Motion State Detection Technique for WallClimbing Robot Base on Two Degree of Freedom Universal Wheel Mechanism

Abstract

Abstract:

Abstract： The speed measuring mechanism base on two degree freedom universal wheel was designed, which consisted of a two degree of freedom roller, a rotary encoder, an angular displacement sensor and a horizontal attitude sensor and so on. When the robot moved, its attitude angle and angular velocity were detected by the level posture sensor, its velocity direction was detected by the angle sensor, and its speed was measured by the photoelectric encoder, thus, the motion state of the robot can be obtained by this measuring device, and the relationship between the motor input and control point motion was also established, provide basis for the precise operation of the robot.

Key words: wall-climbing robot, universal wheel, motion state detection

CLC Number:

TP 242

ZHENG Jun，QIU Qiang，LI Peng，PAN Jiluan. Motion State Detection Technique for WallClimbing Robot Base on Two Degree of Freedom Universal Wheel Mechanism[J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 379-382.

References

［1］Vagrancy J，Aldon M J, Fournier A. Mobile robot attitude estimation by fusion of inertial data ［C］∥Proceedings of the 1993 IEEE Conference on Robotics and Automation. Los Alamitos: The IEEE Computer Society Press, 1993: 277282.

［2］宋亦旭, 谈大龙. 基于内部传感器的轮式移动机器人运动速度估计［J］. 控制理论与应用, 2003,20(4):537546.

SONG Yixu, Tan Dalong. Wheeled mobile robot based on internal sensor speed estimation ［J］. Control Theory and Applications, 2003, 20(4): 537546.

［3］侯国庆. 移动机器人行走系统的运动学分析和稳定性研究［D］. 天津: 河北工业大学, 2007.

［4］Parsa K，Angeles J，Misra A K. Poseandtwist estimation rigid body using accelerometers［C］∥Proceedings of the 2001 IEEE International Conference on Robotics and Automation. Korea：The IEEE Computer Society Press, 2001: 28732878.

［5］黄思姬, 欧屹, 陶卫军，等. 履带式地面移动机器人动力学模型分析［J］. 机电工程, 2011, 28(3): 280285.

HUANG Siji, OU Yi, TAO Weijun, et al. Caterpillar ground mobile robot dynamics model analysis ［J］. Mechanical and Electrical Engineering，2011，28(3): 280285.

［6］耿军晓, 邢琳芬, 张志远. 基于速度观测器的移动机器人轨迹跟踪控制［J］. 徐州工程学院学报, 2010, 25(3): 1318.

GENG Junxiao, XING Linfen，ZHANG Zhiyuan. Speed observer based mobile robot trajectory tracking control ［J］. Journal of Xuzhou Engineering Institute, 2010, 25(3): 1318.

［7］康亮, 赵春霞, 郭剑辉. 履带式移动机器人轨迹跟踪研究［J］. 计算机科学, 2009, 36(6): 241244.

KANG Liang, ZHAO Chunxia,GUO Jianhui. Crawler mobile robot trajectory tracking study ［J］. Journal of Computer Science, 2009, 36(6): 241244.

[1]	YANG Zhen,FU Zhuang,GUAN Enguang,XU Jiannan,TIAN Shihe,ZHENG Hui. The Kinematic Analysis and Structure Optimization of MLattice Modular Robot [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1153-1159.
[2]	ZHAO Jun1,YU Haidong2. Dynamic Analysis of TwoLink Flexible Manipulators Based on the Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1160-1165.
[3]	ZHAO Ziren1,DU Shichang1,HUANG Delin1,REN Fei2,LIANG Xinguang2. Modelling and Bottleneck Analysis of Product Quality in Transient Phase of MultiStage Manufacturing Systems Based on Markovian Chains [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1166-1173.
[4]	HUANG Xuangui. Algorithm for Relatively Small Planted Clique with Small Edge Probability [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1202-1206.
[5]	LUO Jingjinga,YU Haidonga,ZHAO Chunzhanga,b,WANG Haoa,b. Study on Motion Stability of Variable CrossSection Flexible Beams Based on the Absolute Nodal Coordinate Formulation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1174-1180.
[6]	WANG Yibo1,HUANG Yixiang1,LI Bingchu1,LING Xiao1 ZHAO Shuai1,LIU Chengliang1,ZHANG Daqing2. An Improved Modal Simulation Method for Switched Reluctance Motor Based on Static PreComputation [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1181-1188.
[7]	ZHOU Binghai,LI Ming. Scheduling Method of Manufacturing Cells with Robot Restricted Processing [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1214-1219.
[8]	CHEN Jinping1,ZHANG Shusheng1,HE Weiping1,WANG Mingwei1,HUANG Hui2. Feasible Change Path Search and Optimization Method Based on Driving Parameter Modeling [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1220-1227.
[9]	ZHOU Penghui,MA Hongzhan,CHEN Dongping,CHEN Mengyue,CHU Xuening. Identification of Product Redesign Modules Based on Fuzzy Random Failure Mode and Effects Analysis [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1189-1195.
[10]	PENG Cheng,ZHU Jianyun,CHEN Li. Mode Transition for a Hybrid Electric Vehicle Based on Model Reference Control [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1196-1201.
[11]	LIU Wei,YANG Chao . A Study on Injection Mould Part Quotation Model Based on Back Propagation Neural Network [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1207-1213.
[12]	CHEN Suting，WANG Zhuo，WANG Qi. Aerial Scene Classification Based on Nonlinear Scale Space [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1228-1234.
[13]	CHEN Ning,HE Xiaobin,GUI Weihua,YANG Chunhua. Research on Image Encryption System Based on Chaotic Discrete Sequence [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1273-1280.
[14]	LIU Kaia，ZHANG Liminb，ZHOU Lijuna. Design of Random Restricted Boltzmann Machine Group [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1235-1240.
[15]	ZHU Xinyao1，SONG Baowei2,XU Gang1,YANG Songlin1. Research on Landing Strategy and Influencing Factors of an Autonomous Underwater Vehicle with Supporting Mechanism [J]. Journal of Shanghai Jiaotong University, 2017, 51(10): 1241-1251.