Stability Analysis of a Force-Aided Lever Actuation System for Dry Clutches with Negative Stiffness Element

doi:10.1007/s12204-018-1932-y

摘要/Abstract

摘要： A force-aided lever with a preload spring is not only force-saving but also energy-saving. Therefore, it has great potential to be applied to dry clutch actuations. However, the negative stiffness of the clutch diaphragm spring introduces unstable dynamics which becomes more intensive due to the preload spring. In order to explore the intensified unstability, this paper builds dynamic models for the rotating lever coupling a negative stiffness diaphragm spring and a preload spring. The stability analysis using the Routh-Huiwitz criterion shows that the open-loop system can never be stable due to the negative stiffness. Even if the diaphragm spring stiffness is positive, the system is still unstable when the preload of the spring exceeds an upper limit. A proportionalintegral- derivative (PID) closed-loop scheme addressing this problem is designed to stabilize the system. The stability analysis for the closed-loop system shows that stable region emerges in spite of the negative stiffness; the more the negative stiffness is, the less the allowed preload is. Further, the influences of the dimensions and PID parameters on the stability condition are investigated. Finally, the transient dynamic responses of the system subjected to disturbance are compared between the unstable open-loop and stabilized closed-loop systems.

关键词: negative stiffness, preload spring, stability, dry clutch, actuation system, force-aided lever

Abstract: A force-aided lever with a preload spring is not only force-saving but also energy-saving. Therefore, it has great potential to be applied to dry clutch actuations. However, the negative stiffness of the clutch diaphragm spring introduces unstable dynamics which becomes more intensive due to the preload spring. In order to explore the intensified unstability, this paper builds dynamic models for the rotating lever coupling a negative stiffness diaphragm spring and a preload spring. The stability analysis using the Routh-Huiwitz criterion shows that the open-loop system can never be stable due to the negative stiffness. Even if the diaphragm spring stiffness is positive, the system is still unstable when the preload of the spring exceeds an upper limit. A proportionalintegral- derivative (PID) closed-loop scheme addressing this problem is designed to stabilize the system. The stability analysis for the closed-loop system shows that stable region emerges in spite of the negative stiffness; the more the negative stiffness is, the less the allowed preload is. Further, the influences of the dimensions and PID parameters on the stability condition are investigated. Finally, the transient dynamic responses of the system subjected to disturbance are compared between the unstable open-loop and stabilized closed-loop systems.

Key words: negative stiffness, preload spring, stability, dry clutch, actuation system, force-aided lever

中图分类号:

TP 391.9

LIU Fengyu (刘峰宇), CHEN Li (陈俐), FANG Chengliang (房成亮), YIN Chengliang (殷成良). Stability Analysis of a Force-Aided Lever Actuation System for Dry Clutches with Negative Stiffness Element[J]. sa, 2018, 23(2): 218-226.

参考文献 25

[1]	GAO B Z, LIANG Q, XIANG Y, et al. Gear ratio optimizationand shift control of 2-speed I-AMT in electricvehicle [J]. Mechanical Systems and Signal Processing,2015, 50/51: 615-631.
[2]	WANG Y L, GAO B Z, CHEN H. Data-driven designof parity space-based FDI system for AMT vehicles[J]. IEEE/ASME Transactions on Mechatronics, 2015,20(1): 405-415.
[3]	LIU F Y, CHEN L, YAO J, et al. A new clutch actuationsystem for dry DCT [C]//SAE Technical Paper.Detroit, USA: SAE International, 2015: 01.1118.
[4]	LEE JW, JEONG E H, KAM J H. Clutch actuator fora vehicle: US8887885B2 [P]. (2014-11-18) [2017-01-20].
[5]	LIU Y G, QIN D T, JIANG H, et al. Clutch torqueformulation and calibration for dry dual clutch transmissions[J]. Mechanism and Machine Theory, 2011,46(2): 218-227.
[6]	FAUST H, B¨UNDER C, DEVINCENT E. Dual clutchtransmission with dry clutch and electro-mechanicalactuation [J]. ATZ Worldwide, 2010, 112(4): 30-34.
[7]	KIMMIG K L, B¨UHRLE P, HENNEBERGER K, etal. Success with efficiency and comfort: The dry doubleclutch has become established on the automatic transmissionmarket [C]//Proceedings of the 9th SchaefflerSymposium. [s.l.]: Schaeffler Group, 2010: 154-162.
[8]	MYKLEBUST A. Modeling and estimation for dryclutch control [D]. Link¨oping, Sweden: Department ofElectrical Engineering, Link¨oping University, 2013.
[9]	VASCA F, IANNELLI L, SENATORE A, et al. Modelingtorque transmissibility for automotive dry clutchengagement [C]//Proceedings of the American ControlConference. Seattle, USA: AACC, 2008: 306-311.
[10]	WANG Y C, LAKES R S. Exreme stiffness systemsdue to negative stiffness elements [J]. American Journalof Physics, 2004, 72(1): 40-50.
[11]	LAKES R S. Extreme damping in composite materialswith a negative stiffness phase [J]. Physical ReviewLetters, 2001, 86(13): 2897-2900.
[12]	LAKES R S, LEE T, BERSIE A, et al. Extremedamping in composite materials with negative-stiffnessinclusions [J]. Nature, 2001, 410(6828): 565-567.
[13]	LAKES R S, DRUGANW. Dramatically stiffer elasticcomposite materials due to a negative stiffness phase?[J]. Journal of the Mechanics and Physics of Solids,2002, 50(5): 979-1009.
[14]	LEE C M, GOVERDOVSKIY V N. Alternative vibrationprotecting systems for men-operators of transportmachines Modern level and prospects [J]. Journal ofSound and Vibration, 2002, 249(4): 635-647.
[15]	LEE C M, GOVERDOVSKIY V N. A multi-stagehigh-speed railroad vibration isolation system with“negative” stiffness [J]. Journal of Sound and Vibration,2012, 331(4): 914-921.
[16]	LEE C M, GOVERDOVSKIY V N, TEMNIKOV A I.Design of springs with “negative” stiffness to improvevehicle driver vibration isolation [J]. Journal of Soundand Vibration, 2007, 302(4/5): 865-874.
[17]	PASTERNAK E, DYSKIN A V, SEVEL G. Chains ofoscillators with negative stiffness elements [J]. Journalof Sound and Vibration, 2014, 333(24): 6676-6687.
[18]	WANG Y C, LAKES R S. Stable extremely-highdampingdiscrete viscoelastic systems due to negativestiffness elements [J]. Applied Physics Letters, 2004,84(22): 4451-4453.
[19]	ARRIETA O, VISIOLI A, VILANOVA R. PID autotuningfor weighted servo/regulation control operation[J]. Journal of Process Control, 2010, 20(4): 472-480.
[20]	OGATA K. Modern control engineering [M]. New Jersey,USA: Prentice Hall, 2009.
[21]	SLOTINE J J E, LI W. Applied nonlinear control [M].New Jersey, USA: Prentice Hall, 1991.
[22]	MARSDEN J E, RATIU T. Introduction to mechanicsand symmetry: A basic exposition of classicalmechanical systems [M]. Berlin/Heidelberg, Germany:Springer Science & Business Media, 2013.
[23]	RIGATOS G G. Adaptive fuzzy control of DC motorsusing state and output feedback [J]. Electric PowerSystems Research, 2009, 79(11): 1579-1592.
[24]	DOLCINI P J, WIT C C D, B′ECHART H. Dryclutch control for automotive applications [M]. London:Springer, 2010: 18-19.
[25]	DORF R C, BISHOP R H. Modern control systems[M]. New Jersey, USA: Prentice Hall, 2011.