数控机床最小维修的全寿命周期可靠性评估

摘要/Abstract

摘要：

摘要：基于叠加的对数线性过程(SLLP)，提出了多台数控机床在最小维修条件下的全寿命周期可靠性评估方法，建立了包含早期故障期和耗损故障期的浴盆曲线模型，定量分析了早期故障期的持续时间，给出了模型参数和可靠性指标的极大似然点估计和区间估计；同时，以多台数控机床现场故障截尾数据为例对模型进行验证.AIC值和拟合优度计算结果表明，SLLP模型优于叠加幂律过程模型，适用于数控机床的全寿命周期可靠性评估.

关键词: , 数控机床, 最小维修, 极大似然估计, 全寿命周期, 可靠性评估

Abstract:

Abstract： Based on superposed loglinear process (SLLP), a whole lifecycle reliability assessment method for multiple numericallycontrolled (NC) machine tools with minimal repair was proposed. A bathtub curve model, which includes early failure period and wear failure period, was presented. The lasting time of early failure period was quantitatively analyzed, and the point maximum likelihood and interval estimators of model parameters and reliability indices were given. An example of real data with failure truncation from multiNC machine tools was taken to prove the proposed method. The results of AIC and goodnessoffit show that the SLLP model is better than that of the superposed powerlaw process model, which is suitable for whole lifecycle reliability assessment of NC machine tools.

Key words: numericallycontrolled machine tools, minimal repair, maximum likelihood estimation, whole lifecycle, reliability assessment

中图分类号:

任丽娜，芮执元，刘军，雷春丽. 数控机床最小维修的全寿命周期可靠性评估[J]. 上海交通大学学报（自然版）, 2015, 49(01): 19-23.

REN Lina,RUI Zhiyuan,LIU Jun,LEI Chunli. Whole Lifecycle Reliability Assessment of Multiple NC Machine Tools with Minimal Repair[J]. Journal of Shanghai Jiaotong University, 2015, 49(01): 19-23.

参考文献

［1］王智明, 杨建国, 王国强, 等. 多台数控机床最小维修的可靠性评估［J］. 哈尔滨工业大学学报, 2011, 43(7): 127130.

WANG Zhiming, YANG Jianguo, WANG Guoqiang, et al. Reliability assessment of multiple NC machine tools with minimal repair ［J］. Journal of Harbin Institute of Technology, 2011, 43(7): 127130.

［2］Wang Z M, Yu X. Loglinear process modeling for repairable systems with time trends and its applications in reliability assessment of numerically controlled machine tools ［J］. Proceedings of the Institution of Mechanical Reliability Engineers. Part O: Journal of Risk and Reliability, 2013, 227(1): 5565.

［3］王智明, 杨建国. 数控机床可靠性评估中的边界强度过程［J］. 上海交通大学学报, 2012, 46(10): 16221626.

WANG Zhiming, YANG Jianguo. Bounded intensity process and its applications in reliability assessment of NC machine tools ［J］. Journal of Shanghai Jiaotong University, 2012, 46(10): 16221626.

［4］Pulcini G. Modeling the failure data of a repairable equipment with bathtub type failure intensity ［J］. Reliability Engineering and System Safety, 2001, 71: 209218.

［5］许彬彬, 杨兆军, 陈菲, 等. 非齐次泊松过程的数控机床可靠性建模［J］. 吉林大学学报:工学版, 2011, 41(S2): 210214.

XU Binbin, YANG Zhaojun, CHEN Fei, et al. Reliability model of CNC machine tools based on nonhomogeneous Poisson process ［J］. Journal of Jilin University: Engineering and Technology Edition, 2011, 41(S2): 210214.

［6］廖小波. 机床故障率浴盆曲线定量化建模及应用研究［D］. 重庆: 重庆大学机械工程学院, 2010.

［7］魏领会. 数控机床可用性耦合建模及影响度分析［D］. 吉林: 吉林大学机械科学与工程学院, 2011.

［8］Mun B M, Bae S J. Optimal maintenance policy of repairable system with bathtub shaped intensity ［C］//International Conference on ICQR2MSE. Xi’an: IEEE, 2011: 431435.

［9］Park S, Balarishnan N, Zheng G. Fisher information in hybrid censored data ［J］. Statistics and Probability Letters, 2008, 78(16): 27812786.

［10］Guo H R, Liao H T, Zhao W B, et al. A new stochastic model for systems under general repairs ［J］. IEEE Transactions on Reliability, 2007, 56(1): 4049.

［11］Louit D M, Pascual R, Jardine A K S. A practical procedure for the selection of timetofailure models based on the assessment of trends in maintenance data ［J］. Reliability Engineering and System Safety, 2009, 94(10): 16181628.

［12］Chen X M. Using Akaike information criterion for selecting the field distribution in a reverberation chamber ［J］. IEEE Transactions on Electromagnetic Compatibility, 2013, 55(4): 664670.

［13］任丽娜, 芮执元, 李建华, 等. 修正的边界强度过程模型及其应用［J］. 计算机集成制造系统, 2014, 20(3): 595602.

REN Lina, RUI Zhiyuan, LI Jianhua, et al. Modified bounded intensity process model and its application ［J］. Computer Integrated Manufacturing Systems, 2014, 20(3): 595602.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	管清宇, 夏品奇, 郑晓玲, 吴光辉. 复合材料层压板冲击后压缩强度拟合模型[J]. 上海交通大学学报, 2021, 55(11): 1459-1466.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.