冰晶颗粒的浮升融化过程

doi:10.16183/j.cnki.jsjtu.2020.05.004

上海交通大学学报 ›› 2020, Vol. 54 ›› Issue (5): 473-480.doi: 10.16183/j.cnki.jsjtu.2020.05.004

冰晶颗粒的浮升融化过程

张雨龙，张鹏，马非

上海交通大学制冷与低温工程研究所，上海 200240

发布日期:2020-06-02
通讯作者: 张鹏，男，教授，博士生导师，电话（Tel.）:021-34205505; E-mail: zhangp@sjtu.edu.cn.
作者简介:张雨龙（1994-），男，湖北省荆州市人，硕士生，研究领域为相变浆体的流动与传热传质.
基金资助:
国家自然科学基金资助项目(51676122)

Floating and Melting Process of an Ice Particle

ZHANG Yulong，ZHANG Peng，MA Fei

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China

Published:2020-06-02

摘要/Abstract

摘要： 为了更好地理解相变浆体的流动与热质传递过程，对冰晶颗粒在水中的浮升融化过程进行了数值计算研究.计算模型考虑了多种作用力下冰晶颗粒的自由浮升过程，并通过焓-多孔介质法对颗粒浮升中伴随的融化过程进行了描述.利用该模型研究了流体与颗粒的换热温差以及颗粒内部过冷对其非均匀浮升融化过程的影响，获得了颗粒浮升融化过程中的形态变化以及涉及到的流动与传热特性.计算结果表明，冰晶颗粒内部的过冷度对颗粒的融化有极大的阻碍作用.

关键词: 冰晶颗粒；过冷；自由浮升；非均匀融化

Abstract: In order to understand the flow and heat transfer characteristics of phase change slurry, the floating and melting process of an ice particle in water is numerically studied. The free-floating process of an ice particle under various forces is numerically modelled, and the melting process of solid particle is described by enthalpy-porous method. The model is implemented to study the floating and non-uniform melting process of an ice particle at different temperature variations and internal supercooling degrees. The morphological change of ice particle and the thermo-fluidic characteristics during floating and melting process are obtained. It is found that the internal supercooling degree of ice particle delays the melting of ice particle.

Key words: ice particle; supercooling; free-floating; non-uniform melting

中图分类号:

TB 61
TK 02

张雨龙，张鹏，马非. 冰晶颗粒的浮升融化过程[J]. 上海交通大学学报, 2020, 54(5): 473-480.

ZHANG Yulong，ZHANG Peng，MA Fei. Floating and Melting Process of an Ice Particle[J]. Journal of Shanghai Jiaotong University, 2020, 54(5): 473-480.

参考文献

［1］KAPSALIS V, KARAMANIS D. Solar thermal energy storage and heat pumps with phase change materials［J］. Applied Thermal Engineering, 2016, 99: 1212-1224. ［2］PIELICHOWSKA K, PIELICHOWSKI K. Phase change materials for thermal energy storage［J］. Progress in Materials Science, 2014, 65: 67-123. ［3］NKWETTA D N, HAGHIGHAT F. Thermal energy storage with phase change material-A state-of-the art review［J］. Sustainable Cities and Society, 2014, 10: 87-100. ［4］JAMEKHORSHID A, SADRAMELI S M, FARID M. A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium［J］. Renewable and Sustainable Energy Reviews, 2014, 31: 531-542. ［5］SHARMA R K, GANESAN P, TYAGI V V, et al. Developments in organic solid-liquid phase change materials and their applications in thermal energy storage［J］. Energy Conversion and Management, 2015, 95: 193-228. ［6］CHAI L, SHAUKAT R, WANG L, et al. A review on heat transfer and hydrodynamic characteristics of nano/microencapsulated phase change slurry (N/MPCS) in mini/microchannel heat sinks［J］. Applied Thermal Engineering, 2018, 135: 334-349. ［7］JURKOWSKA M, SZCZYGIE I. Review on properties of microencapsulated phase change materials slurries (mPCMS)［J］. Applied Thermal Engineering, 2016, 98: 365-373. ［8］ZHANG P, MA Z W. An overview of fundamental studies and applications of phase change material slurries to secondary loop refrigeration and air conditioning systems［J］. Renewable and Sustainable Energy Reviews, 2012, 16(7): 5021-5058. ［9］刘汉涛, 江山, 王艳华, 等. 溶解椭圆颗粒沉降的介观尺度数值模拟［J］. 物理学报, 2015, 64(11): 110471-110479. LIU Hantao, JIAN Shan, WANG Yanhua, et al. Mesoscale simulation of the sedimentation of melting elliptical particle［J］. Acta Physica Sinica, 2015, 64(11): 110471-110479. ［10］SHABGARD H, HU H, BOETTCHER P A, et al. Heat transfer analysis of PCM slurry flow between parallel plates［J］. International Journal of Heat and Mass Transfer, 2016, 99: 895-903. ［11］GAN H, FENG J J, HU H H. Simulation of the sedimentation of melting solid particles［J］. International Journal of Multiphase Flow, 2003, 29(5): 751-769. ［12］VOLLER V R, PRAKASH C. A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems［J］. International Journal of Heat and Mass Transfer, 1987, 30(8): 1709-1719. ［13］BAGHERZADEH M. Modelling single particle settlement by CFD-DEM coupling method［D］. Delft, Netherlands: Delft University of Technology, 2014. ［14］CHANG T J, YEN B C. Gravitational fall velocity of sphere in viscous fluid［J］. Journal of Engineering Mechanics, 1998, 124(11): 1193-1199. ［15］TEN CATE A, NIEUWSTAD C H, DERKSEN J J, et al. Particle imaging velocimetry experiments and lattice-Boltzmann simulations on a single sphere settling under gravity［J］. Physics of Fluids, 2002, 14(11): 4012-4025. ［16］RANZ W E, MARSHALL W R. Evaporation from drops: Part I［J］. Chemical Engineering Progress, 1952, 48 (3): 141-146.

[1]	王雨风，王丹东，胡记超，陈亮，陈江平. 两相流CO2喷射器内部流场的数值模型[J]. 上海交通大学学报, 2019, 53(7): 860-865.
[2]	周志松，江龙，王丽伟，王如竹，高鹏. 非平衡条件下氯化锰-氨的吸附/解吸特性分析[J]. 上海交通大学学报（自然版）, 2016, 50(04): 583-587.
[3]	林芃1，王如竹2，徐振中2，邵飞1，王吉1. 管内垂直降膜绝热吸收评估方法与实验分析[J]. 上海交通大学学报（自然版）, 2013, 47(08): 1264-1270.
[4]	梁媛媛, 徐博, 陈江平. 结霜工况下平行流换热器的换热性能[J]. 上海交通大学学报（自然版）, 2013, 47(04): 674-678.
[5]	梁媛媛, 赵宇, 陈江平. 微通道平行流蒸发器仿真模型[J]. 上海交通大学学报（自然版）, 2013, 47(03): 413-416.
[6]	金晓明1, 杨马英2, 杨荻1. 超临界参数机组负荷控制与优化策略[J]. 上海交通大学学报（自然版）, 2012, 46(12): 1901-1906.
[7]	胡晓晨, 祁照岗, 殷礼鸣, 陈江平. 新型金属氢化物反应床传热性能分析[J]. 上海交通大学学报（自然版）, 2012, 46(04): 530-535.
[8]	徐志发, 宗军良. 超大型泥水平衡盾构施工对环境影响评价分析[J]. 上海交通大学学报（自然版）, 2011, 45(10): 1567-1570.
[9]	徐博1，张驰1，陈江平1，孙西辉2，马小魁2. 积液型两相流分配器的性能与优化[J]. 上海交通大学学报（自然版）, 2015, 49(01): 91-95.
[10]	马磊，谷波，田镇，李萍. 基于新流动沸腾传热关联式的微通道平行流蒸发器数值模型[J]. 上海交通大学学报, 2017, 51(9): 1043-1049.
[11]	王驿凯，叶祖樑，潘祖栋，赵建峰，胡斌，曹锋. 跨临界CO2热泵的热气旁通除霜方法及除霜时间分析[J]. 上海交通大学学报, 2019, 53(11): 1367-1374.

冰晶颗粒的浮升融化过程

Floating and Melting Process of an Ice Particle

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics

本文评价