Plastic Deformation Characteristics of 20CrMnTiH Gear Steel under High Temperature

Abstract

Abstract: Taking the 20CrMnTiH gear steel as an object, under the condition of deformation temperature of 850 °C-1 150 °C and strain rate 0.01 s-1-10 s-1, different high temperature compression tests were carried out to investigate its plastic deformation characteristics. The flow stress under 850 °C is 2 to 3 times the stress under 1 150 °C, and the stress at strain rate 10 s-1 is 2 to 3 times the stress at strain rate 0.01 s-1. Under high temperature and low strain rate, the phenomenon of continuous dynamic recrystallization (CDRX) takes place. From the microstructure, the recrystallized grains along initial grain boundaries grow and new grains generate with the increase of deformation temperature, and the grains grow up significantly because of CDRX when the temperature is 1 050 °C. The hot deformation activation energy of the steel is 371.053 kJ/mol. Based on the processing map, the optimum processing parameters of hot deformation are obtained, that is, the deformation temperature is 1 020 °C-1 150 °C and the strain rate is 0.5 s-1-2.5 s-1.
Key words：

Key words: 20CrMnTiH, hot compression, deformation behavior, microstructure, processing map

CLC Number:

TG 316

HU Cheng-Liang, ZHANG Ying, ZHAO Zhen, LI Shi-Long, ZHI Yue-Sheng. Plastic Deformation Characteristics of 20CrMnTiH Gear Steel under High Temperature[J]. Journal of Shanghai Jiaotong University, 2012, 46(10): 1627-1631.

References

［1］杨卫中. 汽车用齿轮钢20CrMnTiH1的研制［J］. 大型铸锻件，2007(3): 1820.
YANG Weizhong. The development of 20CrMoTiH1 gear steel used for the automobile［J］. Heavy Castings and Forgings, 2007(3): 1820.

［2］高志新，李强，颜丙银. 电炉20CrMnTiH齿轮钢质量现状与质量控制［J］. 莱钢科技，2006(5): 912.
GAO Zhixin, LI Qiang, YAN Bingyin. Present situation of 20CrMnTiH gear steel quality and its quality control［J］. Laigang Science & Technology, 2006(5): 912.

［3］张海，姚风臣，刘德富. 冶炼过程对20CrMnTiH钢成分的控制［J］. 机械工程材料，2002, 26(7): 1113.
ZHANG Hai, YAO Fengchen, LIU Defu. Constituent control of 20CrMnTiH steel in smelting process［J］. Materials for Mechanical Engineering, 2002, 26(7): 1113.
［4］Gao X H, Qi K M, Deng T Y, et al. Application of artificial neural network to predicting hardenability of gear steel［J］. Journal of Iron and Steel Research, International, 2006, 13(6):7173.
［5］吕铭，王健，郭伟达，等. 20CrMnTi H钢顶锻裂纹分析与控制措施［J］. 中国冶金，2008, 18(2): 1921.
L Ming, WANG Jian, GUO Weida, et al. Study on upset cracks of 20CrMnTiH steel by converter smelt and measures at laiwu steel［J］. China Metallurgy, 2008, 18(2): 1921.
［6］张延玲，刘海英，阮小江，等. 中低碳齿轮钢中合金元素的偏析行为及其对带状组织的影响［J］. 北京科技大学学报，2009, 31(Sup1): 199206.
ZHANG Yanling, LIU Haiying, RUAN Xiaojiang, et al. Microsegregation behaviors of alloy elements and their effects on the formation of banded structure in pinion steels［J］. Journal of University of Science and Technology Beijing, 2009, 31(Sup1): 199206.
［7］Cai J, Hu Z M, Dean T A. Alternative die designs in netshape forging of gears［J］. Journal of Materials Processing Technology, 2004, 150(12): 4855.
［8］胡成亮，施卫兵，徐祥龙，等. 带毂直齿轮冷精锻新工艺及其数值模拟［J］. 上海交通大学学报，2009，43(9): 19941997.
HU Chengliang, SHI Weibing, XU Xianglong, et al. A novel cold precision forging process of spur gear with boss and its numerical simulation［J］. Journal of Shanghai Jiaotong University, 2009, 43(9): 19941997.
［9］Sakai T, Jonas J J. Dynamic recrystallizationmechanical and microstructural considerations［J］. Acta Metallurgica, 1984, 32(2): 189209.

[1]	WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen. Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358.
[2]	WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756.
[3]	YU Xiaokang (俞小康), YE Jia (叶佳), WU Chunxiang (吴春祥), MA Guohong∗ (马国红). Effect of Cu Addition on the Microstructure and Mechanical Properties of U-MIG Welds on Galvanized Steel Sheets [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 757-764.
[4]	TANG Jingzhao, YAN Jiawei, SHEN Yao. Effect of Silicon State on Microstructure and Properties of Al-1%Si Alloy During Severe Plastic Deformation [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 249-257.
[5]	JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
[6]	YU Qian,ZHANG Wenguang,YIN Xuele. Surface Properties of Neural Electrodes Based on Oriented Electrodeposition [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1308-1315.
[7]	LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388.
[8]	LAI Rui,CAI Yan,WU Yue,HUA Xueming. Effects of Beam Focus Position on the Duplex Stainless Steel#br# Fiber Laser Welded Joint Shape and Microstructure [J]. Journal of Shanghai Jiaotong University, 2017, 51(4): 418-.
[9]	GU Yanhong1,MA Huijuan1,GAO Hui1,CHE Juntie1,JIAO Xiangdong1,TIAN Lu1,2. Microstructure and Local Corrosion Behavior of Friction Stud Welding of 16Mn Steel [J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1348-1354.
[10]	JIN Xue,ZHU Ping,LI Han,WANG Qing. Research on Mechanical Properties of Locking Cap Lap Welds and Partitioned Seam Weld Model [J]. Journal of Shanghai Jiaotong University, 2017, 51(11): 1297-1303.
[11]	SUI Da-shan*(隋大山), GAO Liang (高亮), CUI Zhen-shan (崔振山). Microstructure Evolution of Different Forging Processes for 12%Cr Steel During Hot Deformation [J]. Journal of shanghai Jiaotong University (Science), 2015, 20(5): 606-611.
[12]	ZHU Jialei1,WANG Dianshu2,JIAO Xiangdong1,CHEN Maoxiao1. Chamber Local Dry Underwater Welding [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 329-332.
[13]	CHEN Yuxi1，LIU Liang2，ZHANG Huajun2，CHEN Huabin1，CHEN Shanben1. Effect of Heat Input on Microstructure and Toughness of Weld Joint of High-Strength LowAlloy Steel [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 306-309.
[14]	DONG Hongbo,YU Xinping,ZHANG Wei. Microstructure Simulation of Q550D Ultra Low Carbon Bainite Steel [J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 67-73.
[15]	HE Chunfeng,ZHAO Yixi,HUANG Sheng. Microstructural Study of Advanced High Strength Dual-Phase Steels Sheet Under Stretch-Bending Forming Process [J]. Journal of Shanghai Jiaotong University, 2014, 48(05): 618-623.