Modeling the Completely Recrystallized Grain Growth of NiCrMoV Rotor Steel

doi:10.1007/s12204-015-1667-y

Abstract

Abstract: The present study focuses on the completely recrystallized grain growth of NiCrMoV steel. All the samples were austenitised at 1 250 ?C for 5min, and then were compressed with strain rate of 0.01 s?1 and finial strain of 0.8. Once the compression completed, the specimens were held for different time before water quenching. Based on the experimental results, the completely recrystallized grain growth model was established and the effects of temperature and holding time on austenite grain size were investigated. Comparison between the experimental and predicted results was carried out. A good agreement between the experimental and predicted results verifies the developed model.

Key words: NiCrMoV steel| recrystallized grain growth| modeling

摘要： The present study focuses on the completely recrystallized grain growth of NiCrMoV steel. All the samples were austenitised at 1 250 ?C for 5min, and then were compressed with strain rate of 0.01 s?1 and finial strain of 0.8. Once the compression completed, the specimens were held for different time before water quenching. Based on the experimental results, the completely recrystallized grain growth model was established and the effects of temperature and holding time on austenite grain size were investigated. Comparison between the experimental and predicted results was carried out. A good agreement between the experimental and predicted results verifies the developed model.

关键词: NiCrMoV steel| recrystallized grain growth| modeling

CLC Number:

TG 314.4

CHEN Fei*(陈飞), LI Cui-dong (李翠冬), CUI Zhen-shan (崔振山). Modeling the Completely Recrystallized Grain Growth of NiCrMoV Rotor Steel[J]. Journal of shanghai Jiaotong University (Science), 2015, 20(5): 600-605.

References 9

[1]	Cao Y C, Wei X L, Wu J X, et al. Development of ultra-supercritical power plant in china[C]//International Conference on Power Engineering.Hangzhou, China: [s.n.], 2007: 231-236.
[2]	Chen Fei. Simulation of microstructure evolution during discontinuous hot forging processes using cellular automaton method [D]. Shanghai: School of Materials Science and Engineering, Shanghai Jiao Tong University,2012 (in Chinese).
[3]	Chen R K, Gu J F, Han L Z, et al. Novel process to refine grain size of NiCrMoV steel [J]. Material Science Technology, 2012, 28(7): 773-778.
[4]	ASTM E112-13, Standard test methods for determining average grain size [S].
[5]	Sakai T. Dynamic recrystallization microstructures under hot working conditions [J]. Journal of Materials Processing Technology, 1995, 53: 349-361.
[6]	Shaban M, Eghbali B. Characterization of austenite dynamic recrystallization under different Z parameters in a microalloyed steel [J]. Journal of Materials Science & Technology, 2011, 27(4): 359-363.
[7]	Kim S-II, Yoo Y C. Dynamic recrystallization behavior of AISI 304 stainless steel [J]. Materials Science and Engineering A, 2001, 311(1): 108-113.
[8]	Muojekwu C A. Modeling of thermomechanical and metallurgical phenomena in steel strip during hot direct rolling and run out table cooling of thin-cast slabs[D]. Columbia: Department of metals and Materials engineering, the University of British Columbia, 1998.
[9]	Sellars C M. Computer modelling of hot-working processes [J]. Materials Science and Technology, 1985,1: 325-331.

[1]	LI Yanbiao∗ (李研彪), CHEN Ke (陈科), SUN Peng (孙鹏), WANG Zesheng (王泽胜). Dynamic Modeling and Performance Evaluation of a Novel Humanoid Ankle Joint [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 570-578.
[2]	WANG Xiaojian, HONG Jun, CHEN Jinghua, LI Hongguang. Weight Reduction Study of Box Structure Based on Parametric Modeling and Response Surface Optimization [J]. Air & Space Defense, 2022, 5(4): 60-66.
[3]	XU Zhendong, DUAN Yuxuan, XU Huasong, YANG Fan, LI tie. Extension of the Local Domain-Free Discretization Method to Large Eddy Simulation of Turbulent Flows [J]. Air & Space Defense, 2022, 5(3): 93-98.
[4]	HU Jinshuo, HUANG Jianzhe. Dynamics Modeling and Validation of Coaxial Lifting Rotors [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 395-402.
[5]	HU Bin, HE Qiang, WU Yatao, SUN Qingyang, LIU Yunshen. Modeling and Characteristics Analysis of Two-Dimensional Space-Time Clutter for Airborne Bistatic Radar [J]. Air & Space Defense, 2022, 5(1): 37-44.
[6]	CHEN Yongxin. Integrated Design Optimization for Aerodynamic Configuration and Trajectory of Gliding Vehicle [J]. Air & Space Defense, 2021, 4(3): 76-84.
[7]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[8]	CHEN Fanji (陈范吉), JIANG Pingping (姜萍萍), YAN Guozheng (颜国正), WANG Wei (汪炜), MENG Yicun (孟一村). Design of Multi-Coil Wireless Power Transfer System for Gastrointestinal Capsule Robot [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 76-83.
[9]	ZHANG Xianku, HAN Xu. Modeling and Sliding Mode Control for Chaotic Yawing Phenomenon of Large Oil Tanker [J]. Journal of Shanghai Jiao Tong University, 2021, 55(1): 40-47.
[10]	LI Yanhong, TANG Chengshi, ZHAO Lyuyi, HU Qipeng, CHAI Juanfang, YAO Xinyu. Visual Modeling Method Study of Complex System Real-time Simulation [J]. Air & Space Defense, 2020, 3(4): 30-37.
[11]	JIA Rongquan, WANG Li. Research on Infrared Characteristics Simulation & Modeling Method of Complex Cloud Background Environment [J]. Air & Space Defense, 2020, 3(4): 38-43.
[12]	BESSAAD Nassim, BAO Qilian, SUN Shuodong, DU Yuding, LIU Lin, HASSAN Mahmood Ul . Adaptive Dual Wavelet Threshold Denoising Function Combined with Allan Variance for Tuning FOG-SINS Filter [J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 434-440.
[13]	REN Yuanyuan,LI Xiansheng,ZHENG Xuelian,WANG Jie. Accurate Dynamics Modeling and Roll Stability of Tank Vehicle [J]. Journal of Shanghai Jiaotong University, 2020, 54(3): 312-321.
[14]	ZHAO Meng, CHEN Yong, TANG Chao, LI Haomin, XIE Youbai. A State-Integrated Approach for Generalized Functional Modeling [J]. Journal of Shanghai Jiao Tong University, 2020, 54(12): 1227-1234.
[15]	ZHANG Weikai,HU Peng. Influence of Empirical Relation Uncertainty for Water Entrainment on Layer-Averaged Numerical Modeling of Turbidity Currents [J]. Journal of Shanghai Jiaotong University, 2020, 54(1): 35-42.