Journal of Shanghai Jiao Tong University ›› 2018, Vol. 52 ›› Issue (11): 1444-1451.doi: 10.16183/j.cnki.jsjtu.2018.11.005
Special Issue: 王建华教授学报发文专辑
Previous Articles Next Articles
MA Helong1(), LIAO Chencong1(
), WANG Jianhua1, LI Yaoliang2
Received:
2017-05-23
Online:
2018-11-01
Published:
2021-06-04
Contact:
LIAO Chencong
E-mail:1104827221@sjtu.edu.cn;billaday@sjtu.edu.cn
CLC Number:
MA Helong, LIAO Chencong, WANG Jianhua, LI Yaoliang. Field Test of Mechanical Properties of Large Diameter Steel Jacking Pipe Under Construction and Temperature Load in Soft Soil[J]. Journal of Shanghai Jiao Tong University, 2018, 52(11): 1444-1451.
[1] | ZHEN L, CHEN J J, QIAO P, et al. Analysis and remedial treatment of a steel pipe-jacking accident in complex underground environment[J]. Engineering Structures, 2014, 59(2): 210-219. |
[2] | MILLIGAN G W E, NORRIS P. Site-based research in pipe jacking—objectives, procedures and a case history[J]. Tunnelling and Underground Space Technology, 1996, 11(95): 3-24. |
[3] | NORRIS P. The behaviour of jacked concrete pipes during site installation[J]. University of Oxford, 1992, 12: 65-90. |
[4] | MILLIGAN G W E, NORRIS P. Pipe-soil interaction during pipe jacking[J]. Institution of Civil Engineers: Geotechnical Engineering, 1999, 132(1): 27-44. |
[5] | NAZEMI N, DAS S, KENNO S. Finite element analysis for telescopic deformation and tearing rupture of wrinkled pipe[J]. International Journal of Offshore and Polar Engineering, 2009, 19(3): 224-231. |
[6] | ANDREUZZI F, PERRONE A. Analytical solution for upheaval buckling in burried pipeline[J]. Computer Methods in Applied Mechanics and Engineering, 2001, 190(39): 5081-5087. |
[7] | 朱合华, 吴江斌, 潘同燕. 曲线顶管的三维力学模型理论分析与应用[J]. 岩土工程学报, 2003, 25(4): 492-495. |
ZHU Hehua, WU Jiangbin, PAN Tongyan. Theoretical analysis of three-dimensional mechanical model of curved pipe jacking and its application[J]. Chinese Journal of Geotechnical Engineering, 2003, 25(4): 492-495. | |
[8] | 王承德. 顶进管道受力分析[J]. 特种结构, 2006, 23(4): 87-89. |
WANG Chengde. Load condition analysis of pipe jacking[J]. Special Structures, 2006, 23(4): 87-89. | |
[9] | 中国工程建设标准化协会. 给水排水工程顶管技术规程: CECS 246-2008[S]. 北京: 中国计划出版社, 2008. |
China Association for Engineering Construction standardizaiton. Technical specification for pipe jacking of water supply and sewerage engineering: CECS 246-2008[S]. Beijing: China Planning Press, 2008. | |
[10] | 雷晗, 陈锦剑, 王建华, 等. 大直径砼顶管的管道受力特性分析[J]. 上海交通大学学报, 2011, 45(10): 1493-1497. |
LEI Han, CHEN Jinjian, WANG Jianhua, et al. Analysis on performance of large diameter concrete jacking pipe[J]. Journal of Shanghai Jiao Tong University, 2011, 45(10): 1493-1497. | |
[11] | 黄吉龙, 陈锦剑, 王建华, 等. 大口径顶管顶进过程的数值模拟分析[J]. 地下空间与工程学报, 2008, 4(3): 489-493. |
HUANG Jilong, CHEN Jinjian, WANG Jianhua, et al. Numerical analysis of large diameter pipe-jacking[J]. Chinese Journal of Underground Space and Engineering, 2008, 4(3): 489-493. | |
[12] | 蒋洪胜, 侯学渊. 软土地层中的圆形隧道载荷模式研究[J]. 岩石力学与工程学报, 2003, 22(4): 651-658. |
JIANG Hongsheng, HOU Xueyuan. Study of the loading pattern on circular tunnel in soft ground[J]. Chinese Journal of Rock Mechanics and Engineering, 2003, 22(4): 651-658. | |
[13] | 刘翔, 白海梅, 陈晓晨, 等. 软土中大直径顶管管道受力特性测试[J]. 上海交通大学学报, 2014, 48(11): 1503-1509. |
LIU Xiang, BAI Haimei, CHEN Xiaochen, et al. Field test of mechanical properties of large diameter concrete jacking pipe[J]. Journal of Shanghai Jiao Tong University, 2014, 48(11): 1503-1509. | |
[14] | 张鹏, 王翔宇, 曾聪, 等. 深埋曲线钢顶管受力特性现场监测试验研究[J]. 岩土工程学报, 2016, 38(10): 1842-1848. |
ZHANG Peng, WANG Xiangyu, ZENG Cong, et al. Site monitoring of mechanical characteristics of pipes during steel curved pipe jacking under large buried depth[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(10): 1842-1848. | |
[15] | CUI Q L, XU Y S, SHEN S L, et al. Field performance of concrete pipes during jacking in cemented sandy silt[J]. Tunnelling and Underground Space Technology Incorporating Trenchless Technology Research, 2015, 49: 336-344. |
[1] | CAO Huan, CAI Ao, CHEN Yangyu, ZUO Wenkang, CHEN Mantai. Behavior of High Strength Steel Butt Joints at Arctic Low Temperatures [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 533-540. |
[2] | Xu Qingyu, Hai Jizhe, Shan Chunlong, Li Haijie. Mechanical and Permeability Properties of Radial-Gradient Bone Scaffolds Developed by Voronoi Tessellation for Bone Tissue Engineering [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(3): 433-445. |
[3] | ZENG Jingbo, WANG Huoping. Effect of Heat Input on Microstructure and Mechanical Properties of FCAW-G Joints of Extra High Strength Steel [J]. Ocean Engineering Equipment and Technology, 2025, 12(1): 67-73. |
[4] | LI Zhiqiang, XU Bin, LIN Nan, WANG Yichong, FAN Genlian, TAN Zhanqiu, ZHANG Di. Research Progress of Advanced of High Modulus and Ductile CNT/Al Composites [J]. Air & Space Defense, 2024, 7(6): 29-37. |
[5] | SAKTHIESWARAN N.a∗, MOORTHY N.b, RENISHA M.a, CHINNADURAI M.c). Optimization of Strength Properties of Reactive Powder Concrete by Response Surface Methodology [J]. J Shanghai Jiaotong Univ Sci, 2024, 29(5): 900-908. |
[6] | CAI Ao, CHEN Mantai, ZUO Wenkang, DUAN Liping, ZHAO Jincheng. Experimental Study and Prediction Model of Low Temperature Mechanical Properties of High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2024, 58(11): 1707-1715. |
[7] | XU Yuanjing, GAO Haifeng, WU Yuncheng, LIU Yihao, ZHANG Ziyan, HUANG Chenglan, WANG Zanbo, LIU Tongyou, WANG Caiping, MIAO Weiqiang, WANG Jinwu. Finite Element Analysis of Decompression Effect of Custom Additively Manufactured Knee Orthosis Compartments [J]. Journal of Shanghai Jiao Tong University, 2023, 57(5): 560-569. |
[8] | BAO Haisheng (鲍海生), LIU Longquan∗ (刘龙权). Fabrication and Characterization of Graphene-Enhanced Hollow Microlattice Materials [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 192-196. |
[9] | WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen. Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358. |
[10] | WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756. |
[11] | ZHANG Wei,AO Sansan, LUO Zhen,HAO Zhizhuang,CHEN Yao,FENG Mengnan,XIE Yan. Effect of Welding Energy on the Performance of Aluminum-Nickel Ultrasonic Welding Joints [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1130-1135. |
[12] | ZHU Qiang,QIN Fei,WANG Wurong,WEI Xicheng. Mechanical Properties of Three-Sheet Resistance Spot Welded Joints Under Different Lapping Orders [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1122-1129. |
[13] | HE Guanzhong,LOU Ming,MA Yunwu,LI Yongbing. Simulation on Mechanical Properties of Resistance Element Welding of Aluminum and Steel [J]. Journal of Shanghai Jiaotong University, 2019, 53(5): 616-623. |
[14] | QI Ruige,HE Chunxia,FU Jingjing,ZHAO Limei,JIANG Caiyun. ffect of Inorganic Nanoparticles on the Thermal and Mechanical Properties of Wood Fiber/HDPE Composites [J]. Journal of Shanghai Jiaotong University, 2019, 53(3): 373-379. |
[15] | LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 548
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 747
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||