考虑广义时间价值的串行退化生产系统维护更新策略

doi:10.16183/j.cnki.jsjtu.2020.05.003

摘要/Abstract

摘要： 以多工序多设备组成的串行生产系统为研究对象，将设备的退化过程看作符合Gamma分布的随机过程，在每次预防性维护时引入机会维护，以减少系统的停机次数；将维护时间看作与设备退化度和维护次数有关的函数，采用退化度恢复因子描述设备维护前后退化度的演变过程；考虑广义时间价值建立设备的成本函数，依据费效比和可用度对设备的维护更新进行联合决策，建立串行生产系统的维护更新模型；算例仿真对维护阈值进行了优化决策，计算出了各设备的更新时间及维护次数.结果表明：广义时间价值会加速设备的老化，缩短设备的使用寿命，从而为企业制定生产系统维护更新策略提供了新思路.

关键词: 广义时间价值；串行生产系统；机会维护；更新策略

Abstract: A series production system consisting of multiple processes and facility was studied considering degradation process as a random process in line with Gamma distribution. Opportunistic maintenance was introduced when preventive maintenance (PM) was conducted to reduce system downtime. Maintenance time was regarded as a function of degradation degree and maintenance times. A degradation degree recovery factor was used to describe the evolution process of facility degradation degree before and after maintenance. Considering the generalized time value, cost function of facility and system model was established according to the decision of maintenance and replacement based on cost-effectiveness and availability. The numerical example optimized the maintenance thresholds and calculated the replacement time and PM times of each facility. The results show that the generalized time value can accelerate the aging of facility, shorten service life, and provide a new idea for enterprise to make maintenance and replacement policy.

Key words: generalized time value; series production system; opportunistic preventive maintenance; replacement policy

中图分类号:

TH 17

杜煜，李雨青，张秀芳，潘尔顺. 考虑广义时间价值的串行退化生产系统维护更新策略[J]. 上海交通大学学报, 2020, 54(5): 465-472.

DU Yu，LI Yuqing，ZHANG Xiufang，PAN Ershun. Preventive Maintenance and Replacement Policy for Series Deteriorating Production System Considering Generalized Time Value[J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 465-472.

参考文献

［1］余佳迪, 周炳海.带缓冲的串行生产系统预防性维护策略［J］.上海交通大学学报, 2014, 48(12): 1694-1699. YU Jiadi, ZHOU Binhai. Preventive maintenance policy for series production systems with intermediate buffers ［J］. Journal of Shanghai Jiao Tong University, 2014, 48(12): 1694-1699. ［2］陆志强, 赵婵媛, 崔维伟. 串联生产系统预防性维护计划建模与优化［J］. 哈尔滨工程大学学报, 2017, 38(2): 269-275. LU Zhiqiang ZHAO Chanyuan, CUI Weiwei. Modeling and optimization of preventive maintenance sche-duling for series production systems ［J］. Journal of Harbin Engineering University, 2017, 38(2): 269-275. ［3］陶红玉, 周炳海.基于随机退化的串行生产系统机会维护模型［J］.上海交通大学学报, 2013, 47(12): 1911-1917. TAO Hongyu, ZHOU Binghai. Opportunistic maintenance model for series production systems based on Stochastic degradation ［J］. Journal of Shanghai Jiao Tong University, 2013, 47(12): 1911-1917. ［4］侯文瑞, 蒋祖华, 金玉兰.基于可靠度的多部件系统机会维护模型［J］.系统工程与电子技术, 2008, 30(9): 1805-1808. HOU Wenrui, JIANG Zuhua, JIN Yulan. Opportu-nistic preventive maintenance model of multi-components system based on reliability ［J］. Systems Engineering and Electronics, 2008, 30(9): 1805-1808 ［5］ZHOU X, XI L, LEE J. Opportunistic preventive maintenance scheduling for a multiunit series system based on dynamic programming ［J］. International Journal of Production Economics, 2009, 118(2): 361-366. ［6］XIA T, XI L, ZHOU X, et al. Modeling and optimizing maintenance schedule for energy systems subject to degradation ［J］. Computers & Industrial Enginee-ring, 2012, 63(3): 607-614. ［7］XIA T, XI L, ZHOU X, et al. Dynamic maintenance decision making for series-parallel manufacturing system based on MAM-MTW methodology ［J］. Euro-pean Journal of Operational Research, 2012, 221(1): 231-240. ［8］XIA T, JIN X, XI L, et al. Production-driven opportunistic maintenance for batch production based on MAM-APB scheduling ［J］. European Journal of Operational Research, 2015, 240(3): 781-790. ［9］贾积身, 巴玉强, 张清叶.修理工单重定期休假可修系统更换模型研究［J］. 数学的实践与认识, 2014, 44(19): 207-215. JIA Jishen, BA Yuqiang, ZHANG Qingye. Research on replacement model for reparable system conside-ring its repairman having single regular vacations ［J］. Mathematic in Practice and Theory, 2014, 44(19): 207-215. ［10］GAO Q, YUE D, ZHAO B. The ordering and replacement policy for the system with two types of failures ［J］. Journal of Systems Science & Complexity, 2018, 31(6): 1541-1553. ［11］ZONG S, CHAI G, ZHANG Z, et al. Optimal replacement policy for a deteriorating system with increasing repair times ［J］. Applied Mathematical Modelling, 2013, 37(23): 9768-9775. ［12］WANG G, ZHANG Y. Geometric process model for a system with inspections and preventive repair ［J］. Computers & Industrial Engineering, 2014, 75: 13-19. ［13］ZHAO P, LI L. Analysis based on the shortest path method of equipment replacement ［C］//IEEE 2014 26th Chinese Control And Decision Conference, Shenyang: Control and Design, 2014: 962-965. ［14］CHANG C C. Optimum preventive maintenance policies for systems subject to random working times, replacement, and minimal repair ［J］. Computers & Industrial Engineering, 2014, 67, 185-194.

[1]	于文莉，周晓军. 考虑退化交互的多部件系统动态机会维护建模[J]. 上海交通大学学报, 2020, 54(11): 1157-1164.
[2]	苏春，赵家彬. 基于产品使用率的柔性基本质保策略优化设计[J]. 上海交通大学学报, 2020, 54(11): 1182-1188.
[3]	司国锦，夏唐斌，宋亚，奚立峰. 面向租赁服务网络广域运维的3层机会维护调度策略[J]. 上海交通大学学报（自然版）, 2019, 53(4): 387-395.
[4]	孙博文，郭闻雨，夏唐斌，潘尔顺，奚立峰. 面向串并联生产系统机会维护的产能平衡导向租赁利润优化策略[J]. 上海交通大学学报（自然版）, 2019, 53(3): 276-284.
[5]	郝虹斐1，郭伟1，桂林2，王磊1. 非完美维修情境下的预防性维修多目标决策模型[J]. 上海交通大学学报（自然版）, 2018, 52(5): 518-524.
[6]	吴军a, b，黎国强a，吴超勇a，程一伟c，邓超c. 数据驱动的滚动轴承性能衰退状态监测方法[J]. 上海交通大学学报（自然版）, 2018, 52(5): 538-544.
[7]	胡家文1，蒋祖华1，侯文瑞2，裴海燕1，王海丽1，孙小明1. 批量生产模式下考虑设备运行负荷的预防维护策略[J]. 上海交通大学学报（自然版）, 2018, 52(3): 332-339.
[8]	胡家文，蒋祖华，韩李杰. 工况时变下设备预防维护策略[J]. 上海交通大学学报（自然版）, 2016, 50(05): 736-741.
[9]	王红,杜维鑫,刘志龙,杨欣翥,李忠学. 联合故障与经济相关性的动车组多部件系统维护[J]. 上海交通大学学报（自然版）, 2016, 50(05): 660-667.
[10]	陶辛阳，夏唐斌，奚立峰. 基于健康指数的预防性维护与多目标生产调度联合优化建模[J]. 上海交通大学学报（自然版）, 2014, 48(08): 1170-1174.
[11]	王桂娜，俞秉昊，潘尔顺，杜世昌. 成组生产条件下考虑学习和遗忘效应及设备维护的调度策略[J]. 上海交通大学学报（自然版）, 2013, 47(05): 723-727.
[12]	李方溪, 陈桂明, 刘希亮, 张倩, 李胜朝. 希尔伯特-黄变换端点效应的自适应端点相位正弦延拓方法 [J]. 上海交通大学学报（自然版）, 2013, 47(04): 594-601.
[13]	陈友玲1, 张立元1, 刘文科1, 王建华2, 郭金龙1. 间接状态监测下基于维修费用及残余寿命的设备维修策略[J]. 上海交通大学学报（自然版）, 2012, 46(06): 936-942.
[14]	王桂娜, 潘尔顺. 可重构制造系统预防维护策略与EPQ整合模型[J]. 上海交通大学学报（自然版）, 2012, 46(05): 712-716.
[15]	张志峰1,2，DAVID Janet2. 基于信息熵的单元化制造系统状态度量[J]. 上海交通大学学报（自然版）, 2015, 49(01): 109-115.