Loading Measurement Method for Residual Stresses of InjectionMolded Part

Abstract

Abstract: Abstract： Based on the principle of linear superposition, a nondestructive measurement for residual stresses, i.e. the loading measurement method for residual stresses was proposed. In a certain way, it applies loads on the injectionmolded part, measures the strain on the surface measuring points, and calculates the loading stresses and residual stresses on the measuring points of the injectionmolded part. The results show that the loading measurement method has advantages over the hole drilling method and the layer removal method because it has a comparatively lower measuring cost, and it is precise when the loading state of the measured part is under the elastic range.

Key words: Key words： injectionmolded part, residual stress, finite element method, loading measurement method

CLC Number:

TQ 347.3

LIU Hong1,JIANG Lanfang2,CHEN Xianli1. Loading Measurement Method for Residual Stresses of InjectionMolded Part [J]. Journal of Shanghai Jiaotong University, 2016, 50(02): 241-245.

References

［1］印兵胜，赵怀普，王晓洪．残余应力测定的基本知识——第七讲机械法测残余应力［J］．理化检验（物理分册），2007，43(12)：642645． YIN Bingsheng, ZHAO Huaipu, WANG Xiaohong. Basic knowledge of residual stress determination—Lecture No. 7 residual stress determination by mechanical method ［J］. Physical Testing and Chemical Analysis (Part A: Physical Testing), 2007, 43(12): 642645. ［2］伍声宝，关凯书．球压痕法评价材料拉伸性能的有限元分析［J］．压力容器, 2012, 29(9): 3338. WU Shengbao, GUAN Kaishu. Finite element analysis of determining tensile properties of materials using ball indentation technique ［J］. Pressure Vessel Technology, 2012, 29(9): 3338. ［3］卫志勇，郭应征．测试灵敏度系数的理论分析［J］．特种结构, 2008, 25(2): 101103． WEI Zhiyong, GUO Yingzheng. Theoretical analysis of test sensitivity coefficients ［J］. Special Structures, 2008, 25(2): 101103. ［4］刘忠亚，刘丹娜．利用钻孔法估算在役混凝土结构现存预应力［J］．武汉工程大学学报，2008，30(4)：6264． LIU Zhongya, LIU Danna. Drilling method to estimate existing concrete structures with prestressing ［J］. Journal of Wuhan Institute of Technology, 2008, 30(4): 6264. ［5］李昊，刘一华．钻孔法中的残余应力场.I.理论分析［J］．焊接学报，2008，29(9)：4650． LI Hao, LIU Yihuan. Residual stress field in holedrilling method.Part I. Theoretical analysis ［J］. Welding Journal, 2008, 29(9): 4650. ［6］赵冲久，邓雷飞，田双珠．钻孔法检测残余应力技术中有关参数的数值计算分析［J］．水道港口，2011，32(2)：122127． ZHAO Chongjiu, DENG Leifei, TIAN Shuangzhu. Numerical calculation on parameters of residual stresses measuring by holedrilling method ［J］. Journal of Waterway and Harbor, 2011, 32(2): 122127. ［7］陈聪．钻孔法检测残余应力的有限元分析［J］．吉首大学学报，2012，33(1)：5660． CHEN Cong. Finite element analysis of measuring residual stress by drilling hole method ［J］. Journal of Jishou University, 2012, 33(1): 5660. ［8］戴福隆，亚敏．云纹干涉与钻孔法测量残余应力的实验方法与系统［J］．实验力学，2003，18(3)：6264． DAI Fulong, YA Min. Experimental method and system for moire interferometry and drilling hole method for residual stress ［J］. Experimental Mechanics, 2003, 18(3): 6264. ［9］王小明，赵冲久，徐满意．钻孔法检测残余预应力的有限元计算［J］．港工技术，2008(1): 2629． WANG Xiaoming, ZHAO Chongjiu, XU Manyi. Finite element calculation for drilling hole method to solve residual prestress ［J］. Port Engineering Technology, 2008(1): 2629. ［10］齐红宇，刘金龙．基于云纹干涉法与钻孔法的等离子热障涂层残余应力实验［J］．航空动力学报, 2011，26(3)：617621． QI Hongyu, LIU Jinlong. Investigation on residual stress of plasma sprayed thermal barrier coatings based on moire interferometry and hole drilling method ［J］. Journal of Aerospace Power, 2011, 26(3): 617621. ［11］ASTM Standard E837—1981，Standard test method for determining residual stresses by the holedrilling strain gage method ［S］. ［12］GB/T 24179—2009，金属材料残余应力测定压痕应变法［S］．［13］UNDERWOOD D. Residualstress measurement using surface displacements around an indentation ［J］. Experimental Mechanics, 1972, 13(9): 373380. ［14］ISAYEV A I. Orientation development in the injection molding of amorphous polymers ［J］. Polymer Engineering and Science, 1983, 23(5): 271284. ［15］李海梅，申长雨，徐文莉，等．塑料制品残余应力的光弹测量和数值模拟［J］．塑料工业，2007，10(4)：1216． LI Haimei, SHEN Changyu, XU Wenli, et al. Photoelastic measurements and numerical simulation of residual stresses in plastics ［J］. Plastics Industry, 2007, 10(4): 1216. ［16］韩建, 刘春太, 杜云海, 等. 注射成型聚苯乙烯制品双折射的光弹测试与分析［J］. 中国塑料, 2008, 22(1): 8185. HAN Jian, LIU Chuntai, DU Yunhai, et al. Measurement and analysis of birefringence distribution in injection molded polystyrene parts by photoelasticity method ［J］. China Plastics, 2008, 22(1): 8185. ［17］ZOETLIEF W F, DOUVEN L F A, HOUSEZ A J I. Residual thermal stresses in injection molded products ［J］. Polymer Engineering Science, 1996, 36(14): 18861896. ［18］EKMEKCI B, EKMEKCI N, TEKKAYA A E, et al. Residual stress measurement with layer removal method ［C］∥ Proceedings of the First Cappadocia International Mechanical Engineering Symposium. Cappadocia: CMES, 2004. ［19］WANG T H, YOUNG W B. Study on residual stresses of thinwalled injection molding ［J］. European Polymer Journal, 2005, 41(10): 25112517. ［20］KIM C H, KIM S H. Measurement of residual stresses in injection molded polymeric part by applying layerremoval and incremental holedrilling methods ［J］. Fibers and Polymers, 2007, 8(4): 443446. ［21］KIM S Y, KIM C H, KIM S H, et al. Measurement of residual stresses in film insert molded parts with complex geometry ［J］. Polymer Testing, 2009, 28(5): 500507. ［22］蒋兰芳，刘红，林伟明,等.降低塑料直尺残留应力的优化分析［J］. 模具工业，2012，38(5): 1419. JIANG Lanfang, LIU Hong, LIN Weiming, et al. Optimal analysis of reducing residual stress in injection molding of plastic ruler ［J］. Mold Industry, 2012, 38(5): 1419. ［23］金祖铨, 吴念. 聚碳酸酯树脂及应用［M］. 北京：化学工业出版社, 2009.

[1]	Li Pengju, Fu Rongchang, Yang Xiaozheng, Wang Kun. Dynamic Response of Idiopathic Scoliosis and Kyphosis Spine [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(3): 482-492.
[2]	JIANG Jie, CHEN Lijun, CHAI Wencheng, AI Yonglin, OU Xiaoduo, GONG Jian. Force and Deformation Analysis of H(t)-T Loaded Pile Based on Pasternak Foundation Model [J]. Journal of Shanghai Jiao Tong University, 2025, 59(1): 60-69.
[3]	ZHAI Xumao, TIAN Xinwei, ZHANG Chuanbin, LI Yujuan, LIU Shuo, CUI Yi. Coupling Characteristics of Lubrication and Flexible Multibody Dynamics of Piston-Liner Pairs in Diesel Engines [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 324-332.
[4]	WANG Xianfeng, ZOU Fan, LIU Chang, AN Qinglong, CHEN Ming. Influence of Countersink Fillet Radius on Mechanical Performance of CFRP/Al Bolted Joints [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 342-351.
[5]	CHEN Erdong, GAO Zihang, WANG Kundong, LEI Huaming. Design of a Rapid Thermal Cycling System for Real-Time Fluorescent PCR with Zone Temperature Control [J]. Journal of Shanghai Jiao Tong University, 2023, 57(9): 1196-1202.
[6]	DING Yuejie, WANG Yiwen, WANG Wurong, WEI Xicheng, ZHAO Yangyang. Springback Control of DP1180 Steel Stamping by Variable Closing Pressure [J]. Journal of Shanghai Jiao Tong University, 2023, 57(8): 1096-1104.
[7]	HUANG Huaizhou, WANG Hailong, YUAN Yujie, HOU Tao, SHI Rui, YE Maosheng. A Simplified Calculation of Doubler Plate Reinforced Tubular T Joints [J]. Ocean Engineering Equipment and Technology, 2023, 10(4): 64-69.
[8]	ZHU Kai, (祝楷), XIONG Baiqing, ∗ (熊柏青), YAN Hongwei, (闫宏伟), ZHANG Yongan, (张永安), LI Zhihui, (李志辉), LI Xiwu, (李锡武), LIU Hongwei, (刘红伟), WEN Kai, (温凯), YAN Lizhen, (闫丽珍). Numerical Simulation on the Effect of Conveyor Velocity of the Roller Table on Stress Distribution and Evolution in Large Aluminum Alloy Thick Plates [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 255-263.
[9]	AZKA Umar ∗, JIANG Chun (姜淳), KHUSHIK Muhammad Hanif Ahmed Khan. Band Structure Characteristics of Two-Dimensional Si-A (Ge, Pb, Sn) Alloy-Air Holes Thermal Crystals [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 180-185.
[10]	WANG Qian, DING Xiaohong, ZHANG Heng. Stiffener Layout Optimization of Thin-Walled Structures Through Thick/Thin Generic Quadrilateral Shell Elements [J]. Air & Space Defense, 2023, 6(2): 55-61.
[11]	WANG Rui, HU Zhiping, YIN Ke, MA Jiakuan, REN Xiang. Dynamic Responses Law of Subgrade of a Special Railway Line in Loess Region [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 908-918.
[12]	MA Zunnong, ZHANG Yansong, ZHAO Yixi. Mechanism and Influencing Factors of Frictional Energy Dissipation in Multilayer Ultrasonic Welding [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 772-783.
[13]	ZHANG Peizhen, LIN Fang. Sound Scattering Characteristics of Oxygen Cylinder for Open Breathing Diver [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 764-771.
[14]	LI Yuanhui, LI Jianjun, WANG Shunchao, ZHANG Longyao, ZHU Wenfeng. Modeling and Experiment on Roll-Hemming Forming Process of Aluminum Alloy Sheet with Adhesive [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 532-542.
[15]	TANG Genglin, LI Jianjun, LI Yuanhui, ZHANG Longyao, ZHU Wenfeng. Numerical Simulation and Experimental Research of Sheet Hemming Forming Based on Adhesive Filling [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 523-531.