分形粗糙表面接触变形分段计算模型

doi:10.16183/j.cnki.jsjtu.2018.06.014

摘要/Abstract

摘要： 针对现有分形理论描述粗糙表面接触变形过程存在的问题，以与波长对应的系数作为尺度划分依据，提出了一种考虑分形细节和微凸体接触变形过程的分段计算模型.通过数学推导和分析论述粗糙表面的接触变形过程，得出了与现有分形理论不同的结论，并论述了其不同的原因.基于此考虑了各尺度之间等效模型的连续性，导出了真实接触面积与载荷之间的隐函数关系，并进行了数值模拟分析.结果表明：粗糙表面的接触变形过程是从塑性变形到弹性变形的转变，在转变过渡区域会出现弹性变形和塑性变形交替的过程；某一确定尺度下微凸体变形前的顶端曲率半径是一个不随变形量变化的定值；当分形维度接近1时，粗糙表面以塑性变形为主，此时表面接触性质仅受到材料的影响；分形维度存在一个最佳值，此时粗糙表面接触性质最好.

关键词: 分形, 粗糙表面, 微凸体, 接触

Abstract: To address the existing problems of fractal theory, a piecewise calculation model was proposed. This new model was calculated by different functions with the corresponding parameters set by the wavelength. The fractal detail and deformation process of asperity were considered in this model. The contact deformation process of rough surface was studied and the relationship between real contact area and load was given. The analysis results showed that contact deformation process of rough surface is a transition from plastic to elastic contact model, where elastic deformation and plastic deformation model alternately take place. The top radius of curvature of the asperity is a fixed value which is independent of the deformation under a certain scale. When the fractal dimension is close to 1, the rough surface is dominated by the plastic deformation, and the surface contact property is only affected by the material. An optimal value of fractal dimension is existed when the rough surface contact property is the best.

Key words: fractal, rough surface, asperity, contact

中图分类号:

TH 117.1

陈虹旭，董冠华，谢罗峰，殷鸣，殷国富. 分形粗糙表面接触变形分段计算模型[J]. 上海交通大学学报（自然版）, 2018, 52(6): 722-728.

CHEN Hongxu,DONG Guanhua,XIE Luofeng,YIN Ming,YIN Guofu. A Piecewise Calculation Model for Fractal Rough Surface Contact Deformation[J]. Journal of Shanghai Jiaotong University, 2018, 52(6): 722-728.

参考文献

［1］葛世荣, 朱华. 摩擦学的分形［M］. 北京: 机械工业出版社, 2005. GE Shirong, ZHU Hua. Fractal in tribology ［M］. Beijing: China Machine Press, 2005. ［2］GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces ［J］. Proceedings of the Ro-yal Society A: Mathematical, Physical and Engineering Sciences, 1966, 295(1442): 300-319. ［3］SAYLES R S, THOMAS T R. Surface topography as a non-stationary random process ［J］. Nature, 1978, 271: 431-434. ［4］MAJUMDAR A, BHUSHAN B. Fractal model of elastic-plastic contact between rough surfaces ［J］. Journal of Tribology, 1991, 113(1): 1-11. ［5］MANDELBROT B B. Stochastic models for the earth’s relief, the shape and the fractal dimension of the coastlines, and the number-area rule for islands ［J］. Proceedings of the National Academy of Sciences, 1975, 72(10): 3825-3828. ［6］KOGUT L, ETSION I. Elastic-plastic contact analysis of a sphere and a rigid flat ［J］. Journal of Applied Mechanics, 2002, 69(5): 657-662. ［7］LIU P, ZHAO H, HUANG K, et al. Research on normal contact stiffness of rough surface considering friction based on fractal theory ［J］. Applied Surface Science, 2015, 349: 43-48. ［8］赵波, 戴旭东, 张执南, 等. 单峰接触研究及其在分形表面接触中的应用［J］. 摩擦学学报, 2014, 34(2): 217-224. ZHAO Bo, DAI Xudong, ZHANG Zhinan, et al. Single asperity contact and its use for fractal surface contact ［J］. Tribology, 2014, 34(2): 217-224. ［9］丁雪兴, 严如奇, 贾永磊. 基于基底长度的粗糙表面分形接触模型的构建与分析［J］. 摩擦学学报, 2014, 34(4): 341-347. DING Xuexing, YAN Ruqi, JIA Yonglei. Construction and analysis of fractal contact mechanics model for rough surface based on base length ［J］. Tribology, 2014, 34(4): 341-347. ［10］MORAG Y, ETSION I. Resolving the contradiction of asperities plastic to elastic mode transition in current contact models of fractal rough surfaces ［J］. Wear, 2006, 262(5/6): 624-629. ［11］LIOU J L, CHI M T, LIN J F. A microcontact mo-del developed for sphere- and cylinder-based fractal bodies in contact with a rigid flat surface ［J］. Wear, 2010, 268(3/4): 431-442. ［12］甘立, 原园, 刘凯, 等. 分形粗糙表面弹塑性接触力学模型［J］. 应用力学学报, 2016, 33(5): 738-743. GAN Li, YUAN Yuan, LIU Kai, et al. Fractal rough surface elastic-plastic contact mechanics mode ［J］. Chinese Journal of Applied Mechanics, 2016, 33(5): 738-743. ［13］YAN W, KOMVOPOULOS K. Contact analysis of elastic-plastic fractal surfaces ［J］. Journal of Applied Physics, 1998, 84(7): 3617-3624. ［14］PULLEN J, WILLIAMSON J B P. On the plastic contact of rough surfaces ［J］. Proceedings of the Ro-yal Society A: Mathematical, Physical and Engineering Sciences, 1972, 327(1569): 159-173. ［15］WANG S, KOMVOPOULOS K. A fractal theory of the interfacial temperature distribution in the slow sliding regime: Part I—Elastic contact and heat transfer analysis ［J］. Journal of Tribology, 1994, 116(4): 812-822. ［16］KOMVOPOULOS K, YE N. Three-Dimensional contact analysis of elastic-plastic layered media with fractal surface topographies ［J］. Journal of Tribology, 2001, 123(3): 632-640. ［17］张学良, 陈永会, 温淑花, 等. 考虑弹塑性变形机制的结合面法向接触刚度建模［J］. 振动工程学报, 2015, 28(1): 91-99. ZHANG Xueliang, CHEN Yonghui, WEN Shuhua, et al. Considering elastic-plastic deformation mechanism of the joint surface normal contact stiffness model ［J］. Journal of Vibration Engineering, 2015, 28(1): 91-99.

[1]	张伟, 蒋朝飞, 叶亚楠, 王晓雁, 龚自力, 胡晨, 肖瑶, 顾汉洋. 蒸汽浸没射流冷凝特性实验研究[J]. 上海交通大学学报, 2022, 56(1): 1-13.
[2]	金龙, 易仕和, 霍俊杰, 刘小林, 牛海波. 圆柱型粗糙元诱导的超声速边界层转捩实验研究[J]. 上海交通大学学报, 2021, 55(8): 942-948.
[3]	冯新, 付庄, 王科瑾, 郝高峰. 基于SSP补偿和变频控制的滑环设计[J]. 上海交通大学学报, 2021, 55(7): 814-825.
[4]	刘世奥, 廖晨聪, 陈锦剑, 叶冠林, 夏小和. 饱和砂土-结构物接触面强度特性的三轴试验方法[J]. 上海交通大学学报, 2021, 55(11): 1371-1379.
[5]	徐齐平, 刘锦阳. 多腔体气动软体致动器的建模与仿真[J]. 上海交通大学学报, 2020, 54(6): 551-561.
[6]	张强, 余曜, 迟德建, 朱志鹏, 蒋涛. 柱形装药接触爆炸条件下对钢筋混凝土板的毁伤规律研究[J]. 空天防御, 2020, 3(2): 16-23.
[7]	张东明, 张晓云, 杨小波, 侯心一. 基于正交实验和多项式回归分析方法的非典型接触状态车人碰撞事故参数分析[J]. 上海交通大学学报, 2019, 53(1): 55-61.
[8]	李丽民1,2 ,张国祥2,蒋建清3. 一种基于分形理论的骨架密实型抗车辙级配检验方法[J]. 上海交通大学学报（自然版）, 2018, 52(9): 1125-.
[9]	沈佳瑛，孔维梁，刘洪. 壁面表面能影响冰枝尖端生长机制研究[J]. 上海交通大学学报（自然版）, 2018, 52(8): 918-923.
[10]	陈瑜1，2,滕克难1,唐金国1,王丽英1. 二维海面红外图像分形维数最优估计[J]. 上海交通大学学报（自然版）, 2018, 52(8): 1003-.
[11]	张涛，李德骏，林鸣威，张梦辉，杨灿军. 海底观测网非接触式水下接驳系统的设计与实现[J]. 上海交通大学学报（自然版）, 2018, 52(7): 784-792.
[12]	刘亚风，王新杰，陆飞，王炅. 基于PLZT/PVDF复合驱动的光控微镜平移机构[J]. 上海交通大学学报（自然版）, 2018, 52(7): 837-844.
[13]	杨红军1，卢菲1，车驰东2. 基于尾管后轴承分段弹性接触的船舶推进轴系校中计算[J]. 上海交通大学学报（自然版）, 2018, 52(6): 681-686.
[14]	王志坚，陈晓阳，沈雪瑾. 考虑粗糙峰弹塑性变形和润滑油性质的有限长线接触副混合润滑模型[J]. 上海交通大学学报（自然版）, 2018, 52(5): 525-532.
[15]	臧淑燕，郭峰，李超，栗心明. 限量供油条件下面接触润滑油膜特性[J]. 上海交通大学学报（自然版）, 2018, 52(5): 533-537.