Discussion on Localization of DCS Components in Nuclear Power Plant

doi:10.16183/j.cnki.jsjtu.2019.S1.005

Abstract

Abstract: The localization of digital control system (DCS) in nuclear power plant is an important part of nuclear power independence strategy. In order to further improve its localization level, the localization substitution of components in the development process of DCS equipment is preliminarily studied. And the current situation of domestic components is analyzed. The difficulties faced in the localization of DCS components in nuclear power plants are summarized, such as the lack of component categories, high cost of quality control and lack of information. Based on the experience of components localization in the field of weapon equipment and aerospace, the general methods of component replacements are summarized. Then according to the NB/T 2001 standard, the automotive-grade components are proposed to use as an alternative solution. By implementing the strategy of grading screening, the balance between quality and cost can be realized. At last, it is proposed to strengthen the cooperation between research and application, which can provide a feasible scheme for the localization of components in DCS of nuclear power plant.

Key words: nuclear power plant; digital control system (DCS); electronic component; localization

CLC Number:

TL 362

WANG Shun,LIU Mingxing,LIU Bin,WANG Song,HUANG Qi. Discussion on Localization of DCS Components in Nuclear Power Plant[J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 24-28.

References

［1］周浩, 陈立翔, 李吉浩. 国产化微波元器件应用验证的方法及应用［J］. 现代雷达, 2012, 34(1): 58-59. ZHOU Hao, CHEN Lixiang, LI Jihao. Microwave component localization validation method and its application ［J］. Modern Radar, 2012, 34(1): 58-59. ［2］李永梅, 李先亚, 周传祥. 军用进口电子元器件的国产化替代验证典型案例分析［J］. 质量与可靠性, 2017(5): 30-33. LI Yongmei, LI Xianya, ZHOU Chuanxiang. Verification and typical case analysis of domestic substitution of military imported electronic components［J］. Quality and Reliability, 2017(5): 30-33. ［3］李延杰, 陈波, 申永青, 等. 基于数据分析的军用元器件选用控制体系研究［J］. 舰船电子工程, 2019, 39(5): 16-18. LI Yanjie, CHEN Bo, SHEN Yongqing, et al. Exploration of military component selection control system based on data analysis［J］. Ship Electronic Engineering, 2019, 39(5): 16-18. ［4］马权, 罗琦, 宋小明, 等. 核电厂安全级高可靠主控制器设计技术研究［J］. 核动力工程, 2019, 40(3): 81-86. MA Quan, LUO Qi, SONG Xiaoming, et al. Design technology for highly reliable main controller of security level in nuclear power plants［J］. Nuclear Power Engineering, 2019, 40(3): 81-86. ［5］国家能源局．核电厂安全级仪表和控制设备电子元器件老化筛选和降额使用规定: NB/T 20019—2010［S］.北京: 原子能出版社. 2010. National Energy Administration. Ageing, screening, and derating rules of electronic elements and devices in safety class instrument and control equipment of nuclear power plants: NB/T 20019—2010［S］. Beijing: Atomic Energy Press, 2010. ［6］白涛, 金成日, 张春雷. 核电厂仪控设备研制中元器件筛选问题的讨论［J］. 自动化博览, 2013(4): 83-87. BAI Tao, JIN Chengri, ZHANG Chunlei. Discussion on necessity and effectiveness of components screening in the process of nuclear power plant I & C system development［J］. Automation Panorama, 2013(4): 83-87. ［7］毕锦栋, 郑丽香, 周军连, 等. 电子元器件国产化替代工作探讨［J］. 质量与可靠性, 2015(3): 35-40. BI Jindong, ZHENG Lixiang, ZHOU Junlian, et al. Discussion on localization and substitution of electronic components［J］. Quality and Reliability, 2015(3): 35-40. ［8］李智, 侯铁忠. 浅谈汽车级电子元器件装备应用的可靠性［J］. 电子世界, 2018(17): 23-25. LI Zhi, HOU Tiezhong. The reliability of automotive-grade electronics in equipment application［J］. Electronics World, 2018(17): 23-25. ［9］陈杰, 李亮, 范瑾, 等. 核电厂仪控设备电子元器件质量控制［J］. 核电子学与探测技术, 2015, 35(8): 770-774. CHEN Jie, LI Liang, FAN Jin, et al. Quality control of electronic components in nuclear power plant instrumentation and control equipment［J］. Nuclear Electronics & Detection Technology, 2015, 35(8): 770-774.

[1]	ZHOU Mao,LIU Mingming,LIU Quandong,LIU Guanrong,LI Yutong,YANG Wei. Modification of Human Body Size in Human Factor Analysis of Main Control Room of Nuclear Power Plant [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 17-23.
[2]	LIU Mingming，GAO Nan，LIU Quandong，JIN Xinglian，ZHANG Xu，CHEN Zhao. Application and Exploration of Virtual Reality Technology in Main Control Room Design of Nuclear Power Plant [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 29-32.
[3]	CHEN Jianwen,GONG Chengjun. Analysis and Treatment of Fault for Rod Position System [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 33-44.
[4]	LIU Yan，LEI Chuan，GUO Meng. Relay Board Jump of Reactor Protection System in One Nuclear Power Plant [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 45-50.
[5]	XU Shihao,JIANG Jing,XIE Weibo,CHEN Zhao,LIU Mingming. Scheme of Digital Reactor Protection System out of Service and in Service [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 51-54.
[6]	ZHANG Ying，CHEN Zhi，LI Yiliang，JIN Yuan. Optimization Design for Reactor Power Control System of HPR1000 [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 55-60.