双相钢板成形界面压力数值仿真及对板料表面损伤影响

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (05): 770-774.

双相钢板成形界面压力数值仿真及对板料表面损伤影响

高晶1，刘克素2，于忠奇1，林忠钦1

（1.上海交通大学上海市复杂薄板结构数字化制造重点实验室，上海 200240; 2.合肥工业大学材料科学与工程学院，合肥 230009）

收稿日期:2012-08-27 出版日期:2013-05-28 发布日期:2013-05-28
基金资助:
国家自然科学基金项目(51275298),上海市自然科学基金项目(11ZR1417900)资助

Numerical Analysis for Contact Pressure and Surface Damage in Dual-phase Steel Sheet Stamping

GAO Jing1，LIU Kesu2，YU Zhongqi1，LIN Zhongqin1

（1. Shanghai Key Laboratory of Digital Manufacturing for ThinWalled Structures, Shanghai Jiaotong University, Shanghai 200240, China; 2. School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China）

Received:2012-08-27 Online:2013-05-28 Published:2013-05-28

摘要/Abstract

摘要：

借助于有限元软件建立弯曲过程接触界面压力的仿真计算模型，并用于计算双相钢与模具接触界面的压力.结果表明，在整个冲压行程中，板料上界面的压力分布可分为瞬态阶段和稳态阶段.在瞬态阶段，板料上界面压力的分布不连续并存在2个明显的峰值，其界面压力峰值显著高于稳态阶段；在稳态阶段，板料上界面压力的分布均匀连续，分为高压力区和低压力区，板料刚流入凹模圆角处的界面压力大于流出凹模圆角处的界面压力.钢板强度和成形压边力影响稳态阶段的界面压力和接触区域宽度，且呈现出正比例变化关系，从而对钢板表面的损伤带来不利影响.

关键词: 双相钢板成形, 表面损伤, 磨损, 数值仿真, 界面压力

Abstract:

In order to obtain the evolution law of contact pressure between blank and tool interfaces in sheet metal forming, the numerical simulation model of a channel forming process was developed based on the finite element software ABAQUS. It was found from the numerical calculation that the contact pressure is comprised of an initial transient response and a steady phase in the duration of the forming process. While the contact pressure is continuous in steadystate and can be divided into a high contact pressure zone and a low contact pressure zone, the contact pressure in transient phase is discontinuous and is characterized by a twopeak contact pressure. The numerical results show the peak contact pressure in transient phase is much higher than that in steady phase, and the contact pressure on the blank at the start of die radius is higher than that at the end in steady phase. Furthermore, a parametric study was conducted. It was found that the steel strength has a positive proportion effect on the contact pressure, and the contact area increases with the increasing of the blank holder force.

Key words：

Key words: dual-phase steel stamping, surface damage, wear, numerical simulation, contact pressure

中图分类号:

TG 386.3

高晶1，刘克素2，于忠奇1，林忠钦1. 双相钢板成形界面压力数值仿真及对板料表面损伤影响[J]. 上海交通大学学报（自然版）, 2013, 47(05): 770-774.

GAO Jing1，LIU Kesu2，YU Zhongqi1，LIN Zhongqin1. Numerical Analysis for Contact Pressure and Surface Damage in Dual-phase Steel Sheet Stamping[J]. Journal of Shanghai Jiaotong University, 2013, 47(05): 770-774.

参考文献

［1］Sresomroeng B, Premanond V, Kaewtatip P, et al. Performance of CrN radical nitrided tools on deep drawing of advanced highstrength steel［J］. Surface and Coatings Technology, 2011, 25(11): 41984204.

［2］Cora  N, Koc M. Experimental investigations on wear resistance characteristics of alternative die materials for stamping of advanced highstrength steels (AHSS)［J］. International Journal of Machine Tools and Manufacture, 2009, 49(12): 897905.

［3］Cora  N, Acayazi A, Namiki K, et al. Die wear in stamping of advanced high strength steels: Investigations on the effects of substrate material and hardcoatings［J］. Tribology International, 2012, 52(1): 5060.

［4］Shih HuaChu, Shi Ming F. Die wear and coating galling in stamping advanced high strength steels［C］∥Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition IMECE2011. Denver, Colorado, USA: ASME, 2011.

［5］林启全，彭大暑，王志刚，等. 高强度钢板方盒形件拉深粘模行为［J］. 中南大学学报, 2009, 40(6): 15291534.

LIN Qiquan, PENG Dashu, WANG Zhigang, et al. Galling behavior in square cup drawing of high tensile strength steel［J］. Journal of Central South University, 2009, 40(6): 15291534.

［6］Kim H, Sung J, Goodwin F E, et al. Investigation of galling in forming galvanized advanced high strength steels (AHSSs) using the twist compression test (TCT)［J］. Journal of Materials Processing Technology, 2008, 205(26): 459468.

［7］Hou Yingke, Yu Zhongqi, LI Shuhui. Galling failure analysis in sheet metal forming process［J］. Journal of Shanghai Jiaotong University (Science), 2010, 15(2): 245249.

［8］照日格图，侯英苛，赵亦希，等. 模具表面形态演化对冲压件表面损伤的影响［J］. 上海交通大学学报, 2008, 42(5): 782785.

ZHAO Rigetu, HOU Yingke, ZHAO Yixi, et al. The effect of changing of tool surface microgeometry on surface galling in sheet metal forming［J］. Journal of Shanghai Jiaotong University, 2008, 42(5): 782785.

［9］Pereira M P, Yan W, Rolfe B F, et al. Contact pressure evolution and its relation to wear in sheet metal forming［J］. Wear, 2008, 265(11):16871699.

［10］Pereira M P, Duncan J L, Yan W, et al. Contact pressure evolution at the die radius in sheet metal stamping［J］. Journal of Materials Processing Technology, 2009, 209(7): 35323541.

［11］Pereira M P, Yan W, Rolfe B F. Wear at the die radius in sheet metal stamping［J］. Wear, 2010, 268(1): 12751284.

［12］Wang X Z, Masood S H. Investigation of die radius arc profile on wear behavior in sheet metal processing of advanced high strength steels［J］. Materials and Design, 2011, 32(1): 11181128.

［13］侯英岢. 汽车钢板冲压成形表面损伤规律与控制方法研究［D］.上海：上海交通大学机械与动力工程学院，2009.

［14］温诗铸，黄平. 摩擦学原理［M］. 北京：清华大学出版社, 2002.

[1]	陈安然, 贾岛, 何威. 高速破片侵彻靶板的特性及影响因素数值模拟研究[J]. 空天防御, 2025, 8(6): 53-61.
[2]	那鹏越, 毋振, 刘奇, 霍军周. 掘进机主轴承疲劳磨损竞争失效机制的寿命分析[J]. 上海交通大学学报, 2025, 59(5): 675-683.
[3]	肖金涛, 李洁琼, 王姝书, 沈曌隽, 周天导, 鞠鹏飞. 不同结构酚醛改性环氧树脂的力学性能及其对涂层摩擦磨损性能的影响[J]. 空天防御, 2024, 7(6): 128-134.
[4]	贺文选, 叶茂盛, 张雨, 张雅泰, 代晓辉, 张崎. 悬挂链在磨损条件下的极限强度评估[J]. 海洋工程装备与技术, 2024, 11(1): 23-29.
[5]	郑思敏, 滕黎明, 赵文静, 江锦波, 王梦娇, 彭旭东. 交变工况下深海装备机械密封端面温升和磨损特性[J]. 上海交通大学学报, 2023, 57(8): 948-962.
[6]	贲旭瑞, 周晓军. 考虑下机约束的精轧机组工作辊机会维护建模[J]. 上海交通大学学报, 2023, 57(8): 996-1004.
[7]	曲晓奇, 李红涛, 唐广银, 杜海越, 杨林林. 海上浮式风力机动力响应分析与数值仿真关键技术研究[J]. 海洋工程装备与技术, 2023, 10(2): 72-78.
[8]	赵一霖, 严立, 来霄毅, 马禄创, 侯凌霄, 叶哲霄. 新一代四机并联火箭发动机喷流热环境数值研究[J]. 空天防御, 2023, 6(1): 109-116.
[9]	李嘉, 李华聪, 王玥. 变汽液比条件下高速燃油离心泵非定常特性分析研究[J]. 上海交通大学学报, 2022, 56(5): 622-634.
[10]	刘昊, 孙世峰, 李晓佳, 郝敬宾, 杨海峰. 激光熔覆CoCrFeMnNiMo_x高熵合金涂层的微观组织及性能[J]. 上海交通大学学报, 2022, 56(12): 1675-1687.
[11]	周宇, 赵勇, 于忠奇, 赵亦希. 交叉内筋薄壁筒体错距旋压成形数值仿真[J]. 上海交通大学学报, 2022, 56(1): 62-69.
[12]	周俊杰, 余建波. 基于机器视觉的加工刀具磨损量在线测量[J]. 上海交通大学学报, 2021, 55(6): 741-749.
[13]	蒋怡涵, 吴佳松, 王武荣, 韦习成. 模具温升对22MnB5硼钢裸板高温摩擦磨损特性的影响[J]. 上海交通大学学报, 2021, 55(3): 258-264.
[14]	杨世平, 董梦瑜, 李飞. 一种双悬臂梁柔性销轴的微动疲劳研究[J]. 上海交通大学学报, 2021, 55(3): 236-248.
[15]	牛牧, 许黎明, 赵达, 范帆. 基于工件轮廓图像的砂轮磨损在线检测方法[J]. 上海交通大学学报, 2021, 55(3): 221-228.