Mechanical Property and Ultimate Bearing Capacity of Ship Airbags

Abstract

Abstract:

The general geometry deformation and principle of thin shell pressure container etc were studied. A mathematical model of deformation, bearing force and inner air pressure of a loaded airbag was built. The membrane material property was determined by the uniaxial tensile test. The unified model could predict mechanical property and ultimate bearing capacity of the loaded airbag. Some cases were calculated and compared with the experimental data. The model was validated as a guidance for safety launching application.

Key words: ship airbags, mechanical property, ultimate bearing force, uniaxial tension test

CLC Number:

U 671

YU Longa,LI Yaob,XIA Lijuana,DING Jinhonga,YANG Qia. Mechanical Property and Ultimate Bearing Capacity of Ship Airbags[J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1072-1077.

References

［1］朱珉虎，孙菊香. 船舶气囊下水技术的最新进展［J］. 中外船舶科技，2009(2)：2129.

［2］王绍清，朱珉虎. 高承载力多层揉压气囊的研制与使用［J］. 中国修船， 2006， 19(3)： 4447.

［3］CB/T 37951996，船舶上排、下水用气囊［S］.

［4］CB/T 38372011，船舶用气囊上排、下水工艺要求［S］.

［5］ISO 14409:2011，船舶与海洋技术——船舶下水用气囊［S］.

［6］马剑，钱少明，胡夏夏. 船舶气囊下水过程结构应力变化的测试与分析［J］. 船舶工程， 2008， 30(3)： 1618.

MA Jian, QIAN Shaomin, HU Xiaxia, Measurement and analysis of the stress change of the structure during the ship launching by using gasbag［J］. Ship Engineering, 2008, 30(3): 1618.

［7］任慧龙，李陈峰，陈占阳. 船舶气囊下水安全性评估方法［J］. 中国造船，2009，50(4)：5360.

REN Huilong,LI Chenfeng, CHEN Zhanyang. Investigation on safety assessment of ship launching with airbags［J］. Ship Building of China, 2009,50(4): 5360.

［8］刘宏亮，夏利娟，余龙. 船舶气囊下水船体梁的结构计算方法［J］. 舰船科学技术， 2013， 35(4)： 2024.

LIU Hongliang, XIA Lijuan, YU Long. Ship’s hull girder’s structure calculation in the launching by the gasbags［J］. Ship Science and Technology, 2013, 35(4): 2024.

［9］刘志毅. 船舶下水用气囊力学性能的非线性分析［D］. 杭州：浙江工业大学建筑工程学院，2011.

［10］张利国，张嘉钟，贾力萍，等. 空气弹簧的现状及其发展［J］. 振动与冲击，2007，26(2)：146151.

ZHANG Liguo, ZHANG Jiazhong, JIA Liping, et al. Future and development of air springs［J］. Journal of Vibration and Shock, 2007, 26(2): 146151.

［11］成小飞，曹亮. 船舶气囊下水工艺中气囊承载性能影响因素分析［J］. 港口科技，2012(8)：3437.

CHENG Xiaofei, CAO Liang. Influential factors analysis for airbag’s bearing capacity in launching process［J］. Sicence & Technology of Ports, 2012(8): 3437.

［12］李世玉. 压力容器工程师设计指南［M］.北京：化学工业出版社，1995.

［13］GB/T 5282009/ISO 37:2005，硫化橡胶或热塑性橡胶拉伸应力应变性能的测定［S］.

［14］黄立身. 船舶气囊上下水应用现状与应改进的问题［J］. 中国修船， 1997(3)： 1518.

［15］孙菊香，徐才中，黄立身. 70000DWT船舶气囊下水计算与实践［J］. 中外船舶科技， 2011(4)： 1418.

[1]	WANG Lei, CHEN Zhe, WANG Haowei. Effect of Heat Treatment on Microstructure and Mechanical Properties of In-Situ Al Matrix Composite for Storage Tanks [J]. Air & Space Defense, 2024, 7(6): 112-119.
[2]	ZUO Xinde, CHEN Yi, LI Yang, LUO Zhen, AO Sansan. Effect of Adding Tantalum on Microstructure and Properties of NiTi Shape Memory Alloy Manufactured by Wire Arc Additive Manufacturing [J]. Journal of Shanghai Jiao Tong University, 2024, 58(3): 382-390.
[3]	YUAN Lihua (袁丽华), LIANG Sen∗ (梁森), YAN Shengyu (闫盛宇). In-Plane Elastic Properties of Stitched Plain Weave Composite Laminate [J]. J Shanghai Jiaotong Univ Sci, 2023, 28(2): 220-232.
[4]	JIANG Zhao (姜朝), HUA Xueming* (华学明), HUANG Lijin (黄立进),WU Dongsheng (吴东升), LI Fang (李芳), CAI Yan (蔡艳). High Efficiency and Quality of Multi-Pass Tandem Gas Metal Arc Welding for Thick Al 5083 Alloy Plates [J]. Journal of Shanghai Jiao Tong University (Science), 2019, 24(2): 148-157.
[5]	YU Jianchao,LIN Youxi. Oxygen Free Copper Dynamic Mechanical Property in High Speed Machining Process [J]. Journal of Shanghai Jiao Tong University, 2018, 52(5): 587-592.
[6]	PENG Xuefeng1，HAN Jingtao1，LIU Jing1，YAN Peijie2. Effect of Induction Tempering on Mechanical Properties of#br# ColdFormed High Strength Steel Square Tube [J]. Journal of Shanghai Jiao Tong University, 2017, 51(4): 438-.
[7]	JIN Xue,ZHU Ping,LI Han,WANG Qing. Research on Mechanical Properties of Locking Cap Lap Welds and Partitioned Seam Weld Model [J]. Journal of Shanghai Jiao Tong University, 2017, 51(11): 1297-1303.
[8]	YAO Qi,LUO Zhen,LI Yang,DUAN Rui,HUANG Zunyue. Weld Forming and Mechanical Property of Stainless Steel Underwater Laser Welding [J]. Journal of Shanghai Jiaotong University, 2015, 49(03): 333-336.
[9]	HUANG Qian-wei (黄芊蔚), WANG Li-ping (王莉萍), WANG Jin-ye* (王瑾晔). Mechanical Properties of Artificial Materials for Bone Repair [J]. Journal of shanghai Jiaotong University (Science), 2014, 19(6): 675-680.
[10]	SHEN Limin1,GONG Jianming2,LIU Huansheng1,HUANG Yuxia. Effect of Coking on Thermal Diffusion and Mechanical Property of HP40Nb Tube [J]. Journal of Shanghai Jiaotong University, 2014, 48(08): 1159-1163.
[11]	ZHENG Yu,LI Hongye,ZHUANG Xincun,ZHAO Zhen. A Review of Sheet Metal Shear Test Methods and Applications [J]. Journal of Shanghai Jiaotong University, 2014, 48(03): 422-426.
[12]	ZHANG Chao-feng1,2* (张超锋), ZHANG Zhi-sheng2 (张志胜), AOKI Tetsuhiko3 (青木徹彦), ZHANG Min4 (帐目). Research on the Dynamic Performance of Low-Yield-Strength Shear Panel Damper for Bridge Application [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(1): 118-128.
[13]	FAN Yongfeng. Experimental Study of Mechanical Properties of Lime Stabilized Expansive Soil under the Condition of Eluviations [J]. Journal of Shanghai Jiaotong University, 2013, 47(09): 1390-1394.
[14]	Zuo X.-W.; Zhou S.; Chen N.-L.; Liao B.. Timed quenching process for large-scale AISI 4140 steel shaft [J]. J Shanghai Jiaotong Univ Sci, 2011, 16(2): 224-226.
[15]	Yu N.; Zhang W.-M.. Simulating mechanical behavior of porous materials by homogenization method [J]. J Shanghai Jiaotong Univ Sci, 2011, 16(2): 190-194.