Simulation on Mechanical Properties of Resistance Element
 Welding of Aluminum and Steel

doi:10.16183/j.cnki.jsjtu.2019.05.015

Abstract

Abstract: The mechanical properties of resistance element welding (REW) joints are decided by both effects of fusion welding and mechanical joining. The mechanical properties of REW for aluminum alloy to steel could be effectively studied by three-dimensional finite-element (FE) models. The modeling input consists of cross-section profile of joint observed by metallography, and stress-strain parameters of regional materials obtained by hardness test and empirical formula. Based on this new modeling method, the geometrical evolution and stress distribution during the mechanical testing of REW joints are studied systematically. Via comparing with parallel experimental results, the failure mode of REW joints is analyzed, which provides useful reference to understand the failure mechanism of REW joints.

Key words: resistance element welding, dissimilar material joining, mechanical properties, finite-element model, lap-shear performance, coach-peel performance

CLC Number:

TG 407

HE Guanzhong,LOU Ming,MA Yunwu,LI Yongbing. Simulation on Mechanical Properties of Resistance Element Welding of Aluminum and Steel[J]. Journal of Shanghai Jiaotong University, 2019, 53(5): 616-623.

References

［1］李永兵, 马运五, 楼铭, 等. 轻量化多材料汽车车身连接技术进展［J］. 机械工程学报, 2016, 52(24): 1-23. LI Yongbing, MA Yunwu, LOU Ming, et al. Advances in welding and joining processes of multi-material lightweight car body［J］. Journal of Mechanical Engineering, 2016, 52(24): 1-23. ［2］CHEN N N, WANG H P, CARLSON B E, et al. Fracture mechanisms of Al/steel resistance spot welds in lap shear test［J］. Journal of Materials Processing Technology, 2017, 243: 347-354. ［3］龙江启, 兰凤崇, 陈吉清. 车身轻量化与钢铝一体化结构新技术的研究进展［J］. 机械工程学报, 2008, 44(6): 27-35. LONG Jiangqi, LAN Fengchong, CHEN Jiqing. New technology of lightweight and steel-aluminum hybrid structure car body［J］. Chinese Journal of Mechanical Engineering, 2008, 44(6): 27-35. ［4］HAMIDINEJAD S M, KOLAHAN F, KOKABI A H. The modeling and process analysis of resistance spot welding on galvanized steel sheets used in car body manufacturing［J］. Materials & Design, 2012, 34: 759-767. ［5］邱然锋, 石红信, 张柯柯, 等. 汽车车身用铝合金与钢的异种材料电阻点焊技术研究现状［J］. 电焊机, 2010, 40(5): 150-154. QIU Ranfeng, SHI Hongxin, ZHANG Keke, et al. Research status of resistance spot welding between steel and aluminumalloy for automobile body［J］. Electric Welding Machine, 2010, 40(5): 150-154. ［6］金鑫, 李永兵, 楼铭, 等. 基于正交试验的铝合金——高强钢异种金属自冲铆接工艺优化［J］. 汽车工程学报, 2011, 1(3): 185-191. JIN Xin, LI Yongbing, LOU Ming, et al. Process optimization of self-piercing riveting aluminum to high strength steel using DOE method［J］. Chinese Journal of Automotive Engineering, 2011, 1(3): 185-191. ［7］ABE Y, KATO T, MORI K. Self-piercing riveting of high tensile strength steel and aluminium alloy sheets using conventional rivet and die［J］. Journal of Materials Processing Technology, 2009, 209(8): 3914-3922. ［8］MESCHUT G, HAHN O, JANZEN V, et al. Innovative joining technologies for multi-material structures［J］. Welding in the World, 2014, 58(1): 65-75. ［9］MESCHUT G, JANZEN V, OLFERMANN T. Innovative and highly productive joining technologies for multi-material lightweight car body structures［J］. Journal of Materials Engineering and Performance, 2014, 23(5): 1515-1523. ［10］凌展翔, 罗震, 冯悦峤, 等. 硼钢与铝合金的新型电阻单元焊技术［J］. 焊接学报, 2016, 37(7): 109-113. LING Zhanxiang, LUO Zhen, FENG Yueqiao, et al. Novel resistance element welding of Al alloy to boron steel［J］. Transactions of the China Welding Institution, 2016, 37(7): 109-113. ［11］LING Z, LI Y, LUO Z, et al. Resistance element welding of 6061 aluminum alloy to uncoated 22MnMoB boron steel［J］. Materials and Manufacturing Processes, 2016, 31(16): 2174-2180. ［12］宇慧平, 王伟伟, 李晓阳, 等. 超高强钢点焊结构拉剪试验及数值仿真［J］. 焊接学报, 2013, 34(10): 9-12. YU Huiping, WANG Weiwei, LI Xiaoyang, et al. Experiments and numerical simulation on spot-welded structureof ultra-high strength steel［J］. Transactions of the China Welding Institution, 2013, 34(10): 9-12. ［13］ZENG L, XIA Y, ZHAO H, et al. On utilization of material failure criterion in modeling pull-out failure of spot-welded joints［C］//ASME 2013 International Mechanical Engineering Congress and Exposition. San Diego: American Society of Mechanical Engineers, 2013: V009T10A094-V009T10A094. ［14］TAYLOR M D, CHOI K S, SUN X, et al. Correlations between nanoindentation hardness and macroscopic mechanical properties in DP980 steels［J］. Materials Science & Engineering: A, 2014, 597: 431-439. ［15］ZHU H, ZHU Q, KOSASIH B, et al. Investigation on mechanical properties of high speed steel roll material by nanoindentation［J］. Materials Research Innovations, 2013, 17(Sup 2): 35-39. ［16］曾龙.高强钢点焊接头失效行为及仿真模型研究［D］.北京：清华大学，2013. ZENG Long. Study on the modeling and failure behaviors of high strength steel spot-welding joints［D］. Beijing: Tsinghua University, 2013. ［17］刘红, 贾平平. 提高管材弯曲仿真效率的方法［J］. 计算机仿真, 2015, 32(10): 234-238. LIU Hong, JIA Pingping. Method of rising simulation efficiency for tube bends［J］. Computer Simulation, 2015, 32(10): 234-238.

[1]	WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen. Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel [J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358.
[2]	WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756.
[3]	ZHU Qiang,QIN Fei,WANG Wurong,WEI Xicheng. Mechanical Properties of Three-Sheet Resistance Spot Welded Joints Under Different Lapping Orders [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1122-1129.
[4]	ZHANG Wei，AO Sansan， LUO Zhen，HAO Zhizhuang，CHEN Yao，FENG Mengnan，XIE Yan. Effect of Welding Energy on the Performance of Aluminum-Nickel Ultrasonic Welding Joints [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1130-1135.
[5]	QI Ruige,HE Chunxia,FU Jingjing,ZHAO Limei,JIANG Caiyun. ffect of Inorganic Nanoparticles on the Thermal and Mechanical Properties of Wood Fiber/HDPE Composites [J]. Journal of Shanghai Jiaotong University, 2019, 53(3): 373-379.
[6]	DU Siqi，WANG Jichong，PENG Xiongqi，GU Hailin. Fabrication and Mechanical Properties of Biodegradable Jute/Polylactic Acid Composites [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1335-1341.
[7]	LI Ping,ZHANG Kai,WANG Boxiaotian,XUE Kemin. Microstructure and Mechanical Properties of 7A60 Aluminum Alloy by Friction Stir Processing [J]. Journal of Shanghai Jiaotong University, 2019, 53(11): 1381-1388.
[8]	CUI Chengwen (崔成文), CHEN Yuting (陈禹廷), ZHANG Yong* (张勇). Effect of Electron Beam Irradiation on Thermal and Mechanical Properties of Polyamide Copolymer/Multiwall Carbon Nanotube Composites [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(1): 12-18.
[9]	MA Helong, LIAO Chencong, WANG Jianhua, LI Yaoliang. Field Test of Mechanical Properties of Large Diameter Steel Jacking Pipe Under Construction and Temperature Load in Soft Soil [J]. Journal of Shanghai Jiao Tong University, 2018, 52(11): 1444-1451.
[10]	CHEN Jianwen1,ZHOU Han1,CHEN Wujun2,ZHAO Bing2,WANG Mingyang3. Analysis of Elastic Parameters for Laminated Fabrics Used in#br# Airships Under Biaxial Stresses [J]. Journal of Shanghai Jiaotong University, 2017, 51(3): 344-.
[11]	GAO Fei, L Jiangang,ZHANG Zhongzhi,GUO Shaoyan. ThreeDimensional Simulation of the Modular HingeType Wings in Hovering Flight [J]. Journal of Shanghai Jiaotong University, 2017, 51(2): 166-.
[12]	Wen-hu LIN, Xue-ming HUA, Yi-xiong WU, Yong-sheng TANG, Hui-ping ZHANG. Reviews of the Cargo Containment Systems of Large Scale LNG Carriers and the Welding of Related Low Temperature Metals [J]. Ocean Engineering Equipment and Technology, 2014, 1(2): 160-165.
[13]	TANG Wei-qin (唐伟琴), HUANG Shi-yao (黄诗尧), ZHANG Shao-rui (张少睿), LI Da-yong (李大永), PENG Ying-hong* (彭颖红). Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31 [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(2): 186-189.
[14]	ZHANG Kewei1,SHE Huan2,LIU Hongliang2,SHU Da2,WANG Jun2. Influence of Si Contents on Microstructures and Mechanical Properties of High Strength and Toughness 7050 Aluminum Alloys [J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1712-1716.
[15]	XU Yuanyuan，GUI Zongyan，GAO Yun,LU Chong,CHENG Shujun. Mechanical Properties of Biodegradable Citric Acid-Based Polyester /Polylactide Blends [J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 806-810.

Simulation on Mechanical Properties of Resistance Element Welding of Aluminum and Steel

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments