Research on Scientific Innovative Management Mode Based on Closed-Loop Lifecycle Model in Institutions of Higher Education

Abstract

Abstract: There are many similarities in theory and process between scientific research projects management in institutions of higher education and product lifecycle management, while the closedloop product lifecycle management has good competence. After the summary and analysis of the current problems of the traditional scientific research management mode, this paper described the ideas and process of the design of scientific research innovative management mode based on closedloop lifecycle model in institutions of higher education. The practices of near ten “985 project” universities show that the scientific research innovative management mode can improve scientific research management performance, and the mode deserves being popularized in others institutions of higher education.

Key words: institutions of higher education, closed-loop, lifecycle management, scientific research innovative management mode, performance

CLC Number:

G311

DAI Zhi- Hua-a, b . Research on Scientific Innovative Management Mode Based on Closed-Loop Lifecycle Model in Institutions of Higher Education[J]. Journal of Shanghai Jiaotong University, 2011, 45(09): 1420-1424.

References

［1］Jun H B, Shin J H, Kiritsis D, et al. System architecture for closedloop PLM ［J］. International Journal of Computer Integrated Manufacturing, 2007, 20(7):684698.

［2］Kiritsis D. Closedloop PLM for intelligent products in the era of the Internet of things ［J］. Computer Aided Design, 2011, 43(5):479501.

［3］Kiritsis D, Nguyen V K, Stark J. How closedloop PLM improves knowledge management over the complete product lifecycle and enables the factory of the future ［J］. International Journal of Product Lifecycle Management, 2008, 3(1):5477.

［4］潘广钦. 全生命周期项目管理成熟度模型研究［J］. 项目管理技术，2010，8(7)：1822.

［5］王清，江海宁. 美国研究型大学科研管理对我国高校的启示［J］. 煤炭经济研究，2007(11)：8384.

［6］宋东林，付丙海，唐恒. 基于全生命周期的科技计划项目过程管理评价体系构建［J］. 科学管理研究，2011，29(1)：3237.

SONG Donglin, FU Binghai, TANG Heng. Constructing of index system for evaluation on technology project process management based on full lifecycle perspective ［J］. Scientific Management Research, 2011，29(1)：3237.

［7］刘俊峰，牛志敏，刘颖, 等. 国外高校科研管理对我国的启示［J］. 中国高等医学教育，2009(8)：3940.

［8］葛苏行. 科技计划项目全生命周期过程管理研究［D］.镇江：江苏大学工商管理学院，2010.

［9］李有平，欧阳进良. 国家科技项目监测评估实践的分析与探讨［J］. 科研管理，2008，29(6)：116122.

LI Youping, OUYANG Jinliang. The analysis and discussion on the monitoring and evaluation practice of national R&D projects ［J］. Scientific Research Management, 2008，29(6)：116122.

［10］肖智强. 对高校科技创新的几点思考［J］. 技术与创新管理，2007，28(5)：14.

XIAO Zhiqiang. On technical innovations at colleges and universities ［J］. Technology and Innovation Management, 2007，28(5)：14.

［11］何星蓉. 高校科研管理工作的思考［J］. 辽宁教育研究，2008(1)：9193.

［12］曾赛星. 项目管理［M］. 北京：北京师范大学出版社，2007.

［13］梅姝娥，仲伟俊. 我国高校科技成果转化障碍因素分析［J］. 科学学与科学技术管理，2008(3)：2227.

MEI Shue, ZHONG Weijun. Analysis of impediments to transform of achievements in scientific research ［J］. Science of Science and Management of Science and Technology, 2008(3)：2227.

[1]	YU Xinye, XUE Hongxiang, Yan Shuwei. Ultimate Strength and Protective Performance of Stiffened Panels Exposed to Fire-Induced High Temperature [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 929-936.
[2]	LI Jinjiang, XIANG Xianbo, LIU Chuan, YANG Shaolong. Robust Seabed Terrain Following Control of Underactuated AUV with Prescribed Performance Guidance Law Under Time Delay of Actuator [J]. Journal of Shanghai Jiao Tong University, 2022, 56(7): 944-952.
[3]	ZHENG Biaojie (郑标颉), MA Yuchen (马宇晨), TENG Jinfang∗ (滕金芳), JU Zhenzhou (居振州), ZHU Mingmin (朱铭敏). Effect of Moving Endwall on Hub Leakage Flow of Cantilevered Stator in a Linear Compressor Cascade [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(6): 780-789.
[4]	LI Peng, WANG Chao, SUN Huawei, GUO Chunyu. Numerical Simulation Strategy Optimization Analysis of Submarine Resistance and Flow Field [J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 506-515.
[5]	LI Yanbiao∗ (李研彪), CHEN Ke (陈科), SUN Peng (孙鹏), WANG Zesheng (王泽胜). Dynamic Modeling and Performance Evaluation of a Novel Humanoid Ankle Joint [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 570-578.
[6]	WANG Wenbin, ZHENG Shujiang, FAN Ruixiang, CHEN Wen, ZHOU Shiyang. Performance Evaluation Index and Method of Micro-Grid Distributed Electricity Trading Under the Background of “Carbon Peaking and Carbon Neutrality” [J]. Journal of Shanghai Jiao Tong University, 2022, 56(3): 312-324.
[7]	PEREIRA Eric Joseph1 (佩雷拉·埃里克·约瑟夫), TEH Hee-Min1,2∗ (郑希铭), MA Zhe3 (马哲). Hydrodynamic Performance of Air-Filled Wave Attenuator for Wave Control: Experimental Study [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(3): 316-325.
[8]	XU Dehui, GU Hanyang, LIU Li, HUANG Chao. Thermal Experimental and Numerical Study on Performance of a Novel Conical Swirl-Vane Steam Separator [J]. Journal of Shanghai Jiao Tong University, 2021, 55(9): 1087-1094.
[9]	ZHAO Pengfei, XUE Xin, YANG Cheng. Simulation of Influence of End Anchorage Degradation of Stirrups Caused by Alkali Aggregate Reaction on Shear Performance of Reinforced Concrete Beams [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 681-688.
[10]	HE Xiawei, CAI Yunze, YAN Lingling. A Combined Residual Detection Method of Reaction Wheel for Fault Detection [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 716-728.
[11]	NI He, QIN Haibo, ZHENG Yiyang. Simulation and Performance Reliability of Boiler Load Raising Process Considering Leakage of Feed Water [J]. Journal of Shanghai Jiao Tong University, 2021, 55(4): 444-454.
[12]	LIU Hongbing, SUN Liping, AI Shangmao, YAN Fasuo, CHEN Guoming. Elastic-Plastic Seismic Performance for Jacket Platform Based on Improved Modal Pushover Method [J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 265-275.
[13]	CAO Yu, HAN Zhaolong, ZHOU Dai, LEI Hang. Aerodynamic Performance of Counter-Rotating Vertical Axis Wind Turbine [J]. Journal of Shanghai Jiao Tong University, 2021, 55(2): 141-148.
[14]	LI Hao, ZHANG Zhenyu, SONG Xia, CHEN Jiangping. Experimental Study of a Trans-Critical CO₂ Mobile Air Conditioning System with an Ejector [J]. Journal of Shanghai Jiao Tong University, 2021, 55(2): 179-187.
[15]	ZHUANG Haowan, TENG Jinfang, ZHU Mingmin, QIANG Xiaoqing. Impacts of Blades Considering Manufacturing Tolerances on Aerodynamic Performance of Compressor [J]. Journal of Shanghai Jiaotong University, 2020, 54(9): 935-942.