Journal of shanghai Jiaotong University (Science) ›› 2015, Vol. 20 ›› Issue (5): 600-605.doi: 10.1007/s12204-015-1667-y
Previous Articles Next Articles
CHEN Fei*(陈 飞), LI Cui-dong (李翠冬), CUI Zhen-shan (崔振山)
Online:
2015-10-28
Published:
2015-10-29
Contact:
CHEN Fei(陈 飞)
E-mail:feichen@sjtu.edu.cn
CLC Number:
CHEN Fei*(陈 飞), LI Cui-dong (李翠冬), CUI Zhen-shan (崔振山). Modeling the Completely Recrystallized Grain Growth of NiCrMoV Rotor Steel[J]. Journal of shanghai Jiaotong University (Science), 2015, 20(5): 600-605.
[1] | Cao Y C, Wei X L, Wu J X, et al. Development of ultra-supercritical power plant in china[C]//International Conference on Power Engineering.Hangzhou, China: [s.n.], 2007: 231-236. |
[2] | Chen Fei. Simulation of microstructure evolution during discontinuous hot forging processes using cellular automaton method [D]. Shanghai: School of Materials Science and Engineering, Shanghai Jiao Tong University,2012 (in Chinese). |
[3] | Chen R K, Gu J F, Han L Z, et al. Novel process to refine grain size of NiCrMoV steel [J]. Material Science Technology, 2012, 28(7): 773-778. |
[4] | ASTM E112-13, Standard test methods for determining average grain size [S]. |
[5] | Sakai T. Dynamic recrystallization microstructures under hot working conditions [J]. Journal of Materials Processing Technology, 1995, 53: 349-361. |
[6] | Shaban M, Eghbali B. Characterization of austenite dynamic recrystallization under different Z parameters in a microalloyed steel [J]. Journal of Materials Science & Technology, 2011, 27(4): 359-363. |
[7] | Kim S-II, Yoo Y C. Dynamic recrystallization behavior of AISI 304 stainless steel [J]. Materials Science and Engineering A, 2001, 311(1): 108-113. |
[8] | Muojekwu C A. Modeling of thermomechanical and metallurgical phenomena in steel strip during hot direct rolling and run out table cooling of thin-cast slabs[D]. Columbia: Department of metals and Materials engineering, the University of British Columbia, 1998. |
[9] | Sellars C M. Computer modelling of hot-working processes [J]. Materials Science and Technology, 1985,1: 325-331. |
[1] | Li Kai, Huang Wenhan, Li Chenchen, Deng Xiaotie. Exploiting a No-Regret Opponent in Repeated Zero-Sum Games [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(2): 385-398. |
[2] | ZHAN Heqing1 (詹何庆), HAN Guilai1 (韩贵来), WEI Chuan’an1 (魏传安), LI Zhiqun2* (李治群). Applications of Artificial Intelligence in Cardiac Electrophysiology and Clinical Diagnosis with Magnetic Resonance Imaging and Computational Modeling Techniques [J]. J Shanghai Jiaotong Univ Sci, 2025, 30(1): 53-65. |
[3] | XIAO Changsheng, ZHOU Xiaojun, ZHU Mixin. Maintenance Modeling of Remanufacturing Systems in Variable Working Condition with Coupling of Production Scheduling and Reliability [J]. Journal of Shanghai Jiao Tong University, 2024, 58(8): 1211-1220. |
[4] | HU Zhiqiang, LIU Mingfei, LI Qi, LI Xinyu, BAO Jinsong. Modeling of Multi-Modal Knowledge Graph for Assembly Process of Wind Turbines with Multi-Source Heterogeneous Data [J]. Journal of Shanghai Jiao Tong University, 2024, 58(8): 1249-1263. |
[5] | LI Zhenkun, YU Qiuyang, WEI Yanjun, TIAN Shuxin. Cost Modeling and Analysis of Integrated Energy Microgrid Group Participation in Frequency Regulation Auxiliary Service Market Based on CPSS [J]. Journal of Shanghai Jiao Tong University, 2024, 58(6): 893-903. |
[6] | WANG Weiping, CHEN Lu, WANG Junmin, LI Xiaobo, ZHU Zhi. Progress Review and Technical Conception on the Digital Mission Engineering Research for Kill-Chain System-of-Systems [J]. Air & Space Defense, 2024, 7(5): 8-17. |
[7] | HAN Yifan, CHEN Boyi, LIU Yanbin, CHEN Jinbao. Improved Active Disturbance Rejection Control for Multibody Folding Wing Under Variable Loads [J]. Journal of Shanghai Jiao Tong University, 2024, 58(11): 1762-1771. |
[8] | SU Yiyi, XU Qiping, LIU Jinyang. Theoretical Modeling, Simulation Analysis, and Experimental Investigation of a Pneumatic Toothed Soft Actuator [J]. Journal of Shanghai Jiao Tong University, 2023, 57(8): 1016-1027. |
[9] | WANG Hanyu, CHEN Zhen, ZHOU Di, CHEN Zhaoxiang, PAN Ershun. Nonlinear Degradation Modeling and Residual Life Prediction for Rollers Based on Kernel-based Wiener Process [J]. Journal of Shanghai Jiao Tong University, 2023, 57(8): 1037-1045. |
[10] | CHEN Peizhi1,2* (陈培芝), GUO Yifan1 (郭逸凡),WANG Dahan1,2 (王大寒), CHEN Chinling1,3,4* (陈金铃). Dlung: Unsupervised Few-Shot Diffeomorphic Respiratory Motion Modeling [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(4): 536-. |
[11] | HUA Penga (华鹏), SHU Xiongpenga (舒雄鹏),XIE Lea,b* (谢叻). Hysteresis Modeling and Compensation for Distal Shaft Deflection of Flexible Ureteroscope [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(4): 507-. |
[12] | HUANG Tong, GAO Qinhe, LIU Zhihao, WANG Dong. Driving Dynamic Characteristics of Multi-Axle Special Vehicles in Shortage of Tires [J]. Journal of Shanghai Jiao Tong University, 2023, 57(3): 335-344. |
[13] | WANG Bingheng, LI Wei, ZHANG Huan, MA Ping, CHENG Huichuan, ZHANG Jianchao, YANG Ming. Overview of Foreign Simulation VV&A Standards [J]. Air & Space Defense, 2023, 6(3): 13-24. |
[14] |
ZHANG Dapeng, YAN Jin, ZHAO Bowen, HOU Ling, ZHU Keqiang.
Application of Ship 3D-modeling based on NURBS surface [J]. Ocean Engineering Equipment and Technology, 2023, 10(3): 24-32. |
[15] | LI Yanbiao∗ (李研彪), CHEN Ke (陈 科), SUN Peng (孙 鹏), WANG Zesheng (王泽胜). Dynamic Modeling and Performance Evaluation of a Novel Humanoid Ankle Joint [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 570-578. |
Viewed | ||||||||||||||||||||||||||||||||||||||||||||||||||
Full text 194
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Abstract 571
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||