上海交通大学学报(英文版) ›› 2015, Vol. 20 ›› Issue (4): 472-476.doi: 10.1007/s12204-015-1652-5
SUN Bo1* (孙 博), YE Tian-yuan1 (叶田园), FANG Yuan2 (方 园)
出版日期:
2015-08-29
发布日期:
2015-08-05
通讯作者:
SUN Bo (孙 博)
E-mail:sunbo@buaa.edu.cn
SUN Bo1* (孙 博), YE Tian-yuan1 (叶田园), FANG Yuan2 (方 园)
Online:
2015-08-29
Published:
2015-08-05
Contact:
SUN Bo (孙 博)
E-mail:sunbo@buaa.edu.cn
摘要: The reliability of electrical connectors has critical impact on electronic systems. It is usually characterized by failure rate prediction value according to standard MIL-HDBK-217 (or GJB-299C in Chinese) in engineering practice. Given to their limitations and mislead results, a new failure rate prediction models needs to be presented. The presented model aims at the mechanism of increase of film thickness which leads to the increase of contact resistance. The estimated failure rate value can be given at different environmental conditions, and some of the factors affecting the reliability are taken into account. Accelerated degradation test (ADT) was conducted on GJB599III series electrical connector. The failure rate prediction model can be simply formed and convenient to calculate the expression of failure rate changing with time at various temperature and vibration conditions. This model gives an objective assessment in short time, which makes it convenient to be applied to the engineering.
中图分类号:
SUN Bo1* (孙 博), YE Tian-yuan1 (叶田园), FANG Yuan2 (方 园). A Novel Model of Failure Rate Prediction for Circular Electrical Connectors[J]. 上海交通大学学报(英文版), 2015, 20(4): 472-476.
SUN Bo1* (孙 博), YE Tian-yuan1 (叶田园), FANG Yuan2 (方 园). A Novel Model of Failure Rate Prediction for Circular Electrical Connectors[J]. Journal of shanghai Jiaotong University (Science), 2015, 20(4): 472-476.
[1] MIL-HDBK-217F, Reliability prediction of electronic equipment [S].[2] BS IEC 61586:1997, Estimation of the reliability of electrical connectors [S].[3] Mcleish J. Enhancing MIL-HDBK-217 reliability predictions with physics of failure methods [J]. Advancing Microelectronics, 2010, 37: 28-32.[4] Chen Wen-hua, Li Hong-shi, Lian Wen-zhi, et al. Accelerated life test and statistical analysis of aerospace electrical connectors under multiple environmental stresses [J]. Zhejiang University Journal (Engineering Science), 2006, 40(2): 348-351 (in Chinese).[5] Wu J. Electrical characterization and reliability assessment of lead-free solder coated electrical contacts[D]. Maryland: University of Maryland, 2003.[6] Ganesan S, Wu J, Pecht M, et al. Assessment of long-term reliability in lead-free assemblies [C]//2005 International Conference on Asian Green Electronics.[s.l.]: IEEE, 2005, 140-155.[7] Wu J, Pecht M G. Contact resistance and fretting corrosion of lead-free alloy coated electrical contacts[J]. IEEE Transactions on Component and Packing Technologies, 2006, 29(2): 402-410.[8] Swingler J. Enhancing connector reliability by using conducting polymer materials to minimize contact fretting [J]. Material and Design, 2009, 30: 3935-3942.[9] Arrowsmith P, Kapadia P, Hawley A, et al. Investigation of a connector electrical failure [J]. Surface and Interface Analysis, 2011, 43: 600-603.[10] Poddubnyi I, Khomiakov S, Kolganov V, et al.Electrical connectors for blanket modules in ITER [J].Fusion Engineering and Design, 2014, 89: 1336-1340.[11] Shibutani T, Wu J, Yu Q, et al. Key reliability concerns with lead-free connectors [J]. Microelectronic Reliability,2008, 48: 1613-1627.[12] Gao J C, Chen C, Flowers G T, et al. The influence of particulate contaminants on vibrationinduced fretting degradation in electrical connectors[C]//Proceedings of the 56th IEEE Holm Conference on Electrical Contacts. [s.l.]: IEEE, 2010: 342-350.[13] Bury K V. Statistical models in applied science [M].New York: John Willy & Sons, 1975.[14] Bury K V. Distribution of smallest log-normal and gamma extremes [J]. Statistics Hefts, 1975, 16(2): 105-114. |
[1] | SHI Lianxing (石连星), WANG Zhiheng (王志恒), LI Xiaoyong (李小勇) . Novel Data Placement Algorithm for Distributed Storage System Based on Fault-Tolerant Domain[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 463-470. |
[2] | QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778. |
[3] | KOU Haixia, AN Zongwen, MA Qiang, GUO Xu. Lifetime Prediction of Wind Turbine Blade Based on Full-Scale Fatigue Testing [J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 755-761. |
[4] | ZHOU Yuan (周源), WANG Haowei (王浩伟), Lü Weimin (吕卫民). Statistical Inference of Reliability with Multivariate Accelerated Degradation Data[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(2): 237-245. |
[5] | LAI Junfeng (赖俊峰), JI Dandan (季丹丹), YAN Zaizai (闫在在). Extended Inverse Gaussian Distribution: Properties and Application[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(2): 193-200. |
[6] | XU Jiajun (许家俊), PEI Zhiyuan (裴志远), GUO Lin (郭琳), ZHANG Ruxia (张儒侠), HU Hualang. Reliability Analysis of Cloud Service-Based Applications Through SRGM and NMSPN[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(1): 57-64. |
[7] | CHENG Li (程立), YANG Yuanyuan (杨媛媛), MU Huina (穆慧娜), YANG Xiaoyu (杨小玉), LI Li (李立. Reliability Evaluation Method Based on Double Beta Prior Distribution for the Pyrotechnic Device[J]. J Shanghai Jiaotong Univ Sci, 2019, 24(5): 622-627. |
[8] | LIU Gehui (刘葛辉), LONG Xiangyu (龙翔宇), TONG Shuo (仝硕), ZHANG Rui (张瑞), CHEN Shaoku. Optimum Consecutive Preventive Maintenance Scheduling Model Considering Reliability[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 490-495. |
[9] | PENG Rui (彭锐), MA Xiaoyang *(马晓洋), ZHAI Qingqing (翟庆庆), GAO Kaiye (高凯烨). Software Reliability Growth Model Considering First-Step and Second-Step Fault Dependency[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(4): 477-479. |
[10] | GU Yingkui *(古莹奎), SHEN Yanjun (沈延军), YU Dongping (余东平). Degradation Reliability Analysis Based on TOPSIS Model Selection Method[J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(3): 351-356. |
[11] | DUAN Fengjun (段凤君), WANG Guanjun (王冠军). Bivariate Constant-Stress Accelerated Degradation Model and Inference Based on the Inverse Gaussian Process[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 784-790. |
[12] | YU Guibo (于贵波), CAO Lijun (曹立军), WANG Shuhai (王书海), MA Qiao (马乔). Research on Nonlinear Dynamic Simulation and Fatigue Reliability Life Prediction for Synthesis Transmission System of Self-Propelled Gun[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 776-783. |
[13] | ZHANG Sheng (张生), REN Chenhui (任晨辉), WAN Liyong (万里勇), YI Xiaojian (伊枭剑), DONG . Reliability Analysis of Aero-Engine Main Fuel System Based on GO Methodology[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 770-775. |
[14] | LIU Ji (刘骥), ZHANG Mingze (张明泽), CHEN Xin (陈昕), QI Pengshuai (齐朋帅). Approach for Reliability Evaluation of Cross-Linked Polyethylene Under Combined Thermal and Vibration Stresses[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(6): 758-763. |
[15] | ZHANG Shuai (张帅), Lü Ruoning (吕若宁), SI Shubin (司书宾), REN Fangyu (任方宇). Reliability Analysis of Systems with Common Cause Failure Based on Stress-Strength Interference Model[J]. Journal of Shanghai Jiao Tong University (Science), 2018, 23(5): 707-710. |
阅读次数 | ||||||
全文 |
|
|||||
摘要 |
|
|||||