［1］徐迎强, 薛克敏，曹婷婷，等. 汽车门槛内板零件冲压数值模拟及参数优化［J］. 精密成形工程, 2010, 2(3): 3640.

XU Yingqiang，XUE Kemin，CAO Tingting, et al. Numerical simulating and parameter optimizing of the stamping forming process of auto doorsill’s inner panels［J］. Journal of Netshape Forming Engineering, 2010, 2(3):3640.

［2］李玉强. 板料拉深成形工艺的6sigma稳健优化设计研究［D］. 上海：上海交通大学机械与动力工程学院, 2006.

［3］Liew K M, Tapabrata Ray, Tan H, et al. Evolutionary optimization and use of neural network for optimum stamping process design for minimum springback［J］. Journal of Computing and Information Science in Engineering, 2002, 2(1): 3844.

［4］Jakumeit J, Herdy M, Nitsche M. Parameter optimization of the sheet metal forming process using an iterative parallel Kriging algorithm［J］. Structural and Multidisciplinary Optimization, 2005, 29(6): 498507.

［5］安治国. 径向基函数模型在板料成形工艺多目标优化设计中的应用［D］. 重庆： 重庆大学材料工程学院, 2009.

［6］Rong Q E, Cheng C W. Latin hypercube sampling in ultimate strength reliability of ship hull grider［J］．Journal of Ship Mechanics, 2002, 6(3): 5257.

［7］Yu H, Chung C Y, Wong K P, et al. Probabilistic load flow evaluation with hybrid Latin hypercube sampling and Cholesky decomposition［J］. IEEE Transactions on Power Systems, 2009, 24(2): 661667.

［8］Tien H, Vishy K. Hydrogen powered car: Twostage modeling system ［J］. International Journal of Hydrogen Energy, 2011, 36（16）: 1006510079.