Journal of Shanghai Jiaotong University ›› 2016, Vol. 50 ›› Issue (02): 235-240.
Previous Articles Next Articles
WANG Menghan,LI Yanzhao,LIU Xiao,XIA Zhizi,CHEN Mingliang
Received:
2014-11-11
Online:
2016-02-29
Published:
2016-02-29
CLC Number:
WANG Menghan,LI Yanzhao,LIU Xiao,XIA Zhizi,CHEN Mingliang. Effect of Process Parameters on Shrinkage and WarPage of Rapid Heat Cycle Molding Plastic Part[J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 235-240.
[1]YAO D G, KIM B. Development of rapid heating and cooling systems for injection molding application[J]. Polymer Engineering and Science, 2003, 42(12): 24712481. [2]CHEN S C, JONG W R, CHANG J A. Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line [J]. Journal of Applied Polymer Science, 2003, 101: 11741180. [3]WANG X X, ZHAO G Q, WANG G L. Research on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process[J]. Materials and Design, 2013, 47(2): 779792. [4]CHEN M, YAO D G, KIM B. Eliminating flow induced birefringence and minimizing thermally induced residual stresses in injection molded parts[J]. PolymerPlastics Technology and Engineering, 2001, 40(4): 491503. [5]刘东雷, 申长雨, 刘春太, 等. 工艺参数对高光注射成型制品翘曲的宏观影响[J]. 吉林大学学报(工学版), 2012, 42(3): 665671. LIU Donglei, SHEN Changyu, LIU Chuntai, et al. Macroeffect of process parameter on warpage of rapid heat cycle molding plastic part[J]. Journal of Jilin University(Engineering and Technology Edition), 2012, 42(3): 665671. [6]刘东雷, 申长雨, 刘春太, 等. 基于响应曲面法与改进遗传算法的RHCM成型工艺优化[J]. 机械工程学报, 2011, 47(14): 5461. LIU Donglei, SHEN Changyu, LIU Chuntai, et al. Efficient process parameters optimization of rapid heat cycling molding technology based on response surface methodology and improved genetic algorithm[J]. Journal of Mechanical Engineering, 2011, 47(14): 5461. [7]ERZURUMLU T, OZCELIK B. Minimization of warpage and sink index in injectionmolded thermoplastic parts using Taguchi optimization method[J]. Materials and Design, 2006, 27(10): 853861. [8]OZCELIK B, SONAT I. Warpage and structural analysis of thin shell plastic in the plastic injection molding[J]. Materials and Design, 2009, 30(2): 367375. [9]MATHIVANAN D, NOUBY M, VIDHYA R. Minimization of sink mark defects in injection molding process Taguchi approach[J]. International Journal of Engineering, Science and Technology, 2010, 2(2): 1322. |
[1] | WANG Peng, LI Yanting, ZHANG Yu. Probabilistic Forecasting of Wind Power Generation Using Online LASSO VAR and EGARCH Model [J]. Journal of Shanghai Jiao Tong University, 2023, 57(7): 845-858. |
[2] | DUAN Jizhong, QIAN Qingqing. Fast Parallel Imaging Reconstruction Method Based on SIDWT and Iterative Self-Consistency [J]. Journal of Shanghai Jiao Tong University, 2023, 57(5): 582-592. |
[3] | YOU Shuman, LI Jie, ZHAO Yixi, HU Yihui. Process Parameters of Flexible Flanging [J]. Journal of Shanghai Jiao Tong University, 2021, 55(10): 1246-1254. |
[4] | CHEN Pan, XIANG Rui, WEI Xiaoqi, WEI Changfu, WANG Jili. Equation for Soil Shrinkage Curve of Clay Considering Soil-Water Adsorption Effect [J]. Journal of Shanghai Jiaotong University, 2020, 54(8): 866-872. |
[5] | FENG Qiaobo,LI Yongbing,LOU Ming1,LAI Xinmin. Performance of Resistance Spot Welding Joints for AISI 430 Ferritic Stainless Steel [J]. Journal of Shanghai Jiao Tong University, 2018, 52(12): 1649-1654. |
[6] | ?SHU Yunyi,PENG Linfa,YI Peiyun,LAI Xinmin. RolltoRoll Powder Hot Embossing Process for Fabrication of MicroStructures on Polymer Film [J]. Journal of Shanghai Jiao Tong University, 2017, 51(9): 1083-1089. |
[7] |
HE Xiongjun1,ZHANG Jing1,HE Jia2,XIAO Xiang1,WANG Jingjun3,DONG Jie1.
Effects of Welding Process Parameters for Welding Residual Stress of Anchor Pipe [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 1018-1024. |
[8] | HE Ye1,2* (何也), FU Xuehai1 (傅雪海), LIU Aihua3 (刘爱华). Experimental Simulation on Dynamic Variation of the Permeability of High-Rank Coal Reservoirs [J]. Journal of Shanghai Jiao Tong University (Science), 2017, 22(6): 726-732. |
[9] | BAI Caijuan1,LIU Jing1,JIANG Xiaoyu2,ZHANG Guoxian1,HUANG Kaiyu1. The Reconstruction of Digital Holography Based on Iterative De-Noising Shrinkage-Thresholding Algorithm [J]. Journal of Shanghai Jiao Tong University, 2017, 51(12): 1435-1442. |
[10] | LIU Changhuia,JIN Suna,LAI Xinmina,LI Feib. Molding and Optimization of Injection Conditions on Shrinkage for Thin-Walled Wax Part Using RSM-GA Method [J]. Journal of Shanghai Jiaotong University, 2015, 49(09): 1380-1386. |
[11] |
JIANG Shizheng,XU Rong,CHEN Qimei.
Complex Network Short-Term Traffic Forecasting Based on Lasso-NN Model [J]. Journal of Shanghai Jiaotong University, 2015, 49(02): 281-286. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 202
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract |
|
|||||||||||||||||||||||||||||||||||||||||||||||||