Method of Parameter Matching for Hydraulic Hybrid System for Excavators

Abstract

Abstract:

Based on the driving structure, working principle and working condition of a parallel hydraulic hybrid system in an excavator, the parameter design and matching were studied. Considering the installation, service life and the stableness of the engine, a method how to set the working pressure of the hydraulic accumulator was proposed. Then, to show the hybrid system’s greatest advantage at its working area and reduce the power of the enegine and the pump/motor, the parameter design of engine power and pump/motor displacement were studied. The matching results were analyzed using the built hydraulic hybrid excavator model based on AMEsim software. The results show that it can improve the distribution of engine’s working points and restrain the pressure of the hydraulic accumulator without sacrificing the stability of the engine. The energy saving of the hybrid system is at around 11.21%. The working pressure and rated volume of accumulator in different energysaving system are brought forward.

Key words: excavator, hydraulic hybrid power, accumulator, energy-saving

CLC Number:

TH 137

LIN Tianliang1,2,LIU Qiang1. Method of Parameter Matching for Hydraulic Hybrid System for Excavators[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 728-733.

References

［1］Kagoshima M， Komiyama M， Nanjo T, et al. Development of new hybrid excavator ［J］. Kobelco Technology Review, 2007, 27:3942.

［2］王庆丰,张彦廷,肖清.混合动力工程机械节能效果评价及液压系统节能的仿真研究［J］.机械工程学报, 2005, 41 (12): 135140.

WANG Qingfeng, ZHANG Yanting, XIAO Qing. Evaluation for energy saving effect and simulation research on energy saving of hydraulic system in hybrid construction machinery ［J］. Chinese Journal of Mechanical Engineering, 2005, 41 (12): 135140.

［3］LIN Tianliang, WANG Qingfeng, HU Baozan, et al. Development of hybrid powered hydraulic construction machinery ［J］. Automation in Construction, 2010, 19 (1): 1119.

［4］黄援军, 殷承良, 张建武. 并联式混合动力城市客车最优转矩分配策略［J］. 上海交通大学学报，2009, 43（13）：15361540.

HUANG Yuanjun, YIN Chengliang, ZHANG Jianwu. Optimal torque distribution control strategy for paralle hybrid electric urban buses ［J］. Journal of Shanghai Jiaotong University, 2009, 43 (13): 15361540.

［5］Xiao Q, Wang Q F, Zhang Y T. Control strategies of power system in hybrid hydraulic excavator ［J］. Automation in Construction, 2008, 17 (4): 361367.

［6］Wang D Y, Guan C, Pan S X, et al. Performance analysis of hydraulic excavator power train hybridization ［J］. Automation in Construction, 2009, 18 (3): 249257.

［7］林潇，管成，潘双夏, 等. 并联式混合动力液压挖掘机参数匹配方法［J］. 农业机械学报，2009，40（6）：28321.

LIN Xiao, GUAN Cheng, PAN Shuangxia, et al. Parameters matching method for parallel hybrid hydraulic excavators ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40 (6): 28321.

［8］王冬云，管成，潘双夏，等．液压挖掘机功率匹配与动力源优化综合控制策略［J］．农业机械学报，2009，40 (4)：9195．

WANG Dongyun, GUAN Cheng, PAN Shuangxia, et al. Control strategy of power matching and power sources optimization for hydraulic excavators ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2009, 40 (4): 9195．

［9］肖清，王庆丰. 混合动力液压挖掘机动力系统的参数匹配研究［J］. 中国公路学报, 2008, 21 (1): 121126.

XIAO Qing, WANG Qingfeng. Research on parameter matching for power system of hybrid hydraulic excavator ［J］. China Journal of Highway and Transport, 2008, 21 (1): 121126.

［10］赵丁选，陈明东，戴群亮, 等. 油液混合动力液压挖掘机动臂势能回收系统［J］. 吉林大学学报，2011，41(S1): 150154.

ZHAO Dingxuan, CHEN Mingdong, DAI Qunliang, et al. System of arm potential eneergy recovery in hybrid hydraulic excavator ［J］. Journal of Jilin University, 2011，41(S1)：150154.

[1]	LIU Chun-guang, ZHGANG Shu-sen, ZHOU Dong-rong, ZHAO Min, WANG Xu-yang, GE Tong. Recent Developments of Submarine Mechanical Trenchers in Abroad [J]. Ocean Engineering Equipment and Technology, 2019, 6(2): 517-523.
[2]	ZHANG Peng-fei. Simulation and Analysis of Low-Pressure Charging and Gate Valve Operation of Deepwater Subsea Hydraulic System Based on SimulationX [J]. Ocean Engineering Equipment and Technology, 2018, 5(2): 113-120.
[3]	WANG Xin, ZUO Xin, YANG Qing-qing, MA Tian-ran, YE Tian-yuan, WANG Ting. Research on the Interruptions among Subsea Hydraulic Actuators in the Opening Process [J]. Ocean Engineering Equipment and Technology, 2016, 3(6): 350-355.
[4]	MI Jin-hua1 (米金华), LI Yan-feng1* (李彦锋), HUANG Hong-zhong1 (黄洪钟),LI Ai-feng2 (李爱峰), WANG Xiao-ming2 (王晓明). Reliability Analysis of Excavator Rectifier Feedback System with Multi-State Components Based on Belief Universal Generating Function Method [J]. Journal of shanghai Jiaotong University (Science), 2015, 20(3): 344-348.
[5]	WANG Fang 1 (王芳), WEI Zhe2 (魏哲). Energy-Saving Reputation Method for Wireless Sensor Networks [J]. Journal of shanghai Jiaotong University (Science), 2012, 17(2): 223-227.
[6]	LIU Ye-Bao, SU Yu-Min, SHEN Hai-Long, JU Lei. Study on EnergySaving Rudder Bulb Fin Combination Based on Surface Panel Method [J]. Journal of Shanghai Jiaotong University, 2012, 46(03): 374-378.