Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures

doi:10.1007/s12204-021-2291-7

J Shanghai Jiaotong Univ Sci ›› 2021, Vol. 26 ›› Issue (3): 259-266.doi: 10.1007/s12204-021-2291-7

Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures

CHENG Rongshan1,2 (程荣山), JIANG Ziang1,2 (蒋子昂), DIMITRIOU Dimitris3, GONG Weihua1,2 (龚伟华), TSAI Tsung-Yuan1,2 (蔡宗远)

(1. School of Biomedical Engineering & Med-X Research Institute, Shanghai Jiao Tong University, Shanghai 200030,
China; 2. Department of Orthopaedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University
School of Medicine, Shanghai 200011, China; 3. Department of Orthopedics, B¨urgerspital Solothurn,
Sch¨ongr¨unstrasse 42, CH-4500 Solothurn, Switzerland)

出版日期:2021-06-28 发布日期:2021-06-02
通讯作者: GONG Weihua(龚伟华), TSAI Tsung-Yuan (蔡宗远) E-mail:gwh1124@sina.com, tytsai@sjtu.edu.cn
基金资助:
the National Natural Science Foundation
of China (Nos. 81772425, 31771017, and 31972924),
the Project of Science and Technology Commission
of Shanghai Municipality (No. 16441908700), the Innovation
Research Plan of Shanghai Municipal Education
Commission (No. ZXWF082101), the National
Key Research and Development Program of
China (Nos. 2017YFC0110700, and 2019YFC0120600),
and the Interdisciplinary Program of Shanghai Jiao
Tong University (Nos. YG2016MS11, JYYQ201516,
YG2017MS09, and ZH2018QNA06)

Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures

CHENG Rongshan1,2 (程荣山), JIANG Ziang1,2 (蒋子昂), DIMITRIOU Dimitris3, GONG Weihua1,2 (龚伟华), TSAI Tsung-Yuan1,2 (蔡宗远)

(1. School of Biomedical Engineering & Med-X Research Institute, Shanghai Jiao Tong University, Shanghai 200030,
China; 2. Department of Orthopaedic Surgery, Shanghai Ninth People’s Hospital, Shanghai Jiao Tong University
School of Medicine, Shanghai 200011, China; 3. Department of Orthopedics, B¨urgerspital Solothurn,
Sch¨ongr¨unstrasse 42, CH-4500 Solothurn, Switzerland)

Online:2021-06-28 Published:2021-06-02
Contact: GONG Weihua(龚伟华), TSAI Tsung-Yuan (蔡宗远) E-mail:gwh1124@sina.com, tytsai@sjtu.edu.cn
Supported by:
the National Natural Science Foundation
of China (Nos. 81772425, 31771017, and 31972924),
the Project of Science and Technology Commission
of Shanghai Municipality (No. 16441908700), the Innovation
Research Plan of Shanghai Municipal Education
Commission (No. ZXWF082101), the National
Key Research and Development Program of
China (Nos. 2017YFC0110700, and 2019YFC0120600),
and the Interdisciplinary Program of Shanghai Jiao
Tong University (Nos. YG2016MS11, JYYQ201516,
YG2017MS09, and ZH2018QNA06)

摘要/Abstract

摘要： This study was aimed at comparing the biomechanical performance of personalised 3D-printed clavicle plates of different materials to treat midshaft clavicle fractures with the finite element (FE) method. The FE model of a fractured clavicle with a personalised 3D-printed clavicle plate and screws was constructed. Three types of materials were simulated, including stainless steel, titanium alloy, and magnesium alloy. Two loading conditions (axial compression and inferior bending) were applied at the distal end of the clavicle to simulate arm abduction. Plate stiffness, peak stress, and bone strain at the clavicle fracture site were measured and compared. The stiffness of the stainless steel clavicle plate was significantly greater than that of the titanium alloy clavicle plate. The stiffness of the magnesium alloy clavicle plate was similar to that of the intact clavicle; peak stress of the magnesium alloy clavicle plate was the lowest; thus, it had less stress-shielding effects on bone formation. The magnesium alloy clavicle plate was more likely to form bone by distributing proper strain at the clavicle fracture site. According to the influence of different materials on the tensile strength, magnesium alloy clavicle plates might be preferred owing to their bionic stiffness in the treatment of patients with a low risk of falling. For patients who engage in contact sports, a titanium alloy clavicle plate might be more suitable.

Abstract: This study was aimed at comparing the biomechanical performance of personalised 3D-printed clavicle plates of different materials to treat midshaft clavicle fractures with the finite element (FE) method. The FE model of a fractured clavicle with a personalised 3D-printed clavicle plate and screws was constructed. Three types of materials were simulated, including stainless steel, titanium alloy, and magnesium alloy. Two loading conditions (axial compression and inferior bending) were applied at the distal end of the clavicle to simulate arm abduction. Plate stiffness, peak stress, and bone strain at the clavicle fracture site were measured and compared. The stiffness of the stainless steel clavicle plate was significantly greater than that of the titanium alloy clavicle plate. The stiffness of the magnesium alloy clavicle plate was similar to that of the intact clavicle; peak stress of the magnesium alloy clavicle plate was the lowest; thus, it had less stress-shielding effects on bone formation. The magnesium alloy clavicle plate was more likely to form bone by distributing proper strain at the clavicle fracture site. According to the influence of different materials on the tensile strength, magnesium alloy clavicle plates might be preferred owing to their bionic stiffness in the treatment of patients with a low risk of falling. For patients who engage in contact sports, a titanium alloy clavicle plate might be more suitable.

中图分类号:

R 318.01

CHENG Rongshan, (程荣山), JIANG Ziang, (蒋子昂), DIMITRIOU Dimitris, GONG Weihua, (龚伟华), TSAI Tsung-Yuan, (蔡宗远). Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 259-266.

参考文献 30

[1]	KHAN L A K, BRADNOCK T J, SCOTT C, et al. Fractures of
	the clavicle [J]. The Journal of Bone and Joint Surgery -American Volume, 2009,
91	(2): 447- 460.
[2]	NOWAK J, MALLMIN H, LARSSON S. The aetiology and
	epidemiology of clavicular fractures: A prospective study during a two-year
	period in Uppsala, Sweden [J]. Injury, 2000, 31(5): 353-358.
[3]	VANDER HAVE K L, PERDUE A M, CAIRD M S, et al. Operative
	versus nonoperative treatment of midshaft clavicle fractures in adolescents
[J]	Journal of Pediatric Orthopedics, 2010, 30(4): 307-312.
[4]	Canadian Orthopaedic Trauma Society. Nonoperative treatment
	compared with plate fixation of displaced midshaft clavicular fractures [J].
	The Journal of Bone & Joint Surgery, 2007, 89(1): 1-10.
[5]	KULSHRESTHA V, ROY T, AUDIGE L. Operative versus
	nonoperative management of displaced midshaft clavicle fractures: A prospective
	cohort study [J]. Journal of Orthopaedic Trauma, 2011, 25(1): 31-38.
[6]	MIRZATOLOOEI F. Comparison between operative and
	nonoperative treatment methods in the management of comminuted fractures of the
	clavicle [J]. Acta Orthopaedica et Traumatologica Turcica, 2011, 45(1): 34-40.
[7]	NI M, NIU W X, WONG D W C, et al. Finite element analysis
	of locking plate and two types of intramedullary nails for treating mid-shaft
	clavicle fractures [J]. Injury, 2016, 47(8): 1618-1623.
[8]	ZLOWODZKI M, ZELLE B A, COLE P A, et al. Treatment of
	acute midshaft clavicle fractures: Systematic review of 2 144 fractures: On
	behalf of the Evidence-Based Orthopaedic Trauma Working Group [J]. Journal of
	Orthopaedic Trauma, 2005, 19(7): 504- 507.
[9]	PENGRUNG N, LAKDEE N, PUNCREOBUTR C, et al. Finite
	element analysis comparison between superior clavicle locking plate with and
	without screw holes above fracture zone in midshaft clavicular fracture [J]. BMC
	Musculoskeletal Disorders, 2019, 20(1): 465.
[10]	NIINOMI M, NAKAI M. Titanium-based biomaterials for
	preventing stress shielding between implant devices and bone [J]. International
	Journal of Biomaterials, 2011, 2011: 836587.
[11]	GARDNER M J, EVANS J M, DUNBAR R P. Failure of fracture
	plate fixation [J]. The Journal of the American Academy of Orthopaedic
	Surgeons, 2009, 17(10): 647-657.
[12]	LAU T W, LEUNG F, CHAN C F, et al. Wound complication of
	minimally invasive plate osteosynthesis in distal tibia fractures [J].
	International Orthopaedics, 2007, 32(5): 697-703. [13] HAASE K, ROUHI G. A
	discussion on plating factors that affect stress shielding using finite element
	analysis [J]. Journal of Biomechanical Science and Engineering, 2010, 5(2):
12	9-141.
[14]	LI J L, QIN L, YANG K, et al. Materials evolution of bone
	plates for internal fixation of bone fractures: A review [J]. Journal of
	Materials Science & Technology, 2020, 36: 190-208. [15] STAIGER M P, PIETAK
	A M, HUADMAI J, et al. Magnesium and its alloys as orthopedic biomaterials: A
	review [J]. Biomaterials, 2006, 27(9): 1728-1734.
[16]	FANG R X, JI A M, ZHAO Z H, et al. A regression
	orthogonal biomechanical analysis of internal fixation for femoral shaft
	fracture [J]. Biocybernetics and Biomedical Engineering, 2020, 40(3):
12	77-1290.
[17]	LIU P C, YANG Y J, LIU R, et al. A study on the
	mechanical characteristics of the EBM-printed Ti-6Al-4V LCP plates in vitro
[J]	Journal of Orthopaedic Surgery and Research, 2014, 9(1): 106.
[18]	ZENG L Q, WEI H F, LIU Y J, et al. Titanium elastic nail
(TEN)	versus reconstruction plate repair of midshaft clavicular fractures: A
	finite element study [J]. PLoS One, 2015, 10(5): e0126131.
[19]	ˇSEˇSOK A, VAITIEK¯UNAS M. Modelling of bone fixation plate
	from biodegradable magnesium alloy [J]. Mokslas - Lietuvos Ateitis/Science
	-Future of Lithuania, 2019, 11: mla.2019.7092
[20]	FAVRE P, KLOEN P, HELFET D L, et al. Superior versus
	anteroinferior plating of the clavicle: A finite element study [J]. Journal of
	Orthopaedic Trauma, 2011, 25(11): 661-665. [21] RHO J Y, HOBATHO M C, ASHMAN R
	B. Relations of mechanical properties to density and CT numbers in human bone
[J]	Medical Engineering & Physics, 1995, 17(5): 347-355. [22] DROSDOWECH D
	S, MANWELL S E, FERREIRA L M, et al. Biomechanical analysis of fixation of
	middle third fractures of the clavicle [J]. Journal of Orthopaedic Trauma,
20	11, 25(1): 39-43.
[23]	CRONSK¨AR M, RASMUSSEN J, TINNSTEN M. Combined finite
	element and multibody musculoskeletal investigation of a fractured clavicle
	with reconstruction plate [J]. Computer Methods in Biomechanics and Biomedical
	Engineering, 2015, 18(7): 740-748.
[24]	TOKSVIG-LARSEN S, RYD L. Surface characteristics following
	tibial preparation during total knee arthroplasty [J]. The Journal of
	Arthroplasty, 1994, 9(1): 63-66.
[25]	CHIU Y C, HUANG K C, SHIH C M, et al. Comparison of
	implant failure rates of different plates for midshaft clavicular fractures
	based on fracture classifications [J]. Journal of Orthopaedic Surgery and
	Research, 2019, 14(1): 220.
[26]	ZHANG X J, CHENG X D, YIN B, et al. Finite element analysis
	of spiral plate and Herbert screw fixation for treatment of midshaft clavicle
	fractures [J]. Medicine, 2019, 98(34): e16898. [27] WILSON D J, WEAVER D L,
	BALOG T P, et al. Early postoperative failure of a new intramedullary fixation
	device for midshaft clavicle fractures [J]. Orthopedics, 2013, 36(11):
	e1450-e1453.
[28]	CHEN J H, LIU C, YOU L D, et al. Boning up on Wolff’s
	Law: Mechanical regulation of the cells that make and maintain bone [J].
	Journal of Biomechanics, 2010, 43(1): 108-118.
[29]	WU Z Y, LIU Y P, SINGARE S, et al. Animal model for
	evaluation of strain gauge in mandibular distraction osteogenesis in rabbits
[J]	British Journal of Oral and Maxillofacial Surgery, 2007, 45(8): 633-636.
[30]	ZHANG F X, CHEN F C, QI Y H, et al. Finite
	element analysis of dual small plate fixation and single plate fixation for
	treatment of midshaft clavicle fractures [J]. Journal of Orthopaedic Surgery
	and Research, 2020, 15(1): 148.

Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures

Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 30

相关文章 4

编辑推荐

Metrics

本文评价

[1]	FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗). Effects of Mandibular Extractions with Clear Aligners: A Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382.
[2]	PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远). Effect of Attachment on Movement Control of the Central Incisor Using Invisible Orthodontics: In-Silico Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390.
[3]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[4]	LUO Mai-sheng1 (罗买生), XIE Hong-zhi2 (谢洪智), XIE Le3 (谢叻),CAI Ping4 (蔡萍), GU Li-xu. Robust and Real-Time Guidewire Simulation Based on Kirchhoff Elastic Rod for Vascular Intervention Training[J]. 上海交通大学学报（英文版）, 2014, 19(5): 624-629.