上海交通大学学报(英文版) ›› 2012, Vol. 17 ›› Issue (3): 273-276.doi: 10.1007/s12204-012-1267-z
WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇) ZHU Yu (朱昱), WANG Xing-xing (汪兴兴)
出版日期:
2012-06-30
发布日期:
2012-11-15
通讯作者:
NI Hong-jun (倪红军)
E-mail:hjni910@yahoo.com.cn
WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇) ZHU Yu (朱昱), WANG Xing-xing (汪兴兴)
Online:
2012-06-30
Published:
2012-11-15
Contact:
NI Hong-jun (倪红军)
E-mail:hjni910@yahoo.com.cn
摘要: A series of Mg-12Zn-4Al-0.3Mn (ZA124) based alloys with additions of calcium have been prepared and their microstructure and properties have been investigated. The results show that Mg-12Zn-4Al-0.3Mn alloy consists of the α-Mg matrix and block quasicrystal and exhibits excellent creep resistance compared to commonly used AZ91 alloy. A small amount of calcium addition to the ZA124 based alloys increased the yield strenghth at both ambient and elevated temperatures as well as creep resistance, although the ductility decreased slightly. Microanalysis indicated that the addition of calcium decreased the quasicrystalline phase and caused the formation of some lamellar precipitates of Al2Mg5Zn2 with orthorhombic crystal structure. This Ca-containing Al2Mg5Zn2 phase with high stability straddled the grain boundaries and strengthened grain boundaries by inhibiting crack propagation during creep tests at elevated temperature.
中图分类号:
WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇). Improvements of Elevated Temperature Strength and Creep Resistance of Mg-12Zn-4Al Based Alloy with Calcium Addition[J]. 上海交通大学学报(英文版), 2012, 17(3): 273-276.
WAN Xiao-feng (万晓峰), NI Hong-jun (倪红军), HUANG Ming-yu (黄明宇). Improvements of Elevated Temperature Strength and Creep Resistance of Mg-12Zn-4Al Based Alloy with Calcium Addition[J]. Journal of shanghai Jiaotong University (Science), 2012, 17(3): 273-276.
[1] Luo A A. Recent magnesium alloy development for elevated temperature applications [J]. International MaterialsReviews, 2004, 49(1): 13-30.[2] Pekguleryuz M, Celikin M. Creep resistance in magnesium alloys [J]. International Materials Reviews, 2010, 55(4): 197-217.[3] Tardif S, Tremblay R, Dub′e D. Influence of cerium on the microstructure and mechanical properties of ZA104 and ZA104 + 0.3Ca magnesium alloys [J]. MaterialsScience and Engineering A, 2010, 527(29-30):7519-7529.[4] Kim D H, Lee J Y, Lim H K, et al. Effect of Al addition on the elevated temperature deformation behaviorof Mg-Zn-Y alloy [J]. Materials Science and Engineering A, 2008, 487(1-2): 481-487.[5] Liu Chu-ming, Zhu Xiu-rong, Zhou Hai-tao. Magnesium phase diagram [M]. Changsha, China: CentralSouth University of Technology Press, 2006: 154-159(in Chinese).[6] Rajasekharan T, Akhtar D, Gopalan R, et al. The quasi-crystalline phase in the Mg-Al-Zn system [J]. Nature, 1986, 322: 528-530.[7] Elser, V. Indexing problems in quasicrystal diffraction [J]. Physical Review B, 1985, 32(8): 4892-4898.[8] Xue Feng, Ming Xue-gang, Sun Yang-shan. Microstructures and mechanical properties of AZ91 alloywith combined additions of Ca and Si [J]. Journal of Materials Science, 2006, 41(15): 4725-4731.[9] Vogel M, Kraft O, Dehm G, et al. Quasi-crystalline grain-boundary phase in the magnesium die-cast alloyZA85 [J]. Scripta Materialia, 2001, 45(5): 517-524.[10] Xiao Ji-mei. Energetics of alloys [M]. Shanghai: Shanghai Science and Technology Press, 1985: 256-257(in Chinese). |
[1] | JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fa. High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157. |
[2] | SUI Da-shan*(隋大山), GAO Liang (高 亮), CUI Zhen-shan (崔振山). Microstructure Evolution of Different Forging Processes for 12%Cr Steel During Hot Deformation[J]. 上海交通大学学报(英文版), 2015, 20(5): 606-611. |
[3] | TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永),. Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31[J]. 上海交通大学学报(英文版), 2013, 18(2): 186-189. |
[4] | SUN Weia* (孙威), XIONG Xianga (熊翔), LI Xiao-binb (李小斌), LI Guo-donga (李国栋). Mechanical Properties and Residue Stress of Four Kinds of ZrC Coatings Prepared by Chemical Vapor Deposition[J]. 上海交通大学学报(英文版), 2012, 17(6): 706-711. |
[5] | LI Da1,2 (李达), CUI Zhan-quan2 (崔占全), YANG Qing-xiang2* (杨庆祥),SUN Bing1 (孙兵), SUN. Microstructure and Property of Friction Stir Welding Joint of 7075Al and AZ31BMg[J]. 上海交通大学学报(英文版), 2012, 17(6): 679-683. |
[6] | WANG Gui-songa,b* (王桂松), LUO Yanga (罗阳), LIU Bao-xia (刘宝玺),YIN Chenga (尹成), GENG. Effect of Gr Content and Hot Extrusion on Tensile Properties of (Nano-SiCp+Gr)/Cu Composites Fabricated by Powder Metallurgy[J]. 上海交通大学学报(英文版), 2012, 17(6): 658-662. |
[7] | ZHAO Su1* (赵素), WU Yu-juan2* (吴玉娟), HE Mei-feng3 (何美凤), ZHANG Li4 (张立). Effects of Cooling Rates on Microstructures and Mechanical Properties of Nb-Ti Microalloyed Steel[J]. 上海交通大学学报(英文版), 2012, 17(6): 653-657. |
[8] | LIU Li1,2* (刘礼), MA Xiao-li1 (马晓丽), ZHAO Su3 (赵素) . Microstructure and Hardness of Ni-xSi Alloys [J]. 上海交通大学学报(英文版), 2012, 17(6): 648-652. |
[9] | JIANG Bin1 (姜斌), LIU Xu-he1 (刘旭贺), WU Rui-zhi1 (巫瑞智), ZHANG Mi-lin1 (张密林). Microstructures and Mechanical Properties of Various Mg-Li Wrought Alloys[J]. 上海交通大学学报(英文版), 2012, 17(3): 297-300. |
[10] | LIU Yong1 (刘勇), SHAO Shuang1 (邵爽), XU Chun-shui1 (徐春水), LIU Ke-ming2 (刘克明). Study on the Thermal Stability of Cu-14Fe in Situ Composite without and with Trace Ag[J]. 上海交通大学学报(英文版), 2012, 17(3): 268-272. |
[11] | RONG Hui (荣辉), QIAN Chun-xiang (钱春香). Development of Microbe Cementitious Material in China[J]. 上海交通大学学报(英文版), 2012, 17(3): 350-355. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||