考虑生产线平衡的串-并联生产系统机会维护策略

摘要/Abstract

摘要：

摘要：以多工序多台设备组成的串并联生产系统为研究对象，根据生产线平衡原理，在每次预防性维护时引入机会维护，以实现设备的充分利用；采用可靠度恢复因子描述设备维护前后的可靠度演变过程，建立了以可靠度、总成本最小为优化目标的串并联生产系统预防性维护和机会维护模型，采用蒙特卡洛仿真方法获得最优的预防性维护和机会维护的阈值，从而得到了满意的维护计划.应用实例结果表明，所提出的方法能够为串并联生产系统提出合理的维护计划.在保证不发生系统停产的基础上，能够充分实现机会维护，降低企业设备的维护费用.

关键词: , 串-并联生产系统, 生产线平衡, 机会维护, 蒙特卡洛仿真, 维护计划

Abstract:

Abstract： Proper maintenance schedule is required to improve the profitability and productivity of manufacturing systems. Thus, an opportunistic preventive maintenance model aiming at serial-parallel machining line consisting of much equipment was developed. Considering the specificity of this system, the concept of line balancing was proposed to get a better utilization of the equipment and balance the production capacity of each station. The opportunistic preventive maintenance model was based on reliability and made a target of the minimal maintenance cost. Proper threshold values as well as the maintenance scheme were obtained by Monte Carlo simulation of the model. An applied case shows that the model is practical and efficient to get a proper maintenance schedule for the series-parallel system.

Key words: series-parallel system, production line balancing, opportunistic preventive maintenance, Monte Carlo simulation, maintenance plan

中图分类号:

TH 17

张晓文，孙小明，蒋祖华，胡家文. 考虑生产线平衡的串-并联生产系统机会维护策略[J]. 上海交通大学学报（自然版）, 2015, 49(05): 702-707.

ZHANG Xiaowen,SUN Xiaoming,JIANG Zuhua,HU Jiawen. Opportunistic Preventive Maintenance Strategy for Series-Parallel System Considering Line Balancing[J]. Journal of Shanghai Jiaotong University, 2015, 49(05): 702-707.

参考文献

［1］Cui L R, Li H J. Opportunistic maintenance for multicomponent shock models ［J］. Mathematical Methods of Operations Research, 2006, 63(3): 493511.

［2］Zhou X, Xi L, Lee J. Opportunistic preventive maintenance scheduling for a Multiunit series system based on dynamic programming ［J］. International Journal of Production Economics, 2009, 118(2): 361366.

［3］Wang H Z, Pham H. Availability and maintenance of series systems subject to imperfect repair and correlated failure and repair ［J］. European Journal of Operational Research, 2006, 174(3): 17061722.

［4］Zhou X J, Lu Z Q, Xi L F. Preventive maintenance optimization for a multicomponent system under changing job shop schedule ［J］. Reliability Engineering and System Safety, 2012, 101(1): 1420.

［5］Tsai Y T, Wang K S, Tsai L C. A study of availabilitycentered preventive maintenance for multicomponent systems ［J］. Reliability Engineering and System Safety, 2004, 84(3): 261270.

［6］Zhou X, Xi L, Lee J. Reliability centered predictive maintenance scheduling for a continuously monitored system subject to degradation ［J］. Reliability Engineering and System Safety, 2007, 92(4): 530540.

［7］朱海平, 郭磊, 刘繁茂, 等. 生产批量约束下的串并联系统选择性维修方法［J］. 计算机集成制造系统, 2011,17(2): 419424.

ZHU Haiping, GUO Lei, LIU Fanmao, et al. Selective maintenance method for seriesparallel system under production lot constraint ［J］. Computer Integrated Manufacturing Systems, 2011, 17(2): 419424.

［8］侯文瑞, 蒋祖华, 金玉兰. 基于可靠度的多设备混联系统机会维护模型［J］. 上海交通大学学报, 2009, 43(4): 658662.

HOU Wenrui, JIANG Zuhua, JIN Yulan. Reliabilitybased opportunistic preventive maintenance model of multiunits serial parallel system ［J］. Journal of Shanghai Jiaotong University, 2009, 43(4): 658662.

［9］Xia T B, Xi L F, Zhou X J, et al. Dynamic maintenance decisionmaking for seriesparallel manufacturing system based on MAMMTW methodology ［J］. European Journal of Operation Research, 2012, 221(1): 231240.

［10］夏唐斌, 奚立峰, 周晓军, 等. 串并联衰退系统的多目标预防性维护优化建模［J］. 计算机集成制造系统, 2010, 16(4): 783788.

XIA Tangbin, XI Lifeng, ZHOU Xiaojun, et al. Optimization of multiobjective preventive maintenance for serialsparallel deteriorating systems ［J］. Computer Integrated Manufacturing Systems, 2010, 16(4): 783788.

［11］侯文瑞, 蒋祖华, 金玉兰. 基于可靠度的多部件系统机会维护模型［J］. 系统工程与电子技术, 2008, 30(9): 18051808.

HOU Wenrui, JIANG Zuhua, JIN Yulan. Opportunistic preventive maintenance model of multicomponents system based on reliability ［J］. Systems Engineering and Electronics, 2008, 30(9): 18051808.

[1]	王聚团, 戚晓宁, 黄志明. 水下生产管汇测试技术及其改进研究[J]. 海洋工程装备与技术, 2022, 9(2): 43-49.
[2]	袁振钦, 邹科, 孙亚峰, 刘刚, 屈衍, 李居跃. 基于时域分析法的动态电缆疲劳分析[J]. 海洋工程装备与技术, 2022, 9(2): 50-55.
[3]	王娟, 杨明旺, 郑茂尧, 刘凌云, 赵立君. 高强钢在大型半潜式平台组块建造中的应用[J]. 海洋工程装备与技术, 2022, 9(1): 27-31.
[4]	陈欣, 赵晓磊, 王立坤, 肖德明, 张腾月. 深水大型吸力锚建造技术研究[J]. 海洋工程装备与技术, 2022, 9(1): 32-36.
[5]	尹彦坤, 易涤非. 半潜式生产平台船体结构关键节点工程临界评估[J]. 海洋工程装备与技术, 2022, 9(1): 52-57.
[6]	ZHANG Shengfa (张胜发), TANG Na (唐纳), SHEN Guofeng (沈国峰), WANG Han (王悍), QIAO Shan (乔杉). Universal Software Architecture of Magnetic Resonance-Guided Focused Ultrasound Surgery System and Experimental Study[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 471-481.
[7]	MA Qunsheng (马群圣), CEN Xingxing (岑星星), YUAN Junyi (袁骏毅), HOU Xumin (侯旭敏). Word Embedding Bootstrapped Deep Active Learning Method to Information Extraction on Chinese Electronic Medical Record[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(4): 494-502.
[8]	安庆升, 孙立东, 武秋生. 碳纤维增强复合材料发射筒设计研究[J]. 空天防御, 2021, 4(2): 13-.
[9]	KONG Xiangqiang (孔祥强), MENG Xiangxi (孟祥熙), LI Jianbo (李见波), SHANG Yanping (尚燕平), CUI Fulin (崔福林) . Comparative Study on Two-Stage Absorption Refrigeration Systems with Different Working Pairs[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 155-162.
[10]	ZHUANG Weimin (庄蔚敏), WANG Pengyue (王鹏跃), AO Wenhong (熬文宏), CHEN Gang (陈刚) . Experiment and Simulation of Impact Response of Woven CFRP Laminates with Different Stacking Angles[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 218-230.
[11]	宁小涵, 周晓军. 考虑随机生产等待的串行生产系统机会维护建模[J]. 上海交通大学学报, 2021, 55(10): 1281-1290.
[12]	ZHOU Xuhui (周旭辉), ZHANG Wenguang (张文光), XIE Jie (谢颉). Effects of Micro-Milling and Laser Engraving on Processing Quality and Implantation Mechanics of PEG-Dexamethasone Coated Neural Probe[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 1-9.
[13]	HUANG Ningning (黄宁宁), MA Yixin (马艺馨), ZHANG Mingzhu (张明珠), GE Hao (葛浩), WU Huawei (吴华伟). Finite Element Modeling of Human Thorax Based on MRI Images for EIT Image Reconstruction[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(1): 33-39.
[14]	WANG Xianjin, GAO Xu, YU Kuigang . Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 706-713.
[15]	QIAO Xing, MA Dan, YAO Xuliang, FENG Baolin. Stability and Numerical Analysis of a Standby System[J]. J Shanghai Jiaotong Univ Sci, 2020, 25(6): 769-778.