High-Speed Jump Motion Control System for Electro-Discharge Machining Based on Programmable Multi-axis Controller

Abstract

Abstract: The requirements from designing high-speed jump motion control system for EDM (electro-discharge machining) were suggested in three terms: system capable of achieving high-speed motion control, system with good performance in responding and following the reference signal for axis and a jump motion course with high acceleration. A high-speed jump motion control system for EDM based on programmable multi-axis controller (PMAC) was studied and designed to meet the requirements suggested. The control system proposed was applied to type DK7140 commercial EDM machine and achieved stable main axis jump motion with maximum speed of 200 mm/s and maximum acceleration approximate to 9.68 m/s2. Through the experiments of processing narrow slots, the control system obtains good results in terms of maximum machined depth and processing efficiency, and validates the good performance in control and machining.
Key words：

Key words: high-speed jump motion, electro-discharge machining (EDM), control system, programmable multi-axis controller (PMAC)

CLC Number:

TG 661

LIANG Su, ZHAO Wan-Sheng, KANG Xiao-Ming. High-Speed Jump Motion Control System for Electro-Discharge Machining Based on Programmable Multi-axis Controller[J]. Journal of Shanghai Jiaotong University, 2012, 46(09): 1476-1481.

References

［1］赵万生，刘晋春，袁哲俊，等．抬刀对电火花加工稳定性的影响及其自适应控制［J］. 电加工与模具, 1990(1): 38.
ZHAO Wansheng, LIU Jinchun, YUAN Zhejun, et al. Impact of toollifting on machining stability and its selfadaptive control ［J］. Electromachining and Mould, 1990 (1): 38.
［2］周明, 韩福柱. 电火花加工自适应控制系统的研究［J］. 电加工与模具, 2008(6): 1620.
ZHOU Ming, HAN Fuzhu. Study of adaptive control system for EDM process［J］. Electromachining and Mould, 2008(6): 1620.
［3］刘晋春, 白基成, 郭永丰. 特种加工［M］. 北京: 机械工业出版社, 2008: 1252.
［4］Serkan C, Akira O, Yoshiyuki U. Effect of debris distribution on wall concavity in deephole EDM ［J］. JSME International Journal, 2004, 47(2): 553557.
［5］金子雄二. 直线电动机驱动的电火花加工机床的性能［J］. 模具工业, 2002(4): 5458.
Kaneko Y. Performances of the EDM processing machine driven by linear motor ［J］. Die and Mould Industry, 2002(4): 5458.
［6］YAN Cunliang, DU Daoshan, LI Congxin. Design of a realtime adaptive interpolator with parameter compensation ［J］. International Journal of Advanced Manufacturing Technology, 2007, 35(12): 169178.
［7］赵巍, 王太勇, 万淑敏. 基于NURBS曲线的加减速控制方法研究［J］. 中国机械工程, 2006, 17(1): 13.
ZHAO Wei, WANG Taiyong, WAN Shumin. Accelerationdeceleration control method based on NURBS curve ［J］. China Mechanical Engineering, 2006, 17(1): 13.
［8］姚哲，冯景春，王宇晗. 面向五轴加工的双NURBS曲线插补算法［J］. 上海交通大学学报, 2008, 42(2): 235238,244.
YAO Zhe, FENG Jingchun, WANG Yuhan. Dual NURBS curve interpolation algorithm for 5axis machining ［J］. Journal of Shanghai Jiaotong University, 2008, 42(2): 235238, 244.
［9］WAN Daping, WANG Shilong, ZHU Caichao, et al. Feedratescheduling and jerk control algorithm for highspeed CNC machining［J］. International Journal of Manufacturing Technology and Management, 2009, 17(3): 216231.
［10］Delta Tau Data Systems, Inc. PMAC user manual ［M］. USA: Delta Tau Data System Inc, 1998.
［11］贾振元, 任小涛, 刘巍, 等. 大深径比微小孔快速电火花加工系统［J］. 光学精密工程, 2009, 17 (12): 30553061.
JIA Zhenyuan, REN Xiaotao, LIU Wei, et al. Rapid EDM systems for micro and small holes with highaspectratio ［J］. Optics and Precision Engineering, 2009, 17 (12): 30553061.
［12］李论. 基于实时Linux的六轴联动电火花加工数控系统［D］. 哈尔滨: 哈尔滨工业大学机电工程学院, 2004.
［13］郭锐，赵万生，李论, 等. 基于Linux的微细电火花加工数控系统的研究［J］. 计算机集成制造系统, 2007, 13 (2): 370374.
GUO Rui, ZHAO Wansheng, LI Lun, et al. Micro electrical discharge machining CNC system based on Linux ［J］. Computer Integrated Manufacturing Systems, 2007, 13 (2): 370374.
［14］Delta Tau Data Systems, Inc. PMAC software reference manual［M］. USA: Delta Tau Data System Inc, 1998.

[1]	YE Haibo, YU Ke, NIU Rongbing, LI Siwei. Research on the Application of Large Language Model-Based Tactical Voice Command and Control Systems in Combat Environments [J]. Air & Space Defense, 2026, 9(1): 98-107.
[2]	TIAN Ye, AN Siwei, PI Li, SUN Chengyu, LI Longyue. Design and Configuration Concept of Air Defense Weapon Command and Control Architecture for Edge Computing [J]. Air & Space Defense, 2025, 8(6): 45-52.
[3]	ZHU Yulong, QIAO Jinxin, WEI Ruichuan, CAO Jianfeng, DING Liping. Research on Resource Restructuring Technology of High Density Launch Control System [J]. Air & Space Defense, 2025, 8(5): 98-104.
[4]	HE Yixiong, DAI Yonggang, ZHAO Xingya, YU Deqing, HUANG Liwen. Navigation Decision-Making Method in Estuary Deep Trough with Varying Width of Navigable Waters [J]. Journal of Shanghai Jiao Tong University, 2025, 59(4): 489-502.
[5]	ZHANG Yan, SUN Qin. Design of Optical Fiber Communication System for Subsea Production System Based on Ring Topology [J]. Ocean Engineering Equipment and Technology, 2025, 12(3): 67-72.
[6]	ZHANG Yu. Application and Maintenance of Automatic Control System in Petrochemical Industry [J]. Ocean Engineering Equipment and Technology, 2025, 12(2): 88-91.
[7]	TANG Jia, TIAN Chenzhi, SONG Min, HE Zhongmin, LI Quansheng. Research on Optimization Human-Computer Interaction Design in the AWACS Control System [J]. Air & Space Defense, 2024, 7(5): 90-96.
[8]	JIANG Bingbing, CAO JuHang, ZHANG Jie, GAO Lei, LONG Xiaopin, TANG Yu, LUO Jie, Li Jian, CHEN Juan, ZHANG Jie. Overview of deepwater umbilical pre-commissioning [J]. Ocean Engineering Equipment and Technology, 2023, 10(3): 13-23.
[9]	CHENG Shuai, LI Chen, ZHANG Yilun, TANG Chao, MENG Xianghui, XIE Youbai. A Forward Development Method for Functional Design of Civil Aircraft Flight Control System [J]. Journal of Shanghai Jiao Tong University, 2023, 57(10): 1305-1315.
[10]	XU Anyi, LI Peng, SUN Peijie, LAI Xiaoyi, HOU Lingxiao. Research on the Thermal Control Technology of a Manned Lunar Module During Lunar Day at the Typical Equator of the Moon [J]. Air & Space Defense, 2023, 6(1): 102-108.
[11]	YANG Ming1 (杨明), HUANG Jun1∗ (黄俊), ZHANG Wei2 (章伟). Further Result on the Observer Design for One-Sided Lipschitz Systems [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 817-822.
[12]	WANG Xingzhi, ZHAI Haibao, YAN Yaqin, WU Qingxi. Pre-Dispatching Method of New Generation Dispatching and Control System Based on Digital Twin and Deep Learning [J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 37-41.
[13]	ZHANG Liang, QU Gang, LI Huixing, JIN Haochun. Research and Application of Key Technologies of Network Security Situation Awareness for Smart Grid Power Control Systems [J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 103-109.
[14]	LIU Kai, YANG Baoqing. Compound Control System Design with Lateral Thrust and Aerodynamic Force Based on ADRC Method [J]. Air & Space Defense, 2021, 4(2): 40-47.
[15]	PENG Hao，ZHANG Xu，DENG Zhiguang，JIANG Wei，LIU Mingming，ZHANG Yu，LIU Guohai. Design and Verification of Virtualization Transplantation Method for Distributed Control System [J]. Journal of Shanghai Jiaotong University, 2019, 53(Sup.1): 118-122.

High-Speed Jump Motion Control System for Electro-Discharge Machining Based on Programmable Multi-axis Controller

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments