FEM Analysis on the Buckling of a Long Steel Jacking Pipe

doi:10.16183/j.cnki.jsjtu.2012.05.031

Abstract

Abstract:

The buckling of steel jacking-pipe under complex loads has been an important factor in construction because of the increasing of diameter and jacking distance. Numerical analysis on the buckling of long steel jacking pipe, whose distance-diameter ratio is larger than 100, is studied in this paper with finite element method (FEM). The first buckling mode of pipe-jacking under different loads are obtained by the buckle analysis. By introducing the first mode as the initial imperfection, the elastic-plastic buckling behavior of steel pipes is analyzed with the RIKS method. Both the buckling mode and ultimate load of buckling of the steel jacking pipe are discussed, and the buckling phenomenon in practice is verified. Parametric analysis shows that the stability of steel pipe can be improved by reducing friction and face resistance of pipe-jacking, and the jacking load of the pipes with high confining pressure should be carefully controlled.

Key words: steel pipe-jacking, buckling, finite element method, buckling mode, RIKS method

CLC Number:

TU992

CHEN Nan, CHEN Jin-jian, XIA Xiao-he, WANG Jian-hua, ZHONG Jun-bin. FEM Analysis on the Buckling of a Long Steel Jacking Pipe[J]. Journal of Shanghai Jiao Tong University, 2012, 46(05): 832-836.

Figures/Tables 9

Fig. 1

Tab. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

References 9

[1]	陈绍蕃. 钢结构稳定设计指南. [M]. 2版. 北京: 中国建筑工业出版社, 2004.
[2]	崔德刚, 结构稳定性设计手册[M]. 北京: 航空工业出版社, 2006.
[3]	Teng J G, Rotter J M. Buckling of pressurized axisym-metrically imperfect cylinders under axial loads[J]. Journal of Engineering Mechanics, ASCE, 1992, 118(2): 229-247.
[4]	祝恩淳, Mandal P, Calladine C R. 轴压圆柱薄壳的屈曲分析[J]. 土木工程学报, 2001, 34(3): 18-23.
	ZHU En-chun, MANDAL P, CALLADINE C R. Analysis of buckling of thin cylindrical shells under axial compression[J]. China Civil Engineering Journal, 2001, 34(3): 18-23.
[5]	卢红前. 大直径钢顶管弹塑性设计方法的建立与探讨[J]. 武汉大学学报: 工学版, 2004, 37(S): 169-173.
	LU Hong-qian. Establishment and analysis of elastoplastic design method for large diameter steel conduit jacking[J]. Engineering Journal of Wuhan University, 2004, 37(S):169-173.
[6]	赵志峰, 邵光辉. 顶管施工中钢管管壁稳定性分析及壁厚的优化[J]. 武汉大学学报: 工学版, 2011, 44(4):481-486.
	ZHAO Zhi-feng, SHAO Guang-hui. Stability analysis of wall stability of steel pipe in pipe-jacking and optimization of proper wall thickness[J]. Engineering Journal of Wuhan University, 2011, 44(4):481-486.
[7]	夏才初, 潘国荣. 土木工程监测技术[M]. 北京: 中国建筑工业出版社, 2001.
[8]	CECS 246—2008，给排水工程顶管技术规范[S].北京: 中国计划出版社, 2008.
[9]	Feng Y T, Peric D, Owen D R J. A new criterion for determination of initial loading parameter in arc-length methods[J]. Computers & Structures, 1996, 58(3): 479-485.

工况	计算值	理论值	差距／%
轴压承载力／kN	4 858	4 844	0.30
极限围压／kPa	635.6	633.1	0.41

[1]	Chen Huiran, Fu Rongchang, Yang Xiaozheng, Li Pengju, Wang Kun. Effect of Stride Length on Knee Contact [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(4): 759-767.
[2]	Li Pengju, Fu Rongchang, Yang Xiaozheng, Wang Kun. Dynamic Response of Idiopathic Scoliosis and Kyphosis Spine [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(3): 482-492.
[3]	GUO Li, YUAN Yuchao, TANG Wenyong. Inversion of Displacement Field of Marine Slender Pipelines Under Three-Dimensional Background Ocean Currents [J]. Journal of Shanghai Jiao Tong University, 2025, 59(12): 1815-1823.
[4]	JIANG Jie, CHEN Lijun, CHAI Wencheng, AI Yonglin, OU Xiaoduo, GONG Jian. Force and Deformation Analysis of H(t)-T Loaded Pile Based on Pasternak Foundation Model [J]. Journal of Shanghai Jiao Tong University, 2025, 59(1): 60-69.
[5]	WANG Xianfeng, ZOU Fan, LIU Chang, AN Qinglong, CHEN Ming. Influence of Countersink Fillet Radius on Mechanical Performance of CFRP/Al Bolted Joints [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 342-351.
[6]	ZHAI Xumao, TIAN Xinwei, ZHANG Chuanbin, LI Yujuan, LIU Shuo, CUI Yi. Coupling Characteristics of Lubrication and Flexible Multibody Dynamics of Piston-Liner Pairs in Diesel Engines [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 324-332.
[7]	CHEN Erdong, GAO Zihang, WANG Kundong, LEI Huaming. Design of a Rapid Thermal Cycling System for Real-Time Fluorescent PCR with Zone Temperature Control [J]. Journal of Shanghai Jiao Tong University, 2023, 57(9): 1196-1202.
[8]	HUANG Huaizhou, WANG Hailong, YUAN Yujie, HOU Tao, SHI Rui, YE Maosheng. A Simplified Calculation of Doubler Plate Reinforced Tubular T Joints [J]. Ocean Engineering Equipment and Technology, 2023, 10(4): 64-69.
[9]	WANG Qian, DING Xiaohong, ZHANG Heng. Stiffener Layout Optimization of Thin-Walled Structures Through Thick/Thin Generic Quadrilateral Shell Elements [J]. Air & Space Defense, 2023, 6(2): 55-61.
[10]	AZKA Umar ∗, JIANG Chun (姜淳), KHUSHIK Muhammad Hanif Ahmed Khan. Band Structure Characteristics of Two-Dimensional Si-A (Ge, Pb, Sn) Alloy-Air Holes Thermal Crystals [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 180-185.
[11]	WANG Rui, HU Zhiping, YIN Ke, MA Jiakuan, REN Xiang. Dynamic Responses Law of Subgrade of a Special Railway Line in Loess Region [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 908-918.
[12]	MA Zunnong, ZHANG Yansong, ZHAO Yixi. Mechanism and Influencing Factors of Frictional Energy Dissipation in Multilayer Ultrasonic Welding [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 772-783.
[13]	ZHANG Peizhen, LIN Fang. Sound Scattering Characteristics of Oxygen Cylinder for Open Breathing Diver [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 764-771.
[14]	HOU Yanguo, LI Zhanjie, GONG Jinghai. Application of Plane Elements and Shell Elements in Imitating Ribs of Members in Compound Strip Method [J]. Journal of Shanghai Jiao Tong University, 2022, 56(6): 710-721.
[15]	LI Yuanhui, LI Jianjun, WANG Shunchao, ZHANG Longyao, ZHU Wenfeng. Modeling and Experiment on Roll-Hemming Forming Process of Aluminum Alloy Sheet with Adhesive [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 532-542.