基于双自由度万向轮机构的爬壁机器人运动状态检测

上海交通大学学报（自然版） ›› 2015, Vol. 49 ›› Issue (03): 379-382.

• 自动化技术、计算机技术 • 上一篇下一篇

基于双自由度万向轮机构的爬壁机器人运动状态检测

郑军,邱强，李鹏，潘际銮

（清华大学机械工程系先进成形制造教育部重点实验室，北京 100084）

收稿日期:2014-07-28 出版日期:2015-03-30 发布日期:2015-03-30
基金资助:
国家高技术研究发展计划(863)项目（SS2013AA041003）资助

Motion State Detection Technique for WallClimbing Robot Base on Two Degree of Freedom Universal Wheel Mechanism

ZHENG Jun，QIU Qiang，LI Peng，PAN Jiluan

(Key Laboratory for Advanced Materials Processing Technology of the Ministry of Education, Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China)

Received:2014-07-28 Online:2015-03-30 Published:2015-03-30

摘要/Abstract

摘要：

摘要：设计了基于双自由度万向轮机构的速度测量装置，该装置由双自由度滚轮、旋转编码器、角位移传感器和水平姿态传感器等构成.机器人运动时，利用水平姿态传感器检测爬行机构的转动角速度，双自由度万向轮机构利用角度传感器测量速度方向，利用光电编码器测量速度大小，实现对机器人运动状态的测量.根据其测量结果，建立了电动机输入和控制点运动状态之间的关系，为机器精确任务操作提供了基础.

关键词: , 爬壁机器人, 万向轮, 运动状态检测

Abstract:

Abstract： The speed measuring mechanism base on two degree freedom universal wheel was designed, which consisted of a two degree of freedom roller, a rotary encoder, an angular displacement sensor and a horizontal attitude sensor and so on. When the robot moved, its attitude angle and angular velocity were detected by the level posture sensor, its velocity direction was detected by the angle sensor, and its speed was measured by the photoelectric encoder, thus, the motion state of the robot can be obtained by this measuring device, and the relationship between the motor input and control point motion was also established, provide basis for the precise operation of the robot.

Key words: wall-climbing robot, universal wheel, motion state detection

中图分类号:

TP 242

郑军,邱强，李鹏，潘际銮. 基于双自由度万向轮机构的爬壁机器人运动状态检测[J]. 上海交通大学学报（自然版）, 2015, 49(03): 379-382.

ZHENG Jun，QIU Qiang，LI Peng，PAN Jiluan. Motion State Detection Technique for WallClimbing Robot Base on Two Degree of Freedom Universal Wheel Mechanism[J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 379-382.

参考文献

［1］Vagrancy J，Aldon M J, Fournier A. Mobile robot attitude estimation by fusion of inertial data ［C］∥Proceedings of the 1993 IEEE Conference on Robotics and Automation. Los Alamitos: The IEEE Computer Society Press, 1993: 277282.

［2］宋亦旭, 谈大龙. 基于内部传感器的轮式移动机器人运动速度估计［J］. 控制理论与应用, 2003,20(4):537546.

SONG Yixu, Tan Dalong. Wheeled mobile robot based on internal sensor speed estimation ［J］. Control Theory and Applications, 2003, 20(4): 537546.

［3］侯国庆. 移动机器人行走系统的运动学分析和稳定性研究［D］. 天津: 河北工业大学, 2007.

［4］Parsa K，Angeles J，Misra A K. Poseandtwist estimation rigid body using accelerometers［C］∥Proceedings of the 2001 IEEE International Conference on Robotics and Automation. Korea：The IEEE Computer Society Press, 2001: 28732878.

［5］黄思姬, 欧屹, 陶卫军，等. 履带式地面移动机器人动力学模型分析［J］. 机电工程, 2011, 28(3): 280285.

HUANG Siji, OU Yi, TAO Weijun, et al. Caterpillar ground mobile robot dynamics model analysis ［J］. Mechanical and Electrical Engineering，2011，28(3): 280285.

［6］耿军晓, 邢琳芬, 张志远. 基于速度观测器的移动机器人轨迹跟踪控制［J］. 徐州工程学院学报, 2010, 25(3): 1318.

GENG Junxiao, XING Linfen，ZHANG Zhiyuan. Speed observer based mobile robot trajectory tracking control ［J］. Journal of Xuzhou Engineering Institute, 2010, 25(3): 1318.

［7］康亮, 赵春霞, 郭剑辉. 履带式移动机器人轨迹跟踪研究［J］. 计算机科学, 2009, 36(6): 241244.

KANG Liang, ZHAO Chunxia,GUO Jianhui. Crawler mobile robot trajectory tracking study ［J］. Journal of Computer Science, 2009, 36(6): 241244.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[12]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[13]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[14]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.
[15]	WU Jin, MIN Yu, YANG Xiaodie, MA Simin . Micro-Expression Recognition Algorithm Based on Information Entropy Feature[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(5): 589-599.

基于双自由度万向轮机构的爬壁机器人运动状态检测

Motion State Detection Technique for WallClimbing Robot Base on Two Degree of Freedom Universal Wheel Mechanism

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价