Analysis on Performance of Large Diameter Concrete Jacking Pipe

doi:10.16183/j.cnki.jsjtu.2011.10.015

Abstract

Abstract:

The load model and its design method of a pipe are to be improved. Based on the South Line project of sewage treatment in Shanghai, the performance of inner diameter of 4 m jacking pipe was studied by numerical simulation. The variation of contact pressure between pipe and soil during construction was analyzed, and the influence of covering soil depth was then discussed. The differences of the load model from "the technical specification for pipe jacking of water supply and sewerage engineering" were researched, and the differences of the internal forces were compared. The results show that soil arch effect is strengthened with increasing of cover soil depth, while the distribution of contact pressure is more uniform than the codes. Therefore, the active earth pressure is conservative to calculate lateral pressure, and the subgrade reaction could be also more uniformed. The bending moment of pipe will decrease while the axis force increase if the load model is improved, which would optimize the design method of pipe.

Key words: jacking pipe, large diameter, soil arch effect, load model, numerical simulation

CLC Number:

TU432

LEI Han, CHEN Jin-jian, WANG Jian-hua, ZHU Xiong. Analysis on Performance of Large Diameter Concrete Jacking Pipe[J]. Journal of Shanghai Jiao Tong University, 2011, 45(10): 1493-1497.

Figures/Tables 10

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig. 9

Fig. 10

[1]	秦建设, 吕国君.太沙基隧道松动土压力研究[J]. 施工技术, 2007, 36: 390-392.
	QIN Jian-she, Lǜ Guo-jun. Study on Terzaghi loose earth pressure in tunneling[J]. Construction Technology, 2007, 36: 390-392.
[2]	施仲衡.地下铁道设计与施工[M]. 西安: 陕西科学技术出版社, 1997.
[3]	铁道部第二勘察设计院.铁路工程设计技术手册———隧道[M]. 北京: 中国铁道出版社, 1995.
[4]	任旺. 成都地铁盾构隧道荷载分布研究[D]. 成都: 西南交通大学土木工程学院, 2009.
[5]	CECS 246: 2008，给水排水工程顶管技术规程[S].
[6]	ASCE 27-00, Standard practice for direct design of precast concrete pipe for jacking in trenchless construction[S].
[7]	ATV A-161, Structural calculation of driven pipes[S].

[1]	DING Enbao, CHANG Shengming, SUN Cong, ZHAO Leiming, WU Hao. Hydrodynamic Characteristics of a Surface Piercing Propeller Entering Water with Different Radiuses [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1188-1198.
[2]	WU Huaina, FENG Donglin, LIU Yuan, LAN Ganzhou, CHEN Renpeng. Anti-Uplift Portal Frame in Control of Underlying Tunnel Deformation Induced by Foundation Pit Excavation [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1227-1237.
[3]	LIU Jinhao, YAN Yuanzhong, ZHANG Qi, BIAN Rong, HE Lei, YE Guanlin. Centrifugal Test and Numerical Analysis of Impact of Surface Surcharge on Existing Tunnels [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 886-896.
[4]	CHEN Yonglin (陈永霖), YANG Weidong (杨伟东), XIE Weicheng (谢炜程), WANG Xiaoliang (王晓亮), FU Gongyi∗ (付功义). Meso-Scale Tearing Mechanism Analysis of Flexible Fabric Composite for Stratospheric Airship via Experiment and Numerical Simulation [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 873-884.
[5]	LI Jia, LI Huacong, WANG Yue. Transient Characteristics of a High-Speed Aero-Fuel Centrifugal Pump in Variable Gas-Liquid Ratio Conditions [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 622-634.
[6]	SUN Jian, PENG Bin, ZHU Bingguo. Numerical Simulation and Experimental Study of Oil-Free Double-Warp Air Scroll Compressor [J]. Journal of Shanghai Jiao Tong University, 2022, 56(5): 611-621.
[7]	XU Huilia (许慧丽), ZOU Zaojiana,b∗ (邹早建). Numerical Simulation of the Flow in a Waterjet Intake Under Different Motion Conditions [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 356-364.
[8]	QIN Han, WU Bin, SONG Yuhui, LIU Jin, CHEN Lan. Numerical Analysis of Support Interference for a Slender Configuration at Super Large Angles of Attack in High Speed Wind Tunnel [J]. Air & Space Defense, 2022, 5(3): 44-51.
[9]	XUE Fei, WANG Yuchao, WU Bin. Study on Backward Separation Characteristics of High-Speed Air Vehicle [J]. Air & Space Defense, 2022, 5(3): 80-86.
[10]	ZHENG Gaoyuan, ZHAO Yixi, CUI Junhui. Formation Law of Surface Defects in Stretch-Bending Formamtion of Aluminum Trim Strip for Automobile Body [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 53-61.
[11]	ZHOU Yu, ZHAO Yong, YU Zhongqi, ZHAO Yixi. Numerical Simulation of Stagger Spinning of Cylindrical Part with Cross Inner Ribs [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 62-69.
[12]	JIN Ge, FAN Min, ZHOU Zhendong, TAN Yong, ZHONG Xiaobo. Analysis and Improvement of Dynamic Characteristics of Lift Check Valves [J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 110-118.
[13]	XU Dehui, GU Hanyang, LIU Li, HUANG Chao. Thermal Experimental and Numerical Study on Performance of a Novel Conical Swirl-Vane Steam Separator [J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1087-1094.
[14]	LIU Heng, WU Rui, SUN Shuo. Numerical Simulation of Propeller Cavitation in Non-Uniform Flow [J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 976-983.
[15]	WANG Chao, LIU Zheng, LI Xing, WANG Chunhui, XU Pei. Influence of Free-State Ice Size and Initial Position on Coupled Hydrodynamic Performance of Ice Propeller [J]. Journal of Shanghai Jiao Tong University, 2021, 55(8): 990-1000.