An Acoustic Model of Propagation of Dipole Source in Uniform Flow Duct

Abstract

Abstract:

A convect FW-H/thin-body boundary element method (BEM) hybrid method was established to study the propagation and scattering of the dipole source such as rotor/stator interaction noise source in the uniform flow duct. The acoustic model includes the generation and propagation of the sound source. The sound source is derived from the convect FW-H equation as the existence of the uniform flow and the flow field is calculated using the computational fluid dynamics (CFD) method. The propagation is derived from the thin-body BEM. In comparison to the Tyler-Sofrin duct model, the acoustic model can effectively predict the sound field of the propagation of the dipole sound source in the uniform flow.

Key words: dipole, sound source, duct, aeroacoustic, boundary element method (BEM), convect FW-H equation

CLC Number:

HU Binbina,OUYANG Huaa,WU Yadongb,DU Zhaohuia. An Acoustic Model of Propagation of Dipole Source in Uniform Flow Duct[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 692-696.

References

［1］Díaz A K M, Fernández O J M, Marigorta B E, et al. Numerical prediction of tonal noise generation in an inlet vaned lowspeed axial fan using a hybrid aeroacoustic approach ［J］. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2009, 223 (9): 20812098.

［2］Polacsek C, Burguburu S,Redonnet S, et al. Numerical simulations of fan interaction noise using a hybrid approach ［J］. AIAA Journal, 2006, 44 (6): 11881196.

［3］Tyler J M, Sofrin T G. Axial flow compressor noise studies ［J］. SAE Trans, 1962, 70：309332.

［4］Lee D J, Jeon W H, Chung K H. Development and application of fan noise prediction method to axial and centrifugal fan［C］∥ ASME 2002 Joint U.S.European Fluids Engineering Division Conference. Montreal, Canada: ASME, 2002: 987992.

［5］NajafiYazdi A, Brès G A, Mongeau L. An acoustic analogy formulation for moving sources in uniformly moving media ［J］. Proc R Soc London, Ser A, 2011, 467: 144165.

［6］Lai H X, Luo K H. A threedimensional hybrid LESacoustic analogy method for predicting opencavity ［J］. Noise Flow Turbulence Combust, 2007, 79 (1): 5582.

［7］Wu T W, Wan C G. Numerical modeling of acoustic radiation and scattering from thin bodies using a cauchy principal integral equation ［J］. Journal of the Acoustical Society of America, 1992, 92 (5): 29002912.

［8］金光远，欧阳华，胡彬彬,等. 小流量下周向弯曲叶片叶顶涡声特性研究［J］. 上海交通大学学报, 2011, 45 (6): 935939.

JIN Guangyuan, OUYANG Hua，HU Binbin, et al. Research of aerodynamic noise source in tip region of axial fans with circumferential skewed blades at offdesign conditions ［J］. Journal of Shanghai Jiaotong University, 2011, 45 (6)：935939.

[1]	QIN Guangfei, YAO Huilan, ZHANG Huaixin. Numerical Study of Stern Vibration of a Self-Propulsion Ship in Propeller Induced Pressure Fluctuation [J]. Journal of Shanghai Jiao Tong University, 2022, 56(9): 1148-1158.
[2]	ZENG Bo, MU Hongwei, DONG Houqi, ZENG Ming. Optimization of Active Distribution Network Operation Considering Decarbonization Endowment from 5G Base Stations [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 279-292.
[3]	LIU Xinyu, LU Xinyan, ZENG Long, HAO Zhenghang, ZHAO Qifang, LI Xianwei, HAO Tongmeng. Control Strategies for Suppressing Frequency Oscillation of Doubly-Fed Wind Farms Connected to Grid [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 303-311.
[4]	XU Huilia (许慧丽), ZOU Zaojiana,b∗ (邹早建). Numerical Simulation of the Flow in a Waterjet Intake Under Different Motion Conditions [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 356-364.
[5]	DOU Yibin, CHEN Ang, LU Yunchao, LIU Luguang, LI Zongyang. Identification of Temperature-Dependent Thermophysical Parameters Based on Levenberg-Marquardt Algorithm [J]. Air & Space Defense, 2022, 5(2): 17-26.
[6]	YIN Yankun, YI Difei. Engineering Criticality Assessment of Key Joint for Hull Structure of Semi-Submersible Floating Production Unit [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 52-57.
[7]	LUO Ruiqiao. Application of Down hole Throttle Technology in High Temperature Gas Fields in Eastern South China Sea [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 58-66.
[8]	SUN Chong, TIAN Tian, ZHU Xiaocheng, DU Zhaohui. Analysis of POD and EPOD for Unsteady Flow Field of Wind Turbine Airfoil [J]. Journal of Shanghai Jiao Tong University, 2022, 56(1): 45-52.
[9]	LIUYongfei. Simulation Analysis of a Subsea Hydraulic Control System Based on SimulationX [J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 1-7.
[10]	ZHAO Changying,WANG Boxiang,CHEN Jie,ZHANG Wenbin,HUANG Tiancheng,LIU Mengqi. Is There a Unified Theory for Heat Transfer at Ultimate Scales? [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 108-109.
[11]	JIN Haochun, GE Minhui, XU Bo. Optimization of DFIG Comprehensive Adaptive Frequency Regulation Parameters Based on Extreme Learning Machine [J]. Journal of Shanghai Jiao Tong University, 2021, 55(S2): 42-50.
[12]	HU Huanming, YANG Fan, ZHANG Junliang. Effect of Preparation Process of La_0.95FeO_3-_δ/C Composite Electrode on Preparation and Bifunctional Electrocatalytic Properties [J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1049-1057.
[13]	YANG Shuyan ∗ (杨淑雁), SONG Xiaobing (宋晓冰), JIA Hongxue (贾红学),CHEN Xi (陈溪), LIU Xila (刘西拉). Hysteretic Model for Corroded Rectangular Reinforced Concrete Bridge Column Under Seismic Loading [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 794-803.
[14]	YANG Mengyao, MAO Lulu, HAN Zhaolong, ZHOU Dai, LEI Hang, CAO Yu. Wind Vibration and Vibration Reduction of a H-Rotor Type Three-Bladed Vertical Axis Wind Turbine [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 347-356.
[15]	LI Xiaokai, ZHAO Yixi, YU Zhongqi, ZHU Baohang, CUI Junhui. Simulation Study of Aluminum Alloy Ribbed Member Spinning with Ultrasonic Vibration [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 394-402.