Experimental Investigation of Mechanical Properties of the Polymer Layer of Laminated Steel Sheet

Abstract

Abstract:

A lap-shear test was conducted to obtain the shear property of the polymer layer in a laminated steel sheet, and shear strength was acquired as 10.64 MPa. A clamp mould was designed to make samples for normal tensile tests so as to get the normal property data of the polymer layer because of the engendered defects of T-peel test applied, and the tensile strength was obtained as 13.04 MPa. The viscosity of the polymer layer was investigated by examining the variation with time of bent angles of laminated steel sheet samples acquired from the V-bending experiment. It was shown that the viscosity of the polymer layer was not significant. The experiment results will be conducive to future numerical parametric analysis of influencing factors on bending and springback of the laminated steel sheet.

Key words：

Key words: laminated steel sheet, bonding properties, lap-shear test, normal tensile test, viscosity

CLC Number:

TG 381

WANG Yinjun1,PENG Qiongyao2,PENG Xiongqi2,WANG Tao3. Experimental Investigation of Mechanical Properties of the Polymer Layer of Laminated Steel Sheet[J]. Journal of Shanghai Jiaotong University, 2013, 47(11): 1666-1669.

References

［1］吕成,张国梁,张立文，等.高分子复合减振钢板的研究及其应用进展［J］.机械工程材料, 2005, 29(3): 46.

LV Cheng, ZHANG Guoliang, ZHANG Liwen, et al. Progress in research and application of polymer composite vibration damping steel sheets ［J］. Mater Mech Eng, 2005, 29(3): 46.

［2］程娴,英哲,陈礼清, 等.热固树脂K08AL钢层状复合板的成形性及减振性［J］.金属学报, 1995, 31(11): 499.

CHENG Xian, YING Zhe, CHEN Liqing, et al. Formability and vibration of thermosetting resins sandwiched laminated steel sheet ［J］. Acta Metall Sinic, 1995, 31(11): 499.

［3］Rao M D. Recent application of viscoelastic damping for noise control in automobiles and commercial airplanes［J］. J Sound Vib, 2003, 262: 457474.

［4］Cheng H S, Cao J, Yao H, et al. Wrinkling behavior of laminated steel sheets ［J］. J Mater Process Technol, 2004(151): 133140.

［5］陈劼实,陈军,黄元辰, 等.树脂复合减振钢板法向黏结强度与扩孔性能的试验研究［J］.上海交通大学学报, 2011, 45(6): 920921.

CHEN Jieshi, CHEN Jun, HUANG Yuanchen, et al. Experimental research on normal bonding strength and hole expanding capability of laminated vibration damping steel sheet［J］. Journal Shanghai Jiaotong Univinversity, 2011, 45(6): 920921.

［6］Li H B, Chen J, Yang J. Experimental and numerical investigation of laminated steel sheet in Vbending process considering nonlinear viscoelasticity of polymer layer ［J］. J Mater Process Technol, 2012, 212: 3645.

［7］王勇,陈军,唐炳涛, 等.基于有限元模拟的树脂复合减振钢板拉深成形性能预测［J］.上海交通大学学报,2007,41(10): 15861589.

WANG Yong, CHEN Jun, TANG Bingtao, et al. The drawing of laminated vibration damping steel sheet based on finite Element simulation［J］. Journal Shanghai Jiaotong Univinversity, 2007, 41(10): 15861589.

［8］Brinson H F, Brinson L C. Polym eng sci viscoelasticity［M］. New York: Springer Press, 2008: 333.

［9］Corona E, Eisenhour T. Wiping die bending of laminated steel ［J］. Int J Mech Sci, 2007(49): 392403.

［10］黄胜, 陈军, 李海波, 等.加载速度和存放时间对树脂复合减振钢板弯曲类回弹的影响规律［J］.塑性工程学报, 2010, 17(5): 1922.

HUANG Sheng, CHEN Jun, LI Haibo, et al. Influences of forming speed and storing time on springback characteristics of laminated sheet metal bent part ［J］. J Plast Eng, 2010, 17(5): 1922.

[1]	BI Jinmao, ZHANG Peng, ZHANG Jie, ZHAO Chuncai, CUI Li. Polyester Melt Characteristic Viscosity Prediction Method Under Incomplete Data [J]. Journal of Shanghai Jiao Tong University, 2024, 58(4): 534-544.
[2]	HAN Yu (韩煜), SUN Binbin (孙彬彬), JIANG Wenbo(姜闻博), DAI Kerong (戴尅戎). Formability of Printing Ink for Melt Electrowriting [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 411-415.
[3]	LIU Jun,ZHANG Zhinan,XIE Youbai. Effect of Low Viscosity Oil and Surface Texture on Friction Characteristics of Piston Ring-Liner [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 505-510.
[4]	MAO Lifu,WEI Chengzhu,LI Yinghui,YI Hong. Effect of Submergence Depth on the Resistance of a Small Waterplane Area Twin-Hull with Inclined Struts [J]. Journal of Shanghai Jiao Tong University, 2018, 52(3): 276-282.
[5]	YIN Jinge1，KONG Weiliang1，WANG Fuxin1， LIU Hong1，YANG Kun2. Experimental Investigation of Binary Supercooled Water Droplet Collision [J]. Journal of Shanghai Jiao Tong University, 2017, 51(8): 939-945.
[6]	RAO Zhiqiang (饶志强), YANG Chenjun* (杨晨俊). Lift Distribution Based Design of Two-Dimensional Sections [J]. Journal of shanghai Jiaotong University (Science), 2017, 22(3): 265-273.
[7]	RAN Qi-Kang-a, b . BSDEs and Viscosity Solutions of the Associated System with Partial Integro-Differential Equations [J]. Journal of Shanghai Jiaotong University, 2012, 46(09): 1522-1528.
[8]	XU Jing-a, PENG Xu-Dong-a, b , BAI Shao-Xian-a, b , MENG Xiang-Kai-a, b , LI Ji-Yun-a, b . Numerical Analysis of Gas Thermal Viscosity Effect on Performance of a Spiral-Groove Gas Face Seal [J]. Journal of Shanghai Jiaotong University, 2012, 46(05): 722-728.