上海交通大学学报(英文版) ›› 2012, Vol. 17 ›› Issue (6): 658-662.doi: 10.1007/s12204-012-1341-6
WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG Lina (耿林), HUANG Yu-dongb (黄玉东)
出版日期:
2012-12-31
发布日期:
2012-12-30
通讯作者:
WANG Gui-songa,b* (王桂松)
E-mail: wangguisong@hit.edu.cn
WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG Lina (耿林), HUANG Yu-dongb (黄玉东)
Online:
2012-12-31
Published:
2012-12-30
Contact:
WANG Gui-songa,b* (王桂松)
E-mail: wangguisong@hit.edu.cn
摘要: Novel hybrid Cu matrix composites reinforced by graphite (Gr) particle with volume fraction of 5%— 15% and nano-SiC particle (nano-SiCp) with volume fraction of 3% have been prepared by powder metallurgy. The results show that Gr and nano-SiCp distribute uniformly in the Cu matrix. With increasing the volume fraction of Gr, the tensile strength of the composites decreases from 114 to 51MPa and the elastic modulus decreases from 75 to 60GPa. Compared with the sintered composites, the tensile properties including elastic modulus, tensile strength, yield strength and tensile elongation of the hot-extruded (nano-SiCp+Gr)/Cu composites are improved greatly due to higher relative density of the composites and more uniform distribution of Gr and nano-SiCp, in addition to finer grain size of the matrix as a result of dynamic recovery and recrystallization which occur during hot extrusion process.
中图分类号:
WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG. Effect of Gr Content and Hot Extrusion on Tensile Properties of (Nano-SiCp+Gr)/Cu Composites Fabricated by Powder Metallurgy[J]. 上海交通大学学报(英文版), 2012, 17(6): 658-662.
WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG Lina (耿林), HUANG Yu-dongb (黄玉东). Effect of Gr Content and Hot Extrusion on Tensile Properties of (Nano-SiCp+Gr)/Cu Composites Fabricated by Powder Metallurgy[J]. Journal of shanghai Jiaotong University (Science), 2012, 17(6): 658-662.
[1] Tjong S C, Lau K C. Abrasive wear behavior of TiB2 particle-reinforced copper matrix composites [J]. Materials Science and Engineering A, 2000, 282(1-2): 183-186. [2] Celebiefe G, Yener T, Altinsoy I, et al. The effect of sintering temperature on some properties of Cu-SiC composite [J]. Journal of Alloys and Compounds, 2011,509(20): 6036-6042. [3] Kato H,Takama M, Iwai Y, et al. Wear and mechanical properties of sintered copper-tin composites containing graphite or molybdenum disulfide [J]. Wear,2003, 255(1-6): 573-538. [4] Chandrakanth R G, Rajkumar K, Aravindan S. Fabrication of copper-TiC-graphite hybrid metal matrix composites through microwave processing [J].The International Journal of Advanced Manufacturing Technology, 2010, 48(5-8): 645-653. [5] Ramesh C S, Noor Ahmed R, Mujeebu M A, et al. Development and performance analysis of novel cast copper-SiC-Gr hybrid composites [J]. Materials and Design, 2009, 30(6): 1957-1965. [6] Riaz Ahamed A, Asokan P, Aravindan S. EDM of hybrid Al-SiCp-B4Cp and Al-SiCp-Glassp MMCs [J].The International Journal of Advanced Manufacturing Technology, 2009, 44(5-6): 520-528. [7] Cho K H, Hong U S, Lee K S, et al. Tribological properties and electrical signal transmission of coppergraphite composites [J]. Tribology Letters, 2007, 27(3):301-306. [8] Zhan Y Z, Zhang G D. Friction and wear behavior of copper matrix composites reinforced with SiC and graphite particles [J]. Tribology Letters, 2004, 17(1):91-98. [9] Uecker A. Lead-free carbon brushes for automotive starters [J]. Wear, 2003, 255: 1286-1290. [10] Kestursatya M, Kim J K, Rohatgi P K. Wear performance of copper-graphite composite and a leaded copper alloy [J]. Materials Science and Engineering A,2003, 339(1-2): 150-158. [11] Moustafa S F, El-Badry S A, Sanad A M, et al. Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders [J].Wear, 2002, 253: 699-710. [12] Zhao H J, Liu L, Wu Y T, et al. Investigation on wear and corrosion behavior of Cu-graphite composites prepared by electroforming [J]. Composites Science and Technology, 2007, 67(6): 1210-1217. [13] Chen B M, Bi Q L, Yang J, et al. Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites [J]. Tribology International, 2008, 41(12): 1145-1152. [14] Fang X F, Dahl W. Strain hardening of steels at large strain deformation. Part I. Relationship between strain hardening and microstructures of b.c.c steels [J].Materials Science and Engineering A, 1995, 203(1-2):14-25. [15] Yoshida F, Uemori T. A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation [J]. International Journal of Plasticity, 2002, 18(5-6): 661-686. [16] Corbin S F, Wilkinson D S, Embury J D. The Bauschinger effect in a particulate reinforced Al alloy [J]. Materials Science and Engineering A, 1996, 207(1-2): 1-11. |
[1] | JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fa. High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157. |
[2] | CUI Chengwen (崔成文), CHEN Yuting (陈禹廷), ZHANG Yong* (张勇). Effect of Electron Beam Irradiation on Thermal and Mechanical Properties of Polyamide Copolymer/Multiwall Carbon Nanotube Composites [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(1): 12-18. |
[3] | SUI Da-shan*(隋大山), GAO Liang (高 亮), CUI Zhen-shan (崔振山). Microstructure Evolution of Different Forging Processes for 12%Cr Steel During Hot Deformation[J]. 上海交通大学学报(英文版), 2015, 20(5): 606-611. |
[4] | LI Pan-pan1 (李盼盼), MEN Chuan-ling1* (门传玲), LI Zhen-peng1 (李振鹏),CAO Min1 (曹敏), AN. Study of Graphene Doped Zinc Oxide Nanocomposite as Transparent Conducting Oxide Electrodes for Solar Cell Applications[J]. 上海交通大学学报(英文版), 2014, 19(3): 378-384. |
[5] | TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永),. Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31[J]. 上海交通大学学报(英文版), 2013, 18(2): 186-189. |
[6] | SUN Weia* (孙威), XIONG Xianga (熊翔), LI Xiao-binb (李小斌), LI Guo-donga (李国栋). Mechanical Properties and Residue Stress of Four Kinds of ZrC Coatings Prepared by Chemical Vapor Deposition[J]. 上海交通大学学报(英文版), 2012, 17(6): 706-711. |
[7] | LI Da1,2 (李达), CUI Zhan-quan2 (崔占全), YANG Qing-xiang2* (杨庆祥),SUN Bing1 (孙兵), SUN. Microstructure and Property of Friction Stir Welding Joint of 7075Al and AZ31BMg[J]. 上海交通大学学报(英文版), 2012, 17(6): 679-683. |
[8] | ZHAO Su1* (赵素), WU Yu-juan2* (吴玉娟), HE Mei-feng3 (何美凤), ZHANG Li4 (张立). Effects of Cooling Rates on Microstructures and Mechanical Properties of Nb-Ti Microalloyed Steel[J]. 上海交通大学学报(英文版), 2012, 17(6): 653-657. |
[9] | LIU Li1,2* (刘礼), MA Xiao-li1 (马晓丽), ZHAO Su3 (赵素) . Microstructure and Hardness of Ni-xSi Alloys [J]. 上海交通大学学报(英文版), 2012, 17(6): 648-652. |
[10] | RONG Hui (荣辉), QIAN Chun-xiang (钱春香). Development of Microbe Cementitious Material in China[J]. 上海交通大学学报(英文版), 2012, 17(3): 350-355. |
[11] | JIANG Bin1 (姜斌), LIU Xu-he1 (刘旭贺), WU Rui-zhi1 (巫瑞智), ZHANG Mi-lin1 (张密林). Microstructures and Mechanical Properties of Various Mg-Li Wrought Alloys[J]. 上海交通大学学报(英文版), 2012, 17(3): 297-300. |
[12] | WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇). Improvements of Elevated Temperature Strength and Creep Resistance of Mg-12Zn-4Al Based Alloy with Calcium Addition[J]. 上海交通大学学报(英文版), 2012, 17(3): 273-276. |
[13] | LIU Yong1 (刘勇), SHAO Shuang1 (邵爽), XU Chun-shui1 (徐春水), LIU Ke-ming2 (刘克明). Study on the Thermal Stability of Cu-14Fe in Situ Composite without and with Trace Ag[J]. 上海交通大学学报(英文版), 2012, 17(3): 268-272. |
[14] | YU Song-lin (余松林), HAN Bao-san (韩宝三), CUI Long (崔 龙), DONG Ya-dong (. Preliminary Characteristic of Alginate, Heparin-Chitosan-Alginate, Heparin Microencapsulated Hepatocytes System[J]. 上海交通大学学报(英文版), 2012, 17(1): 121-128. |
[15] | HUANG Zhen (黄 真), ZHOU Dai (周 岱), REN Qiu-shi (任秋实). Biomechanical Properties and Modeling of Skin with Laser Influence[J]. 上海交通大学学报(英文版), 2011, 16(5): 610-613. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 368
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 1891
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||