上海交通大学学报（英文版） ›› 2013, Vol. 18 ›› Issue (4): 474-478.doi: 10.1007/s12204-013-1423-0

• • 上一篇    下一篇

Regression Analysis of Initial Stress Field Around Faults Based on Fault Throw by Displacement Discontinuity Method

LI Ke1,2* (李 科), WANG Ying-yi3 (王颖轶), HUANG Xing-chun2,3 (黄醒春)   

  1. (1. China Merchants Chongqing Communications Research & Design Institute Co., Ltd., Chongqing 400067, China; 2. School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 3. Chinese Underwater Technology Institute, Shanghai Jiaotong University, Shanghai 200231, China)
  • 出版日期:2013-08-28 发布日期:2013-08-12
  • 通讯作者: LI Ke(李 科) E-mail:nick.88@163.com

Regression Analysis of Initial Stress Field Around Faults Based on Fault Throw by Displacement Discontinuity Method

LI Ke1,2* (李 科), WANG Ying-yi3 (王颖轶), HUANG Xing-chun2,3 (黄醒春)   

  1. (1. China Merchants Chongqing Communications Research & Design Institute Co., Ltd., Chongqing 400067, China; 2. School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 3. Chinese Underwater Technology Institute, Shanghai Jiaotong University, Shanghai 200231, China)
  • Online:2013-08-28 Published:2013-08-12
  • Contact: LI Ke(李 科) E-mail:nick.88@163.com

PDF (PC)

303

摘要： The back analysis of initial stress is usually based on measured stress values, but the measuring of initial stress demands substantial investment. Therefore, amounts of underground engineering have no measured initial stress data, such as tunneling engineering. Focusing on this problem, a new back analysis method which does not need measured initial stress data is developed. The fault is assumed to be caused by initial load, the displacement discontinuity method (DDM) which considered non-linear fault is adopted to establish a numerical model of the engineering site, and the multivariable regression analysis of the initial stress field around the faults is carried out based on the fault throw. The result shows that the initial stress field around the faults is disturbed significantly, stress concentration appears in the tip zone, the regressive fault throw matches the measured values well, and the regressive initial stress field is reliable.

关键词: displacement discontinuity method (DDM), fault, initial stress field, regression analysis, numerical simulation

Abstract: The back analysis of initial stress is usually based on measured stress values, but the measuring of initial stress demands substantial investment. Therefore, amounts of underground engineering have no measured initial stress data, such as tunneling engineering. Focusing on this problem, a new back analysis method which does not need measured initial stress data is developed. The fault is assumed to be caused by initial load, the displacement discontinuity method (DDM) which considered non-linear fault is adopted to establish a numerical model of the engineering site, and the multivariable regression analysis of the initial stress field around the faults is carried out based on the fault throw. The result shows that the initial stress field around the faults is disturbed significantly, stress concentration appears in the tip zone, the regressive fault throw matches the measured values well, and the regressive initial stress field is reliable.

Key words: displacement discontinuity method (DDM), fault, initial stress field, regression analysis, numerical simulation

中图分类号: