Dynamic Modeling and Performance Evaluation of a Novel Humanoid Ankle Joint

doi:10.1007/s12204-022-2422-9

Abstract

Abstract: Aimed at the problems of design difficulty and weak kinematic performance caused by spherical joint, a novel PRC+PRCR+RR humanoid ankle joint based on the partially decoupled spherical parallel mechanism is proposed. According to screw theory, the degree of freedom and decoupling characteristics of this mechanism are analyzed. Based on Klein formula and virtual work principle, the kinematic expressions of each link and dynamic model are established. The correctness of the dynamic model is verified by combining the virtual prototype software and the ankle pose function obtained by gait planning and Fourier fitting. The workspace of this mechanism is mapped into a two-dimensional polar coordinate system with the azimuth and elevation angles of the spherical coordinate system as parameters. The motion/force transmission index and constraint index of this mechanism are evaluated and expressed in the workspace, showing this mechanism with excellent kinematic characteristics.

Key words: humanoid ankle joint, partial decoupling, screw theory, dynamic modeling, performance analysis

CLC Number:

TP242.6

LI Yanbiao∗ (李研彪), CHEN Ke (陈科), SUN Peng (孙鹏), WANG Zesheng (王泽胜). Dynamic Modeling and Performance Evaluation of a Novel Humanoid Ankle Joint[J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 570-578.

References 22

[1]	ZANG X, LIN Z, SUN X, et al. Biped robot design with variable ankle stiffness [J]. Journal of Mechanicsin Medicine and Biology, 2017, 17(7): 1740013.
[2]	ZHOU Y L, YANG L, XIAO C. Static stiffness property analyses of a novel PRRR+PURU+S spherical parallel humanoid robotic ankle mechanism [J]. China Mechanical Engineering, 2018, 29(5): 531-538 (in Chinese).
[3]	YANG L, ZHOU Y L, MA Q M. Statics property anal-yses of a novel spherical parallel humanoid roboticankle mechanism [J]. China Mechanical Engineering,2017, 28(7): 835-841 (in Chinese).
[4]	XU Y L, YANG L, YANG Z Y, et al. Dynamics prop-erty analyses of a novel PURU+RR+S spherical parallel humanoid robotic ankle mechanisms [J]. ChinaMechanical Engineering, 2017, 28(16): 1971-1976 (in Chinese).
[5]	YU Z W, W ANG L Q. Optimal design for biped robotparallel ankle joint [J]. Journal of Mechanical Engineering, 2009, 45(11): 52-57 (in Chinese).
[6]	BUSCHMANN T, LOHMEIER S, ULBRICH H. Hu-manoid robot Lola: Design and walking control [J].Journal of Physiology, 2009, 103(3/4/5): 141-148.
[7]	LOHMEIER S, BUSCHMANN T, ULBRICH H. System design and control of anthropomorphic walkingrobot LOLA [J]. IEEE/ASME Transaction on Mecha-tronics, 2009, 14(6): 658-666.
[8]	ALF AYAD S, OUEZDOU F B, NAMOUN F. Newthree DOF ankle mechanism for humanoid robotic ap-plication: Modeling, design and realization [C]//2009IEEE/RSJ International Conference on Intelligent Robots and Systems. St. Louis: IEEE, 2009: 4969-4976.
[9]	FU J H. Mechanical design and walking simulation of humanoid robot [D]. Shengyang: Northeastern Univer-sity, 2010 (in Chinese).
[10]	LUO J W. Research of key technologies of hydraulicactuated biped robot [D]. Harbin: Harbin Institute of Technology, 2014 (in Chinese).
[11]	ZHANG J Z, GAO F, ZHAO X C, et al. Dynamicanalysis and simulation of a 6-degree of freedom parallel earthquake simulator [J]. Journal of Shanghai Jiao-tong University, 2011, 45(9): 1263-1268 (in Chinese).
[12]	C H E N X L , G U O J Y , J I A Y H . R i g i d b o d y d y n a m i c smodeling and analysis of 3-RRPaR parallel mechanism[J]. Transactions of the Chinese Society for Agricul-tural Machinery, 2020, 51(6): 404-411 (in Chinese).
[13]	CHEN Z M, LIU X M, ZHANG Y, et al. Dynamicsanalysis of a symmetrical 2R1T 3-UPU parallel mech-anism [J]. Journal of Mechanical Engineering, 2017,53(21): 46-53 (in Chinese).
[14]	DAI J S. Geometrical foundations and screw alge-bra for mechanisms and robotics [M]. Beijing: China Higher Education Press, 2014 (in Chinese).
[15]	HUANG Z, ZENG D X. Calculation of freedom inmechanism: Principle and method [M]. Beijing: China Higher Education Press, 2016 (in Chinese).
[16]	XU Y D, TONG S S, W ANG B, et al. Three-branch2R1T fully-decoupled parallel mechanism with two ro-tational degrees of freedom [J]. Journal of Machine De-sign, 2019, 36(5): 25-29 (in Chinese).
[17]	MURRAY R M, LI Z X, SASTRY S S. A mathematicalintroduction to robotic manipulation [M]. Boca Raton:CRC Press, 1994.
[18]	GALLARDO-AL V ARADO J, RODRíGUZE-CASTRO R, DELOSSANTOS-LARA P J. Kine-matics and dynamics of a 4-PRUR Sch?nflies parallelmanipulator by means of screw theory and theprinciple of virtual work [J]. Mechanism and MachineTheory, 2018, 122: 347-360.
[19]	HAN B, HAN Y Y, XU Y D, et al. Kinematic characteristics and dynamics analysis of the tetrahedraldeployable mechanism based on the screw theory [J].Robot, 2020, 42(1): 21-28 (in Chinese).
[20]	DUAN J T. Leg structure and driving device de-sign of lightweight humanoid robot [D]. Zhengzhou:Zhengzhou University, 2018 (in Chinese).
[21]	W ANG J S, WU C, LIU X J. Performance evaluationof parallel manipulators: Motion/force transmissibility and its index [J]. Mechanism and Machine Theory,2010, 45(10): 1462-1476.
[22]	CHEN X, XIE F G, LIU X J. Evaluation of the maxi-mum value of motion/force transmission power in parallel manipulators [J]. Journal of Mechanical Engineering, 2014, 50(3): 1-9 (in Chinese).