Technology and Weldability of Resistance Spot Welding of B1500HS Hot-Stamped Steel

Abstract

Abstract: Resistance spot welding of B1500HS hot-stamped steel with 1.5 mm was researched, using power-frequency alternating current welding equipment. The tension strength, hardness distribution, microstructure and the cross-tensile fracture appearance were analyzed. The test results show that the hot stamped steel has good weldability, and the nugget diameters and tensile shear strength both meet production requirements. The microstructure of spot welded metal is martensite. It is easy to get button fracture mode and shear dimples. The cross-tensile strength has sharply decreased, mainly as a result of the existence of softened zone in plastic ring.

Key words: hot-stamped steel, resistance spot weld, power-frequency alternating current, strength of joint

YANG Liu-1, CHENG Xuan-Ting-2, SUN You-2, WU Jia-Yuan-2, WANG Min-1, LIU Yu-3. Technology and Weldability of Resistance Spot Welding of B1500HS Hot-Stamped Steel[J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1103-1106.

[1]	WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明). Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756.
[2]	ZHU Qiang,QIN Fei,WANG Wurong,WEI Xicheng. Mechanical Properties of Three-Sheet Resistance Spot Welded Joints Under Different Lapping Orders [J]. Journal of Shanghai Jiaotong University, 2019, 53(9): 1122-1129.
[3]	KONG Liang,LING Zhanxiang,WANG Ze,WANG Min,PAN Hua,LEI Ming. Morphology and Distribution of the Liquid Metal Embrittlement Crack in the Resistance Spot Welded Joint of the Galvanized Q&P980 Steel [J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 704-707.
[4]	DU Huimin,LUO Zhen,AO Sansan,ZHANG Yu,HAO Zhizhuang. Influence of the Electrode Shape on Service Life in 5052 Aluminum Alloy Resistance Spot Welding [J]. Journal of Shanghai Jiaotong University, 2019, 53(6): 708-712.
[5]	XIAO Fenglin,ZHANG Yansong. Simulation Analysis on Fracture Modes of Ultra-High Strength Steel Spot-Welded Lap-Shear Joints [J]. Journal of Shanghai Jiaotong University, 2018, 52(3): 312-317.
[6]	FENG Qiaobo,LI Yongbing,LOU Ming1,LAI Xinmin. Performance of Resistance Spot Welding Joints for AISI 430 Ferritic Stainless Steel [J]. Journal of Shanghai Jiaotong University, 2018, 52(12): 1649-1654.
[7]	WAN Zixuan1,WANG Min1,JIAO Hailun1,GAO Boen2,LU Xinting2. Numerical Simulation of Projection Welding Between Hot-Stamped Steel and Low-Carbon Steel [J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 80-85.
[8]	GONG Liang1* (贡亮), XI Yan2 (席艳), Ma Zhe-ren1 (马喆人), LIU Cheng-liang1 (刘成良). Modeling, Identification and Simulation of DC Resistance Spot Welding Process for Aluminum Alloy 5182 [J]. Journal of shanghai Jiaotong University (Science), 2013, 18(1): 101-104.
[9]	WANG Shuan-yuan (王双园), GONG Liang* (贡亮), LIU Cheng-liang (刘成良). Self-Organizing Map Based Quality Assessment for Resistance Spot Welding with Featured Electrode Displacement Signals [J]. Journal of shanghai Jiaotong University (Science), 2012, 17(6): 673-678.
[10]	. Numerical Simulation in Resistance Spot Welding of Ultra-High Strength Hot-Formed Steel [J]. Journal of Shanghai Jiaotong University, 2012, 46(07): 1074-1078.
[11]	SHEN Qi1，LI Yongbing1，LI Ruihua2，CHEN Guanlong1 . Magnetic Field Distribution in Resistance Spot Welding Nugget under Permanent Magnet [J]. Journal of Shanghai Jiaotong University, 2011, 45(01): 25-0029.

Technology and Weldability of Resistance Spot Welding of B1500HS Hot-Stamped Steel

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 11

Recommended Articles

Metrics

Comments