A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process

doi:10.1007/s12204-016-1708-1

上海交通大学学报（英文版） ›› 2016, Vol. 21 ›› Issue (2): 164-172.doi: 10.1007/s12204-016-1708-1

A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process

LIU Yinhua1* (刘银华), YE Xialiang1 (叶夏亮), JIN Sun2 (金隼)

(1. School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China; 2. State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

出版日期:2016-04-15 发布日期:2016-04-26
通讯作者: LIU Yinhua (刘银华) E-mail:liuyinhua@usst.edu.cn

A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process

LIU Yinhua1* (刘银华), YE Xialiang1 (叶夏亮), JIN Sun2 (金隼)

(1. School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China; 2. State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Online:2016-04-15 Published:2016-04-26
Contact: LIU Yinhua (刘银华) E-mail:liuyinhua@usst.edu.cn

摘要/Abstract

摘要： The auto body process monitoring and the root cause diagnosis based on data-driven approaches are vital ways to improve the dimension quality of sheet metal assemblies. However, during the launch time of the process mass production with an off-line measurement strategy, the traditional statistical methods are difficult to perform process control effectively. Based on the powerful abilities in information fusion, a systematic Bayesian based quality control approach is presented to solve the quality problems in condition of incomplete dataset. For the process monitoring, a Bayesian estimation method is used to give out-of-control signals in the process. With the abnormal evidence, the Bayesian network (BN) approach is employed to identify the fixture root causes. A novel BN structure and the conditional probability training methods based on process knowledge representation are proposed to obtain the diagnostic model. Furthermore, based on the diagnostic performance analysis, a case study is used to evaluate the effectiveness of the proposed approach. Results show that the Bayesian based method has a better diagnostic performance for multi-fault cases.

关键词: dimension quality, Bayesian method, process knowledge, fault diagnosis

Abstract: The auto body process monitoring and the root cause diagnosis based on data-driven approaches are vital ways to improve the dimension quality of sheet metal assemblies. However, during the launch time of the process mass production with an off-line measurement strategy, the traditional statistical methods are difficult to perform process control effectively. Based on the powerful abilities in information fusion, a systematic Bayesian based quality control approach is presented to solve the quality problems in condition of incomplete dataset. For the process monitoring, a Bayesian estimation method is used to give out-of-control signals in the process. With the abnormal evidence, the Bayesian network (BN) approach is employed to identify the fixture root causes. A novel BN structure and the conditional probability training methods based on process knowledge representation are proposed to obtain the diagnostic model. Furthermore, based on the diagnostic performance analysis, a case study is used to evaluate the effectiveness of the proposed approach. Results show that the Bayesian based method has a better diagnostic performance for multi-fault cases.

Key words: dimension quality, Bayesian method, process knowledge, fault diagnosis

中图分类号:

TH 161

LIU Yinhua1* (刘银华), YE Xialiang1 (叶夏亮), JIN Sun2 (金隼). A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process[J]. 上海交通大学学报（英文版）, 2016, 21(2): 164-172.

LIU Yinhua1* (刘银华), YE Xialiang1 (叶夏亮), JIN Sun2 (金隼). A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process[J]. Journal of shanghai Jiaotong University (Science), 2016, 21(2): 164-172.

参考文献 12

[1]	CEGLAREK D, SHI J. Fixture failure diagnosis for autobody assembly using pattern recognition [J]. Journal of Engineering for Industry, 1996, 118(1): 55-66.
[2]	LIU Y G, HU S J. Assembly fixture fault diagnosis using designated component analysis [J]. Journal of Manufacturing Science and Engineering, 2005, 127(2):358-368.
[3]	DU S, L¨U J, XI L. A robust approach for root causes identification in machining processes using hybrid learning algorithm and engineering knowledge[J]. Journal of Intelligent Manufacturing, 2012, 23(5):1833-1841.
[4]	APLEY D W, SHI J. Diagnosis of multiple fixture faults in panel assembly [J]. Journal of Manufacturing Science and Engineering, 1998, 120(4): 793-801.
[5]	LIU S C, HU S J. Variation simulation for deformable sheet metal assemblies using finite element methods[J]. Journal of Manufacturing Science and Engineering,1997, 119(3): 368-374.
[6]	CAMELIO J A, HU S J, YIM H. Sensor placement for effective diagnosis of multiple faults in fixturing of compliant parts [J]. Journal of Manufacturing Science and Engineering, 2005, 127(1): 68-74.
[7]	YU K G, JIN S, LAI X M. Fixture variation diagnosis of compliant assembly using sensitivity matrix[J]. Journal of Shanghai Jiaotong University (Science),2009, 14(6): 707-712.
[8]	DING Y, CEGLAREK D, SHI J. Fault diagnosis of multistage manufacturing processes by using state space approach [J]. Journal of Manufacturing Science and Engineering, 2002, 124(2): 313-322.
[9]	ZHOU S, CHEN Y, SHI J. Statistical estimation and testing for variation root-cause determination of multistage manufacturing processes [J]. IEEE Transactions on Automation Science and Engineering, 2004, 1(1):73-83.
[10]	DEY S, SRORI J A. A Bayesian network approach to root cause diagnosis of process variations [J]. International Journal of Machine Tools & Manufacture, 2005,45(1): 75-91.
[11]	JIN S, LIU Y, LIN Z. A Bayesian network approach for fixture fault diagnosis in launch of the assembly process[J]. International Journal of Production Research,2012, 50(23): 6655-6666.
[12]	LAURITZEN S L. The EM algorithm for graphical association models with missing data [J]. Computational Statistics & Data Analysis, 1995, 19(2): 191-201.

A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process

A Bayesian Based Process Monitoring and Fixture Fault Diagnosis Approach in the Auto Body Assembly Process

可视化

摘要/Abstract

引用本文

使用本文

参考文献 12

相关文章 9

编辑推荐

Metrics

本文评价

[1]	YU Kun (俞昆), TAN Jiwen (谭继文), LIN Tianran (林天然). Fault Diagnosis of Rolling Element Bearing Using Multi-Scale Lempel-Ziv Complexity and Mahalanobis Distance Criterion[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(5): 696-701.
[2]	DENG Shijie (邓士杰), TANG Liwei (唐力伟), ZHANG Xiaotao (张晓涛). Research of Adaptive Neighborhood Incremental Principal Component Analysis and Locality Preserving Projection Manifold Learning Algorithm[J]. sa, 2018, 23(2): 269-275.
[3]	WU Bin1* (吴斌), XI Lifeng2 (奚立峰), FAN Sixia1 (范思遐), ZHAN Jian1 (占健). Fault Diagnosis for Wind Turbine Based on Improved Extreme Learning Machine[J]. 上海交通大学学报（英文版）, 2017, 22(4): 466-473.
[4]	ZHANG Wei1* (张伟), HOU Yue-min1,2 (侯悦民). Systematic Safety Analysis Method for Power Generating Equipment[J]. 上海交通大学学报（英文版）, 2015, 20(4): 508-512.
[5]	SHANG Qun-li1 (尚群立), ZHANG Zhen2 (张镇), XU Xiao-bin2* (徐晓滨). Dynamic Fault Diagnosis Using the Improved Linear Evidence Updating Strategy[J]. 上海交通大学学报（英文版）, 2015, 20(4): 427-436.
[6]	REN Fang-yu (任方宇), SI Shu-bin* (司书宾), CAI Zhi-qiang (蔡志强), ZHANG Shuai (张帅). Transformer Fault Analysis Based on Bayesian Networks and Importance Measures[J]. 上海交通大学学报（英文版）, 2015, 20(3): 353-357.
[7]	BAO Yong-lin (鲍泳林). Primary Research on Real-Time Fault Diagnosis Platform for Fuel Tank System of an Aircraft[J]. 上海交通大学学报（英文版）, 2015, 20(3): 358-362.
[8]	BAI Lu* (白璐), DU Cheng-lie (杜承烈), GUO Yang-ming (郭阳明). A Fuzzy Fault Diagnosis Method for Large Radar Based on Directed Graph Model[J]. 上海交通大学学报（英文版）, 2015, 20(3): 363-369.
[9]	WEN Cheng-yu* (文成玉), DONG Liang (董良), JIN Xin (金欣). Feature Extraction of Bearing Vibration Signals Using Second Generation Wavelet and Spline-Based Local Mean Decomposition[J]. 上海交通大学学报（英文版）, 2015, 20(1): 56-60.