典型煤种结渣的数值模拟研究

上海交通大学学报（自然版） ›› 2013, Vol. 47 ›› Issue (03): 364-369.

典型煤种结渣的数值模拟研究

王振, 胡瓅元, 罗永浩, 王苑

（上海交通大学机械与动力工程学院，上海 200240）

收稿日期:2012-04-13 出版日期:2013-03-28 发布日期:2013-03-28
基金资助:
上海市科委资助项目（08DZ1201503）

Numerical Simulation of Ash Deposit of Typical Coal in Pulverized Coal-Fired Boiler

WANG Zhen, HU Li-Yuan, LUO Yong-Hao, WANG Yuan

(School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China)

Received:2012-04-13 Online:2013-03-28 Published:2013-03-28

摘要/Abstract

摘要： 建立了与气固两相流动燃烧模型相耦合的飞灰沉积模型.对一台四角切圆锅炉燃用2种典型煤种（神木煤和淄博煤）时的结渣特性进行了数值模拟，对比了不同的颗粒黏度计算模型，预测了炉膛内不同位置的飞灰沉积量和厚度.模拟结果显示，前墙20～25 m高度附近结渣最严重，燃用神木煤时结渣比淄博煤更多.通过分析认为，采取合理工况，掺烧结渣倾向低的煤种可以有效减轻结渣.

关键词: 煤粉锅炉, 数值模拟, 结渣, 飞灰沉积, 典型煤种

Abstract: A numerical model coupled with comprehensive combustion code to predict ash deposition in a coal-fired boiler was developed. The results show serious slagging is mainly at 20-25 meter height of the front wall, because of the more rapid gas flow and higher temperature, and burning Shenmu coal will result in more slagging than Zibo coal. The predictions indicate slagging can be alleviated by proper operating conditions and using low slagging-tendency coals.

Key words: pulverized coal-fired boiler, numerical simulation, slagging, ash deposit, typical coal

中图分类号:

TK 224

王振, 胡瓅元, 罗永浩, 王苑. 典型煤种结渣的数值模拟研究[J]. 上海交通大学学报（自然版）, 2013, 47(03): 364-369.

WANG Zhen, HU Li-Yuan, LUO Yong-Hao, WANG Yuan. Numerical Simulation of Ash Deposit of Typical Coal in Pulverized Coal-Fired Boiler[J]. Journal of Shanghai Jiaotong University, 2013, 47(03): 364-369.

参考文献

［1］Wang H，Harb J N. Modeling of ash deposition in largescale combustion facilities burning pulverized coal［J］.
Progress in Energy and Combustion Science, 1997, 23(3): 267282.
［2］Fan J, Zha X, Sun P, et al. Simulation of ash deposit in a pulverized coalfired boiler［J］. Fuel, 2001, 80(5): 645
654.
［3］Mueller C, Selenius M, Theis M, et al. Deposition behaviour of molten alkalirich fly ashes——Development of a
submodel for CFD applications［J］. Proceedings of the Combustion Institute, 2005, 30(2): 29912998.
［4］Strandstrm K, Mueller C, Hupa M. Development of an ash particle deposition model considering buildup and removal
mechanisms［J］. Fuel Processing Technology, 2007, 88(1112): 10531060.
［5］You C, Zhou Y. Effect of operation parameters on the slagging near swirl coal burner throat［J］. Energy & Fuels,
2006, 20(5): 18551861.
［6］Wang X, Zhao D, He L, et al. Modeling of a coalfired slagging combustor: Development of a slag submodel［J］.
Combustion and Flame, 2007, 149(3): 249260.
［7］Fang Q, Wang H, Wei Y, et al. Numerical simulations of the slagging characteristics in a downfired,
pulverizedcoal boiler furnace［J］. Fuel Processing Technology, 2010, 91(1): 8896.
［8］Baxter L L. Ash deposition during biomass and coal combustion: a mechanistic approach［J］. Biomass and Bioenergy,
1993, 4(2): 85102.
［9］Walsh P M, Sayre A N, Loehden D O, et al. Deposition of bituminous coal ash on an isolated heat exchanger tube:
Effects of coal properties on deposit growth［J］. Progress in Energy and Combustion Science, 1990, 16(4): 327345.
［10］Watt J D, Fereday F. The flow properties of slags formed from the ashes of British coals: Part 1, Viscosity of
homogeneous liquid slags in relation to slag composition［J］. J Inst Fuel, 1969, 42: 99103.
［11］Urbain G, Cambier F, Deletter M, et al. Viscosity of silicate melts［J］. Trans J Br Ceram Soc,1981, 80(9):
139141.
［12］Senior C，Srinivasachar S. Viscosity of ash particles in combustion systems for prediction of particle sticking［J］
. Energy & Fuels, 1995, 9(2): 277283.
［13］Degereji M U Ingham D B, Ma L, et al. Prediction of ash slagging propensity in a pulverized coal combustion furnace
［J］. Fuel, 2012, 101(11): 171178.

[1]	金韬, 高斌, 王强强, 周行, 何文, 冯少孔. 拟共震源高密度面波法数据反演模拟算法及应用[J]. 上海交通大学学报, 2025, 59(7): 1029-1040.
[2]	张强, 陈振华, 王文龙, 苏怀维, 迟德建. 炸点控制对钢筋混凝土T梁桥的毁伤特性数值模拟研究[J]. 空天防御, 2025, 8(5): 83-90.
[3]	王子阳 , 王晓华, 郭冲霄, 等. 串油工艺研究及方法优化[J]. 海洋工程装备与技术, 2025, 12(4): 104-115.
[4]	巩超, 侯远杭, 张宇骐, 刘殿勇, 万跃进. 畸形波浪环境下的埋首式无人艇水面运动特性[J]. 上海交通大学学报, 2025, 59(4): 447-457.
[5]	武晓龙, 夏凯龙, 孟德君, 郝晟淳, 朱铭敏. 非轴对称布局压气机试验与数值模拟研究[J]. 上海交通大学学报, 2025, 59(12): 1916-1928.
[6]	李易, 欧树彦, 梁伟栋, 董佳宝, 庄至栋. 飞行器低空大动压整流罩旋抛分离数值模拟[J]. 空天防御, 2025, 8(1): 102-108.
[7]	徐浩东, 余童真, 樊伟, 李明广, 刘念武. 顶管施工过程中浆液扩散对减阻效果影响[J]. 上海交通大学学报, 2024, 58(7): 1067-1074.
[8]	邓贺方, 夏凯龙, 滕金芳, 羌晓青, 朱铭敏, 卢少鹏. 不同转速下沟槽型机匣对跨声速压气机性能的影响[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(6): 1151-1160.
[9]	冯漾漾, 丁浩亮, 胡平山, 严波. 注塑模稳态温度场的有限体积法模拟[J]. 上海交通大学学报, 2024, 58(4): 461-467.
[10]	刘羿伯1, 毕羽琴1, 马强2, 3, 肖华平1, 刘书海1. 水下螺旋轴流混输泵叶轮的结构设计与优化[J]. 海洋工程装备与技术, 2024, 11(4): 14-20.
[11]	王慧, 杜登轩, 刘海超, 喻国良, 张民曦. 均匀来流中带环翼的复合桩墩的局部冲刷数值试验研究[J]. 海洋工程装备与技术, 2024, 11(3): 1-9.
[12]	洪蕾1，肖皓1，叶佳2，马国红1. 径向超声波辅助MIG焊电弧的数值模拟[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 330-338.
[13]	张念凡, 肖龙飞, 陈刚. 海洋结构物波浪砰击的数值研究综述[J]. 上海交通大学学报, 2024, 58(2): 127-140.
[14]	李树勋，沈恒云，刘斌才，胡迎港，马廷前. 高温熔盐止回阀受熔盐颗粒冲击的压力脉动响应[J]. J Shanghai Jiaotong Univ Sci, 2024, 29(2): 271-279.
[15]	郭同彪, 张吉, 李新亮. 压缩拐角强激波边界层干扰直接数值模拟研究[J]. 空天防御, 2024, 7(2): 29-35.