Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31

doi:10.1007/s12204-012-1295-8

摘要/Abstract

摘要： Uniaxial tensile and compressive tests were performed at room temperature on extruded AZ31 Mg alloy specimens and distinct tensile-compressive anisotropy was detected. Deformed specimens were examined and the results indicate that the generation of {10ˉ12}twin is responsible for the mechanical anisotropy. A rate independent crystal plasticity model, which accounts for both slip and twinning, was developed for polycrystalline hexagonal close packed (HCP) materials. Model predictions for the stress-strain curves and texture evolution were in reasonable agreement with the experimental results. Specifically, the model captured the three stages of strain hardening for uniaxial-compression. By comparing stress-strain curves and texture evolution between model predictions and experimental measures, information about the dominant slip and twinning systems active at room temperature was deduced.

关键词: mechanical properties, microstructure, texture, crystal plasticity, twinning

Abstract: Uniaxial tensile and compressive tests were performed at room temperature on extruded AZ31 Mg alloy specimens and distinct tensile-compressive anisotropy was detected. Deformed specimens were examined and the results indicate that the generation of {10ˉ12}twin is responsible for the mechanical anisotropy. A rate independent crystal plasticity model, which accounts for both slip and twinning, was developed for polycrystalline hexagonal close packed (HCP) materials. Model predictions for the stress-strain curves and texture evolution were in reasonable agreement with the experimental results. Specifically, the model captured the three stages of strain hardening for uniaxial-compression. By comparing stress-strain curves and texture evolution between model predictions and experimental measures, information about the dominant slip and twinning systems active at room temperature was deduced.

Key words: mechanical properties, microstructure, texture, crystal plasticity, twinning

中图分类号:

TG 146.2

TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永),. Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31[J]. 上海交通大学学报（英文版）, 2013, 18(2): 186-189.

TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永), PENG Ying-hong* (彭颖红). Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31[J]. Journal of shanghai Jiaotong University (Science), 2013, 18(2): 186-189.

参考文献

[1] Yoo M H. Slip, twinning, and fracture in hexagonal close-packed metals [J]. Metallurgical and Materials Transactions A, 1981, 12A(3): 409-418.
[2] Wang Y N, Huang J C. The role of twinning and untwinning in yielding behavior in hot-extruded Mg-Al-Zn alloy [J]. Acta Materialia, 2007, 55(3): 897-905.
[3] Brown D W, Agnew S R, Bourke M A M, et al. Internal strain and texture evolution during deformation twinning in magnesium [J]. Materials Science and Engineering A, 2005, 399(1-2): 1-12.
[4] Barnett M R, Keshavarz Z, Beer A G, et al. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn [J]. Acta Materialia, 2004, 52(17): 5093-5103.
[5] Nave M D, Barnett M R. Microstructures and textures of pure magnesium deformed in plane-strain compression [J]. Scripta Materialia, 2004, 51(9): 881-885.
[6] Kleiner S, Uggowitzer P J. Mechanical anisotropy of extruded Mg–6%Al–1%Zn alloy [J]. Materials Science and Engineering A, 2004, 379(1-2): 258-263.
[7] Chino Y, Kimura K, Hakamada M, et al. Mechanical anisotropy due to twinning in an extruded AZ31 Mg alloy [J]. Materials Science and Engineering A, 2008, 485(1-2): 311-317.
[8] Jiang L, Jonas J J, Luo A A, et al. Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy [J]. Materials Science and Engineering A, 2007, 445-446(15): 302-309.
[9] Tang W Q, Zhang S R, Peng Y H, et al. Simulation of magnesium alloy AZ31 sheet during cylindrical cup drawing with rate independent crystal plasticity finite element method [J]. Computational Materials Science, 2009, 46(2): 393-399.
[10] Wang X M, Xu B X, Yue Z F. Micromechanical modelling of the effect of plastic deformation on the mechanical behaviour in pseudoelastic shape memory alloys [J]. International Journal of Plasticity, 2008, 24(8): 1307-1332.
[11] Takahashi H. Stress-strain relations of polycrystalline metals. 3. Proportional loading of FCC metals [J]. Bulletin of the Japan Society of Mechanical Engineers, 1976, 19(136): 1115-1121.
[12] Tom′e C N, Lebensohn R A, Kocks U F. A model for texture development dominated by deformation twinning: Application to zirconium alloys [J]. Acta Metallurgica et Materialia, 1991, 39(11): 2667-2680.
[13] Koike J. Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature [J]. Metallurgical and Materials Transactions A, 2005, 36A(7): 1689-1696.
[14] Christian J W, Mahajan S. Deformation twinning [J]. Progress in Materials Science, 1995, 39(1-2): 1-157.
[15] Styczynski A, Hartig Ch, Bohlen J, et al. Cold rolling textures in AZ31 wrought magnesium alloy [J]. Scripta Materialia, 2004, 50(7): 943-947.