect of Gr Content and Hot Extrusion on Tensile Properties of (Nano-SiCp+Gr)/Cu Composites Fabricated by Powder Metallurgy[J]. 上海交通大学学报（英文版）, 2012, 17(6): 658-662. |
| [8] | ZHAO Su1* (赵素), WU Yu-juan2* (吴玉娟), HE Mei-feng3 (何美凤), ZHANG Li4 (张立). Effects of Cooling Rates on Microstructures and Mechanical Properties of Nb-Ti Microalloyed Steel[J]. 上海交通大学学报（英文版）, 2012, 17(6): 653-657. |
| [9] | LIU Li1,2* (刘礼), MA Xiao-li1 (马晓丽), ZHAO Su3 (赵素) . Microstructure and Hardness of Ni-xSi Alloys [J]. 上海交通大学学报（英文版）, 2012, 17(6): 648-652. |
| [10] | RONG Hui (荣辉), QIAN Chun-xiang (钱春香). Development of Microbe Cementitious Material in China[J]. 上海交通大学学报（英文版）, 2012, 17(3): 350-355. |
| [11] | JIANG Bin1 (姜斌), LIU Xu-he1 (刘旭贺), WU Rui-zhi1 (巫瑞智), ZHANG Mi-lin1 (张密林). Microstructures and Mechanical Properties of Various Mg-Li Wrought Alloys[J]. 上海交通大学学报（英文版）, 2012, 17(3): 297-300. |
| [12] | WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇). Improvements of Elevated Temperature Strength and Creep Resistance of Mg-12Zn-4Al Based Alloy with Calcium Addition[J]. 上海交通大学学报（英文版）, 2012, 17(3): 273-276. |
| [13] | LIU Yong1 (刘勇), SHAO Shuang1 (邵爽), XU Chun-shui1 (徐春水), LIU Ke-ming2 (刘克明). Study on the Thermal Stability of Cu-14Fe in Situ Composite without and with Trace Ag[J]. 上海交通大学学报（英文版）, 2012, 17(3): 268-272. |
| 阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
全文 126
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
摘要 578
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||