滑动轴承-转子系统中金属阻尼器的减振特性

doi:10.16183/j.cnki.jsjtu.2018.05.017

摘要/Abstract

摘要： 为了探究金属阻尼器对滑动轴承-转子系统减振性能的影响，设计并制造了普通、周向金属阻尼器支撑、径向金属阻尼器支撑的3种滑动轴承，并通过试验研究了含3种轴承的轴承-转子系统的振动特性和稳定性，分析了轴承-转子系统的半速涡动和减振特性.结果表明：与普通滑动轴承相比，金属阻尼器支撑的滑动轴承的加速度幅值显著降低；因为没有明显的半速涡动和异步振动，所以径向金属阻尼器支撑的滑动轴承比周向金属阻尼器支撑的滑动轴承的减振效果更好；由金属阻尼器消散的振动能量有助于提高轴承-转子系统的动态稳定性.

关键词: 滑动轴承, 转子, 金属阻尼器, 减振, 半速涡动

Abstract: In order to investigate the influence of metal damper (MD) on the damping performance of journal bearing-rotor system, three kinds of journal bearings (general journal bearings, journal bearings supported on circular MD, journal bearings supported on radial MD) were designed and manufactured. Experiments were carried out to investigate vibration characteristics and stability of the bearing-rotor system with the above bearings. Half speed vortex and vibration reduction characteristics of the system were analyzed. Results show that there is a significant decrease in acceleration amplitude of the bearings embedded with MD compared to general journal bearings. The journal bearings supported on radial MD have better vibration damping effect than journal bearings supported on circular MD, for there is no obvious half speed vortex and asynchronous vibration. Vibration energy dissipated by MD contributes to improving dynamics stability of the bearing-rotor system.

Key words: journal bearings, rotor, metal damper (MD), vibration damping, half speed vortex

中图分类号:

TB 535

李召伦，王小静，沈轶钒，陈超，董健. 滑动轴承-转子系统中金属阻尼器的减振特性[J]. 上海交通大学学报（自然版）, 2018, 52(5): 612-619.

LI Zhaolun,WANG Xiaojing,SHEN Yifan,CHEN Chao,DONG Jian. Vibration Reduction Characteristics of Metal Damper in Journal Bearing-Rotor System[J]. Journal of Shanghai Jiaotong University, 2018, 52(5): 612-619.

参考文献

［1］RIBEIRO E A, PEREIRA J T, BAVASTRI C A. Passive vibration control in rotor dynamics: Optimization of composed support using viscoelastic materials［J］. Journal of Sound and Vibration, 2015, 351: 43-56. ［2］IBRAHIM R A. Recent advances in nonlinear passive vibration isolators［J］. Journal of Sound and Vibration, 2008, 314(3/4/5): 371-452. ［3］陈利, 陈娇红, 孙敏. 挤压油膜阻尼器在旋转机械中的减振研究［J］. 东方电气评论, 2012, 26(4): 19-24. CHEN Li, CHEN Jiaohong, SUN Min. Vibration and damping research of squeeze film damper in rotating machinery［J］. Dongfang Electric Review, 2012, 26(4): 19-24. ［4］CHEN H, HOU L, CHEN Y. Bifurcation analysis of a rigid-rotor squeeze film damper system with unsymmetrical stiffness supports［J］. Archive of Applied Mechanics, 2017(2): 1-18. ［5］马艳红, 陆宏伟, 朱海雄, 等. 弹性环金属橡胶支撑结构刚度设计与试验验证［J］. 航空学报, 2013, 34(6): 1301-1308. MA Yanhong, LU Hongwei, ZHU Haixiong, et al. Structural stiffness design and experimental evaluation of elastic ring-metal rubber damper［J］. Acta Aeronautica et Astronautica Sinica, 2013, 34(6): 1301-1308. ［6］李胜波, 闫辉, 姜洪源, 等. 圆锥滑动轴承-转子系统中金属橡胶阻尼器力学性能研究［J］. 功能材料, 2011, 42(1): 167-170. LI Shengbo, YAN Hui, JIANG Hongyuan, et al. Research on mechanical properties of metal rubber damper in conical bearing-rotor system［J］. Journal of Functional Materials, 2011, 42(1): 167-170. ［7］TAN Q B, HE G. 3D entangled wire reinforced metallic composites［J］. Materials Science and Engineering A, 2012, 546: 233-238. ［8］FENG K, LIU Y, ZHAO X, et al. Experimental evaluation of the structure characterization of a novel hybrid bump-metal mesh foil bearing［J］. Journal of Tribology, 2016, 138(2): 83-114. ［9］CHILDS D W. The space shuttle main engine high-pressure fuel turbopump rotordynamic instability problem［J］. Journal of Engineering for Gas Turbines and Power, 1978, 100 (1): 48-57. ［10］OKAYASU A, OHTA T, AZUMA T, et al. Vibration problem in the LE-7 LH2 turbopump［C］∥26th Joint Propulsion Conference. Washington, USA: AIAA, 2013. ［11］ERTAS B H, ALKHATEEB E, VANCE J M. Rotordynamic bearing dampers for cryogenic rocket engine turbopumps［J］. Journal of Propulsion and Power, 2012, 19(4): 674-682. ［12］MA Y H, ZHU H X, ZHANG D Y, et al. Experimental investigation on dynamic mechanical behavior of the elastic ring support with metal rubber［C］∥ASME 2013 International Mechanical Engineering Congress and Exposition. California, USA: ASME, 2013: 62739-1-7. ［13］HOU J F, BAI H B, LI D W. Damping capacity measurement of elastic porous wire-mesh material in wide temperature range［J］. Journal of Materials Processing Technology, 2008, 206(1/2/3): 412-418. ［14］ZHANG D Y, SCARPA F, MA Y H, et al. Compression mechanics of nickel-based superalloy metal rubber［J］. Materials Science and Engineering A, 2013, 580: 305-312. ［15］ZHANG D, SCARPA F, MA Y, et al. Dynamic mechanical behavior of nickel-based superalloy metal rubber［J］. Materials & Design, 2014, 56(4): 69-77. ［16］FENG K, ZHAO X, ZHANG Z, et al. Numerical and compact model of metal mesh foil bearings［J］. Tribology Transactions, 2016, 59(3): 480-490 . ［17］邹广平, 刘泽, 唱忠良, 等. 金属丝网橡胶压缩力学性能研究［J］. 实验力学, 2014, 29(6): 676-682. ZOU Guangping, LIU Ze, CHANG Zhongliang, et al. On the compression properties of metal wire mesh rubber［J］. Journal of Experimental Mechanics, 2014, 29(6): 676-682. ［18］张新勇, 段滋华. 滑动轴承油膜振荡故障诊断及在线消除［J］. 润滑与密封, 2008, 33(4): 104-107. ZHANG Xinyong, DUAN Zihua. A study of fault diagnosis and online elimination on oil oscillation of journal bearing system［J］. Lubrication Engineering, 2008, 33(4): 104-107. ［19］CHANDRA N H, SEKHAR A S. Nonlinear damping identification in rotors using wavelet transform［J］. Mechanism and Machine Theory, 2016, 100: 170-183. ［20］齐宇, 梁建设, 柳迎红, 等. 改进的Morlet小波变换在储集层预测中的应用［J］. 新疆石油地质, 2016, 37(5): 598-601. QI Yu, LIANG Jianshe, LIU Yinghong, et al. Application of modified Morlet wavelet transform in re-servoir prediction［J］. Xinjiang Petroleum Geology, 2016, 37(5): 598-601. ［21］HU Z B, YUN X L, JIANG G D, et al. Non-stationary signal purification and rotor axis orbit feature extraction under machine tool spindle cutting process［J］. Applied Mechanics and Materials, 2017, 868: 305-310. ［22］PANG X Y, YANG Z J, YUAN J X, et al. Recognition of torque load for elastic support rotor system based on axis orbit［C］∥13th International Conference on International Conference on Ubiquitous Robots and Ambient Intelligence. Xi’an, China: IEEE, 2016: 830-835.

[1]	秦广菲, 姚慧岚, 张怀新. 螺旋桨脉动压力作用下自航船舶艉部振动数值研究[J]. 上海交通大学学报, 2022, 56(9): 1148-1158.
[2]	牛振宇, 刘林芽, 秦佳良, 左志远. 减振垫层温频变动力性能对无砟轨道振动特性影响[J]. 上海交通大学学报, 2022, 56(9): 1238-1246.
[3]	杨梦姚, 毛璐璐, 韩兆龙, 周岱, 雷航, 曹宇. 三叶片H型垂直轴风力机风振与减振研究[J]. 上海交通大学学报, 2021, 55(4): 347-356.
[4]	谭顿,陶建峰,陈良深,王旭永. 叶片摩擦系数对液压凸轮转子伺服马达转矩性能影响[J]. 上海交通大学学报, 2020, 54(2): 160-166.
[5]	张强，朱彦楠，陶建峰，王旭永. 基于热特性的凸轮转子叶片马达密封间隙优化[J]. 上海交通大学学报, 2019, 53(6): 647-653.
[6]	赵乃龙，王炜哲，刘应征. 主蒸汽温度和压力波动对汽轮机转子蠕变疲劳损伤的影响[J]. 上海交通大学学报（自然版）, 2019, 53(2): 127-133.
[7]	朱彦楠1，张强1，陈立峰2，陶建峰1，王旭永1. 基于效率分析的凸轮转子叶片马达液膜厚度设计[J]. 上海交通大学学报（自然版）, 2018, 52(6): 715-721.
[8]	安成光，曹阳，张建武. 双筒式液压减振器节流孔气穴现象和噪声分析[J]. 上海交通大学学报（自然版）, 2018, 52(3): 297-304.
[9]	丁司懿，金隼，李志敏，魏桢琦，杨夫勇. 航空发动机转子装配同心度的偏差传递模型与优化[J]. 上海交通大学学报（自然版）, 2018, 52(1): 54-62.
[10]	刘晓日1,2，黎明1，张铁臣1，郑清平1，黎苏1，李国祥2. 基于热弹流混合润滑的内燃机滑动轴承零磨损[J]. 上海交通大学学报（自然版）, 2017, 51(1): 62-.
[11]	仲健林1，马大为1，任杰1，李士军2，王旭3. 基于平面应变假设的橡胶圆筒静态受压分析[J]. 上海交通大学学报（自然版）, 2015, 49(09): 1276-1280.
[12]	赵乃龙1a,1b，吴穹1a,1b，王炜哲1a,1b，张军辉2. 超超临界汽轮机高压转子低周疲劳及损伤分析[J]. 上海交通大学学报（自然版）, 2015, 49(05): 590-594.
[13]	徐川辉1，王旭永1，陶建峰1，张文俊1，苗中华2. 叶片马达凸轮转子过渡曲线特性分析[J]. 上海交通大学学报（自然版）, 2014, 48(1): 1-5.
[14]	赵刚1，竺晓程1，何磊2，王姣2，黄启鹤2，杜朝辉1. 机匣附面层对涡轮转子叶顶流动及换热的影响[J]. 上海交通大学学报（自然版）, 2014, 48(09): 1279-1285.
[15]	李明，李富才，李鸿光，孟光. 浅裂纹转子特性的动态圣维南原理解释[J]. 上海交通大学学报（自然版）, 2014, 48(06): 870-876.