Identification of Steady State and Transient State

doi:10.1007/s12204-022-2516-4

Abstract

Abstract: Identification of steady state and transient state plays an important role in modeling, control, optimization, and fault detection of industrial processes. Many existing methods for state identification are not satisfactory in practical applications due to problems of ideal hypothesis, too many parameters, and poor robustness. In this paper, a novel state identification approach is proposed. The problem of state identification is transformed into finding the noise band of differential signal. For practical application, automatic selection of noise band amplitude is proposed to make the method convenient to be used. Problems of gross errors, low signal-to-noise ratio and online identification are considered. And comparison with other two methods shows that the proposed method has better identification performance. Simulations and experiments also prove the effectiveness and practicability of the proposed method.

Key words: state identification, steady state, transient state, noise band, differential signal

摘要： 稳态和瞬态识别在工业过程建模、控制、优化和故障检测中起着重要的作用。现有的许多状态识别方法存在假设理想、参数过多、鲁棒性差等问题，在实际应用中不能令人满意。本文提出了一种新的状态识别方法。将状态识别问题转化为求解差分信号噪声带。在实际应用中，提出了噪声带幅值的自动选择，使该方法易于使用。考虑了严重误差、低信噪比和在线识别等问题。并与其他两种方法进行了比较，结果表明该方法具有更好的识别性能。仿真和实验验证了该方法的有效性和实用性。

关键词: 状态识别，稳态，瞬态，噪声带，差分信号

CLC Number:

TP274

YU Sheng (于生), LI Xiangshun^∗ (李向舜). Identification of Steady State and Transient State[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 261-270.

References

[1] GUO W, PAN T H, LI Z M, et al. Modelling for multiphase batch processes using steady state identification and deep recurrent neural network [C]//2019 12th Asian Control Conference. Kitakyushu: IEEE, 2019: 1084-1089.
[2] TIAN Y, ZOU Q, HAN J. Data-driven fault diagnosis for automotive PEMFC systems based on the steadystate identification [J]. Energies, 2021, 14(7): 1918.
[3] LI J Z, GAO M, Lü Y, et al. Overview on the steadystate detection methods of process operating data [J]. Chinese Journal of Scientific Instrument, 2013, 34(8): 1739-1748 (in Chinese).
[4] NARASIMHAN S, MAH R S H, TAMHANE A C, et al. A composite statistical test for detecting changes of steady states [J]. AIChE Journal, 1986, 32(9): 1409-1418.
[5] NARASIMHAN S, KAO C S, MAH R S H. Detecting changes of steady states using the mathematical theory of evidence [J]. AIChE Journal, 1987, 33(11): 1930-1932.
[6] KIM M, YOON S H, DOMANSKI P A, et al. Design of a steady-state detector for fault detection and diagnosis of a residential air conditioner [J]. International Journal of Refrigeration, 2008, 31(5): 790-799.
[7] CAO S L, RHINEHART R R. An efficient method for on-line identification of steady state [J]. Journal of Process Control, 1995, 5(6): 363-374.
[8] CAO S L, RHINEHART R R. Critical values for a steady-state identifier [J]. Journal of Process Control, 1997, 7(2): 149-152.
[9] SHROWTI N A, VILANKAR K P, RHINEHART R R. Type-II critical values for a steady-state identifier [J]. Journal of Process Control, 2010, 20(7): 885-890.
[10] BHAT S A, SARAF D N. Steady-state identification, gross error detection, and data reconciliation for industrial process units [J]. Industrial & Engineering Chemistry Research, 2004, 43(15): 4323-4336.
[11] RHINEHART R R. Automated steady and transient state identification in noisy processes [C]//2013 American Control Conference. Washington: IEEE, 2013: 4477-4493.
[12] JIANG T W, CHEN B Z, HE X R, et al. Application of steady-state detection method based on wavelet transform [J]. Computers & Chemical Engineering, 2003, 27(4): 569-578.
[13] KORBEL M, BELLEC S, JIANG T W, et al. Steady state identification for on-line data reconciliation based on wavelet transform and filtering [J]. Computers & Chemical Engineering, 2014, 63: 206-218.
[14] FLEHMIG F, MARQUARDT W. Detection of multivariable trends in measured process quantities [J]. Journal of Process Control, 2006, 16(9): 947-957.
[15] LE ROUX G A C, SANTORO B F, SOTELO F F, et al. Improving steady-state identification [J]. Computer Aided Chemical Engineering, 2008, 25: 459-464.
[16] TAO L L, LI C C, KONG X D, et al. Steady-state identification with gross errors for industrial process units [C]//10th World Congress on Intelligent Control and Automation. Beijing: IEEE, 2012: 4151-4154.
[17] RINCON F D, LIMA F V, LE ROUX G A C. An ARX-based technique for steady-state identification of chemical processes [C]//2015 American Control Conference. Chicago: IEEE, 2015: 1113-1118.
[18] YAO Y, ZHAO C H, GAO F R. Batch-to-batch steady state identification based on variable correlation and mahalanobis distance [J]. Industrial & Engineering Chemistry Research, 2009, 48(24): 11060-11070.
[19] DALHEIM ? ?, STEEN S. A computationally efficient method for identification of steady state in time series data from ship monitoring [J]. Journal of Ocean Engineering and Science, 2020, 5(4): 333-345.
[20] CAO P F, WANG J D, ZHANG C. Steady-state interval detection and nonlinear modeling for automatic generation control systems [J]. IEEE Access, 2019, 7: 139592-139600.
[21] WU J G, XU H L, ZHANG C, et al. A sequential Bayesian partitioning approach for online steady-state detection of multivariate systems [J]. IEEE Transactions on Automation Science and Engineering, 2019, 16(4): 1882-1895.
[22] LIU X M. Configuration, programming, implementation, and evaluation of distributed control system for a process simulator [D]. Ontario: The University of Western Ontario, 2015.