Journal of Shanghai Jiao Tong University (Science) ›› 2018, Vol. 23 ›› Issue (Sup. 1): 28-33.doi: 10.1007/s12204-018-2019-5

• • 上一篇    下一篇

Pressure-Based Approach to Estimating the Injection Start and End in Single and Split Common Rail Injection Processes

ZHAI Jiaqi (翟佳琦), DUAN Yaozong (段耀宗), HAN Dong (韩东)   

  1. (Key Laboratory for Power Machinery and Engineering of Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, China)
  • 发布日期:2018-12-26
  • 通讯作者: HAN Dong (韩东) E-mail:dong han@sjtu.edu.cn

Pressure-Based Approach to Estimating the Injection Start and End in Single and Split Common Rail Injection Processes

ZHAI Jiaqi (翟佳琦), DUAN Yaozong (段耀宗), HAN Dong (韩东)   

  1. (Key Laboratory for Power Machinery and Engineering of Ministry of Education, Shanghai Jiao Tong University, Shanghai 200240, China)
  • Published:2018-12-26
  • Contact: HAN Dong (韩东) E-mail:dong han@sjtu.edu.cn

摘要: Fuel injection timing is an important control parameter for engine combustion optimization and emissions control. However, the actual fuel injection timing is different from the nominal one commanded by the electronic control unit, due to the system hydraulic lag or the possible communication malfunction. In this study, a simple estimate approach based on the injector inlet pressure is proposed to capture four critical characteristic instants at the start and end of injection. The critical characteristic moments estimated using this pressure-based approach are validated against those determined by the actual injection rate profiles, in the context of different single or split injection processes. The comparison revealed that the characteristic injection moments estimated by the injector inlet pressures and those determined by the actual injection rate profiles have a satisfactory agreement, certifying the broad applicability and reliability of this pressure-based approach in the detection of the real fuel injection start and end time.

关键词: injector inlet pressure , common rail injection system, injection diagnostics, single injection, split injection

Abstract: Fuel injection timing is an important control parameter for engine combustion optimization and emissions control. However, the actual fuel injection timing is different from the nominal one commanded by the electronic control unit, due to the system hydraulic lag or the possible communication malfunction. In this study, a simple estimate approach based on the injector inlet pressure is proposed to capture four critical characteristic instants at the start and end of injection. The critical characteristic moments estimated using this pressure-based approach are validated against those determined by the actual injection rate profiles, in the context of different single or split injection processes. The comparison revealed that the characteristic injection moments estimated by the injector inlet pressures and those determined by the actual injection rate profiles have a satisfactory agreement, certifying the broad applicability and reliability of this pressure-based approach in the detection of the real fuel injection start and end time.

Key words: injector inlet pressure , common rail injection system, injection diagnostics, single injection, split injection

中图分类号: