sa ›› 2018, Vol. 23 ›› Issue (1): 61-65.doi: 10.1007/s12204-018-1910-4
The Analysis of Angle Resolution of Stress Vector Sensor Based on Optical Fiber Sensing Cable for High Speed Railway Traffic
DENG Shungea (邓顺戈), MA Xina (马鑫), LI Xinwana,b,c* (李新碗)
- (a. State Key Laboratory of Advanced Optical Communication Systems and Networks; b. University of Michigan - Shanghai Jiao Tong University Joint Institute; c. Shanghai Institute for Advanced Communication and Data Science, Shanghai Jiao Tong University, Shanghai 200240, China)
-
出版日期:2018-02-01发布日期:2018-02-01 -
通讯作者:LI Xinwan (李新碗) E-mail:lixinwan@sjtu.edu.cn
The Analysis of Angle Resolution of Stress Vector Sensor Based on Optical Fiber Sensing Cable for High Speed Railway Traffic
DENG Shungea (邓顺戈), MA Xina (马鑫), LI Xinwana,b,c* (李新碗)
- (a. State Key Laboratory of Advanced Optical Communication Systems and Networks; b. University of Michigan - Shanghai Jiao Tong University Joint Institute; c. Shanghai Institute for Advanced Communication and Data Science, Shanghai Jiao Tong University, Shanghai 200240, China)
-
Online:2018-02-01Published:2018-02-01 -
Contact:LI Xinwan (李新碗) E-mail:lixinwan@sjtu.edu.cn
摘要： With the development of high speed railway traffic, the structure health monitoring for high-speed rail is necessary due to the safety issue. Optical fiber sensing technology is one of the options to solve it. Stress vector information is the important index to make more reasonable judgments about railway safety. However, information sensed by lots of commercial optical sensors is scalar. According to the stress filed distribution of rail, this paper proposes a new type of stress vector sensor based on optical fiber sensing cable (OFSC) with a symmetrical seven optical fibers structure and analyzes the relations between angle resolution and distance between adjacent of optical fibers through finite-element software (ANSYS) simulation. Through reasonable distance configuration, the angle resolution of the OFSC can be improved, and thus stress vector information, including the stress magnitude and the angle of stress, can be more accurately obtained. The simulation results are helpful to configure OFSC for angle resolution improvement in actual practice, and increase the safety factor in high speed railway structure health monitoring.
中图分类号:
引用本文
DENG Shungea (邓顺戈), MA Xina (马鑫), LI Xinwana,b,c* (李新碗). The Analysis of Angle Resolution of Stress Vector Sensor Based on Optical Fiber Sensing Cable for High Speed Railway Traffic[J]. sa, 2018, 23(1): 61-65.
DENG Shungea (邓顺戈), MA Xina (马鑫), LI Xinwana,b,c* (李新碗). The Analysis of Angle Resolution of Stress Vector Sensor Based on Optical Fiber Sensing Cable for High Speed Railway Traffic[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(1): 61-65.
使用本文
| [1] HOU J F, PEI L, LI Z X, et al. Research progressand application of optical fiber sensing technology [J].Electro-Optic Technology Application, 2012, 27(1): 49-53 (in Chinese). [2] PAN J J. Research on applying optical fiber gratingin track monitoring [D]. Wuhan: Wuhan University ofTechnology, 2009 (in Chinese). [3] TAM H Y. World’s first city-wide fiber Bragg gratingsensing network for railway monitoring [C]//OpticalFibre Technology, 2014 OptoElectronics and CommunicationConference and Australian Conference onMelbourne. IEEE, 2014: 1056-1057. [4] ZHANG X P, GAO C, WANG F, et al. Stress transferperformance of strain sensing cable [J]. Optics and PrecisionEngineering, 2011, 19(12): 2891-2899 (in Chinese). [5] ZHANG W, WU R R, TAN W. Icing load monitoringof OPGW based on strain analysis [J]. Southern PowerSystem Technology, 2016, 10(11): 52-58 (in Chinese). [6] GUNDAY A, KARLIK S E. Optical fiber distributedsensing of temperature, thermal strain and thermomechanicalforce formations on OPGW cables underwind effects [C]//International Conference on Electricaland Electronics Engineering. Bursa: IEEE, 2013:462-467. [7] LANTICQ V, BOURGEOIS E, MAGNIEN P, et al.Soil-embedded optical fiber sensing cable interrogatedby Brillouin optical time-domain reflectometry (BOTDR)and optical frequency-domain reflectometry(OFDR) for embedded cavity detection and sinkholewarning system [J]. Measurement Science and Technology,2009, 20(3): 034018. [8] THODI P, PAULIN M, FORSTER L, et al. Arcticpipeline leak detection using fiber optic cable distributedsensing systems [C]//OTC Arctic TechnologyConference. Houston: Offshore Technology Conference,2014: 1-16. [9] NONG H, LIN J. Study on rail load measurement baseon finite element analysis [C]//2009 9th InternationalConference on Electronic Measurement & Instruments.Beijing: IEEE, 2009: 1708-1713. [10] YANG J, LIU Z H, PEI Y P, et al. Theoretical andexperimental study on double-coated fiber optic strainsensor [J]. Acta Photonica Sinica, 2006, 35(6): 842-845(in Chinese). [11] OZ Optics. Fiber optic distributed strain andtemperature sensors (DSTS) BOTDA+BOTDRcombo module [EB/OL]. (2017-05-02). [2018.01.19].http://www.ozoptics.com/ALLNEW PDF/DTS0139.pdf. |
| [1] | PAN Shengxuan (潘晟轩), ZOU Diyang (邹第洋), PAN Xiaogang(潘晓岗), TSAI Tsung-Yuan (蔡宗远). Effect of Attachment on Movement Control of the Central Incisor Using Invisible Orthodontics: In-Silico Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 383-390. |
| [2] | FENG Qiping (冯齐平), CHU Fengting (储沨婷), CHEN Rongjing (陈荣敬), PAN Xiaogang (潘晓岗). Effects of Mandibular Extractions with Clear Aligners: A Finite Element Analysis[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 377-382. |
| [3] | SHEN Naian (沈乃安), ZHANG Yue (张玥), WANG Jinye (王瑾晔). Parallel Plate Flow Chamber Device for Evaluation of Cell Retention of Electrospun Zein Fiber Film Under Steady Shear[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 69-75. |
| [4] | WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713. |
| [5] | YU Zelin, SUN Pengwen, WANG Dong. Fatigue Life Prediction for Flange Connecting Bolts of Wind Turbine Tower[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 526-530. |
| [6] | LI Jingpei, CAO Xiaobing, LI Lin. Supporting Earth Pressures for Foundation Excavation Considering Suction Stress of Soil[J]. Journal of Shanghai Jiao Tong University(Science), 2020, 25(4): 486-494. |
| [7] | ZHOU Min, GAO Mingze, LI Chuang, WANG Liancheng. Cargo Hold Structure Optimization of Small and Medium-Sized Duplex Stainless Steel Chemical Tankers[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 340-351. |
| [8] | ZHAO Yong, JI Xiaojun, DAI Ming, QI Hongli, GAO Junkai. Analysis of Transmission Power and Efficiency of Side-Mounted Inductive Power Supply System for Metal Rotary Shafts[J]. Journal of Shanghai Jiaotong University(Science), 2020, 25(3): 273-280. |
| [9] | LI Bin (李斌), WANG Xiuli (王秀丽), LIU Jianhui (刘俭辉), LANG Shanshan (郎珊珊). Correction Method for Calculating Critical Plane Position of Geometric Discontinuity Steel Structure Under Multiaxial Loading[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(6): 799-804. |
| [10] | WANG Man (王曼), ZHANG Xiaomin (张晓敏), LONG Peng (龙鹏), JIANG Yu (蒋渝). Torsion Failure Analysis of Galvanized Steel Wires for Transmission and Distribution Lines Based on ANSYS Numerical Simulation[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 632-639. |
| [11] | LI Yonghua (李永华), ZHANG Xiaodan (张晓丹), ZHI Pengpeng (智鹏鹏). Robust Optimization Design of Metro Handrails[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(5): 628-631. |
| [12] | CEN Haitang (岑海堂), TIAN Wenliang* (田文良), LI Peiwen (李沛文), WEI Ruitao (魏瑞涛). Simulation Analysis on Polyurethane Coating of Wind Blade[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 496-499. |
| [13] | LI Shuxun *(李树勋), ZHU Lu (朱禄), WANG Weibo (王伟波), XIAO Kuijun (肖奎军), XU Xiaogang . Analysis of Thermal-Fluid-Structure Coupling and Resonance Forecast for Link Butterfly Valve Under Small Opening[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 341-350. |
| [14] | ZHANG Shuo (张硕), LIAO Chencong* (廖晨聪), ZHANG Qi (张琪), ZHEN Liang (甄亮). Elastoplastic Model for Soils Considering Structure and Overconsolidation[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 196-203. |
| [15] | ZHAI Jiaqi (翟佳琦), DUAN Yaozong (段耀宗), HAN Dong (韩东). Pressure-Based Approach to Estimating the Injection Start and End in Single and Split Common Rail Injection Processes[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(Sup. 1): 28-33. |
| 阅读次数 | ||||||
|
全文 |
|
|||||
|
摘要 |
|
|||||