Smoothing Transfer for the Corner of Adjacent NC Processing Segment

Abstract

Abstract:

In order to realize smooth transfers along a continuous segment trajectory, adjustable form of the cubic spline connecting curve was made for corner transition. The movement speed remains unchanged during the process of corner transition, changing the form adjustment coefficient of the spline connecting curve to adjust its curvature radius and controlling the value of acceleration. The results show that this method of adjustable form of the cubic spline connecting curve control corner transition can guarantee the smoothness of the path and the continuity of the speed and improve the machining efficiency, and reduce the acceleration mutations effectively, lessen the impact to machine tool.

Key words: smooth transition, spline curve, curvature radius, acceleration

CLC Number:

TH 161.6

HUANG Jian,SONG Aiping,TAO Jianming,YIN Weizhong. Smoothing Transfer for the Corner of Adjacent NC Processing Segment[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 734-739.

References

［1］郭锐锋, 石振振, 李培楠, 等．数控连续加工中轨迹段间平滑转接方法的研究［J］．组合机床与自动化加工技术, 2010 (5): 1317.

GUO Ruifeng, SHI Zhenzhen, LI Peinai, et al．Study on the method of smoothing transfer for segment trajectory during CNC continuous machining ［J］．Modular Machine Tool and Automatic Manufacturing Technique, 2010 (5): 1317.

［2］Hu Jun, Xiao Lingjian, Wang Yuhan, et al. An optimal feedrate model and solution algorithm for a highspeed machine of small line blocks with 1ookahead ［J］. International Journal of Advanced Manufacturing Technology, 2006, 28 (9): 930935.

［3］王琦魁, 陈友东, 李伟, 等. 基于PH曲线的数控拐角过渡方法［J］. 航空学报, 2010, 31 (7): 14811496.

WANG Qikui, CHEN Youdong, LI Wei, et al. Corner smoothing using PH curve for CNC system ［J］. Acta Aeronautica Et Astronautica Sinica, 2010, 31 (7): 14811496.

［4］杨开明, 石川, 叶佩青, 等．数控系统轨迹段光滑转接控制算法［J］. 清华大学学报：自然科学版，2007, 47 (8): 12951299.

YANG Kaiming, SHI Chuan, YE Peiqing, et al. Smooth transfer control algorithm for continuous segment trajectory in computer numerical control systems ［J］. Journal of Tsinghua University：Science and Technology, 2007, 47 (8): 12951299.

［5］何波, 罗磊. 高速数控加工轨迹拐角的速度平滑方法［J］. 上海交通大学学报, 2008, 42 (1): 8386.

HE Bo, LUO Lei. Smoothing algorithm for high speed machining at corner ［J］. Journal of Shanghai Jiaotong University, 2008, 42 (1): 8386.

［6］施群, 游清宁, 黄宇亮, 等．高速高精度曲线重构与递推插补研究［J］. 机械工程学报, 2010, 46 (3): 193198.

SHI Qun, YOU Qingning, HUANG Yuliang, et al. Research on reconstruction and recursion interpolation of curve with highspeed and highprecision ［J］. Journal of Mechanical Engineering, 2010, 46 (3): 193198.

［7］Farouki R T, Shah S. Realtime CNC interpolators for pythagorean hodograph curves ［J］. Computer Aided Geometric Design, 1996, 13 (7): 583600.

［8］张得礼, 周来水．数控加工运动的平滑处理［J］．航空学报，2006, 27 (1): 125130.

ZHANG Deli, ZHOU Laishui. Adaptive algorithm for feedrate smoothing of high speed machining ［J］. Acta Aeronautica Et Astronautica Sinica, 2006, 27 (1): 125130.

［9］Erkorkmaz K, Altintas Y. High speed CNC system design: PartⅠ. Jerk limited trajectory generation and quintic spline interpolation ［J］. International Journal of Machine Tools and Manufacture, 2001, 41(9): 13231345.

[1]	LOU Jiahui, HUANG Wentao, YANG Huanhong, YU Moduo, YANG Yayu. Operation Trajectory Planning and Path Power Optimization Control of Electric Quay Crane in Ports [J]. Journal of Shanghai Jiao Tong University, 2026, 60(2): 300-310.
[2]	LI Wenwei, CAO Shuai, QIAN Qian, ZHANG Yaling, CHEN Nan. Integrated Cam Contour Optimization Method Considering Kinematic and Dynamic Characteristics: A Paradigm of Offset Press Open-Close Gripper Mechanism [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(6): 1195-1207.
[3]	ZHAO Ziyu, WANG Xuquan, MA Jie, XING Yujie, DUN Xiong, WANG Zhanshan, CHENG Xinbin. Edge Chip Deployment Methods for Lightweight Infrared Computational Imaging Reconstruction Algorithms [J]. Air & Space Defense, 2025, 8(4): 85-93.
[4]	XU Aijin. Analysis of Wave Slamming Impact on the Launching of Underwater Data Cabin [J]. Ocean Engineering Equipment and Technology, 2024, 11(4): 89-94.
[5]	WANG Xu, CAI Yuanli, ZHANG Xuecheng, ZHANG Rongliang, HAN Chenglong. Intercept Guidance Law with a Low Acceleration Ratio Based on Hierarchical Reinforcement Learning [J]. Air & Space Defense, 2024, 7(1): 40-47.
[6]	LI Zeyao, ZHOU Jie, TIAN Wanjun, PEI Wansheng. Accumulative Plastic Deformation of Saturated Soft Clay Under Variable Frequency Cyclic Loading for Subway [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 454-463.
[7]	CHEN Min,SHENG Zhengming. How High Energy Can Humans Accelerate Particles? [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 116-117.
[8]	ZHANG Runduo, NIE Weirong, QIU Weixiang. Microfluidic Inertial Switch Capable of Bidirectional Anti-High Overload [J]. Journal of Shanghai Jiao Tong University, 2021, 55(7): 826-833.
[9]	LUO Huimiao (罗晖淼), ZHAO Dongbiao∗ (赵东标), FU Wenqiang (付文强). Speed Planning Algorithm Based on Improved S-Type Acceleration and Deceleration Model [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 786-793.
[10]	XIONG Xuejiao, JIA Zhihai, DENG Yong, FEI Yuanyuan. Motion Characteristics of Vibrated Droplets on Micropillared Surface with Gradient Energy [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 455-461.
[11]	LIU Xiaoyang, XU Weili, CHEN Jiming, XU Peiran, ZHOU Xiangxiang. A Self-Adaptive Modified Angle Filtering Algorithm Based on Passive Tracking Environment [J]. Air & Space Defense, 2021, 4(2): 48-53.
[12]	GUO Huiyong，HUANG Qi. Time-Domain Nonlinear Damage Detection Based on GARCH Effect and Improved Penalty Index [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1326-1334.
[13]	CHEN Weiye,ZOU Tianxia,TANG Ding,GUO Feipeng,LI Dayong. Aluminum Foil Forming Limitation Test and Numerical Simulation [J]. Journal of Shanghai Jiao Tong University, 2018, 52(9): 1081-1085.
[14]	YIN Yaobao,WANG Yu. Zero Deviation Characterization of Jet Pipe Servo Valve in ThreeDimensional Centrifugal Environment [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 984-991.
[15]	MI Baigang,ZHAN Hao. New Calculation Methods for Dynamic Derivatives of Advanced Flight Vehicles [J]. Journal of Shanghai Jiaotong University, 2016, 50(04): 619-624.